D-Link DIR-655 :: Router Randomly Disables Port From Being Forwarded
May 8, 2013
I have a webserver running and have port80 open to recieve requests. Every once in awhile the router randomly disables this port from being forwarded. It is only this port none of the other ports I have open are disabled. I tried switching the server to another port but had the same problem.I have assume its some kind of security feature, since the server gets many requrests that it shuts down the port?
View 1 Replies
ADVERTISEMENT
Feb 6, 2012
I have a western digital USB 2tb drive. It works great on my intranet (my laptops and other devices can access it). I have a sticky Ip address and would like to be able to access my drive from my work, but I don't know how to set up or if it can be set up to work. Can the USB be port forwarded? I have the E3200 router, Windows 7 OS (if needed)
View 4 Replies
View Related
Sep 18, 2012
I have recently purchased an EA4500 router. I assigned my sons XBOX a static IP via DHCP reservation (outside of the standard DHCP range). I set up single port forwarding on all the standard xbox required ports. Once I click the "enabled" box, I am unable to access the internet from any of the computers connected to the router. If I uncheck the enable box, I am instantly able to access the internet.
View 4 Replies
View Related
Nov 18, 2011
I have a linksys E3000 and a WD My Book World Edition 2. (WDMBWE2)What i want is to access my WD from any where. I have tried setting up a simple single port forward to the WDMBWE2, which worked great. I was able to view all my files from anywhere.however, i wasn't prompted for any login.so basically anyone could access and modify all my data.I have obviously deactivated this again.
I have already tried setting up user accounts on my WDMBWE2 to try and solve this, but that only creates the problem of my TV and music player not being able to access it anymore(they both cant type in login information).Is there any way to make the E3000 prompt me a for login/password when requesting that port?
View 1 Replies
View Related
Jan 6, 2013
I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my thomson TG787. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. But it's still blocked. It's simply doesn't work..I'm 100% I fixed it on the router.
View 21 Replies
View Related
Jan 23, 2011
I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my netgear wnd3700. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. Everything should be cool, but still, checking with canyouseeme.org and asking friends to join. It is still blocked. It simply doesn't work.. I checked my router for any firewall but couldnt see any.. So yeah I'm 100% I fixed it on the router, unless someone is gonna tell me that there is still an option in the router that might fix it.. but I think I did something wrong in the firewall..Although I have been trying to get this to work all day.. I'd rather get some advice on the firewall or other options in my router. Btw, I am using AVG free edition, and I am pretty sure there is no firewall in that version, but there might be something I have to disable in order for this to work ?
View 15 Replies
View Related
Jul 20, 2012
i'm trying to use VNC as a remote desktop i was told to forward port 5900 in order to connect. but whatever i do i still an error saying that the port is not forwarded..Connection test failed.VNC Server appears to be behind a NAT router with IP address x.x.x.x. You will need to configure that router to forward port 5900 to this computer before you can connect to VNC Server over the Internet.as you can see here the port is forwarded to the server computers local IP.i have no firewalls active, and no anti-virus software that could be blocking VNC.
View 1 Replies
View Related
Aug 15, 2012
I am experiencing the same problem described in this post {URL}. I have seen this happen on different networks, with different equipment attached. It happens on both 2960 and 3750 switches. Basically the connection drops, and we see in the web interface "Port is Disabled". This appears to happen every 10 minutes.
On the CLI, the status shows as connected.
Port Name Status V lan Duplex Speed Type
Fa0/38 connected 1 a-full a-100 10/100BaseTX
I have ran cable diagnostics while the drop out is occurring.
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ----------------- ----------- -------------------
Fa0/38 100M Pair A 28 +/- 15 meters Pair B Normal
[code]...
During the outage, I see the duplex fluctuate between full and half. The outage occurs for approx 90 seconds. If I fix the duplex and speed at both ends, the outage reduces to around 30 seconds. If I apply spanning-tree port fast the outage reduces further to around 10 seconds. Before I change any configuration on the port, the logs show the interface going down
Aug 16 13:06:51.875: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to down
Aug 16 13:06:52.874: %LINK-3-UPDOWN: Interface FastEthernet0/38, changed state to down
[code]...
However, once I apply the configuration nothing is logged. However we can still see the connection is disappearing for around 10 seconds. I suspect the issue wasn't resolved for the person reporting the problem in the link above, but because the outage is minimized, and not being logged it is going unnoticed.
View 30 Replies
View Related
Apr 6, 2012
i have been trying to forward port 25565 for a server on a game called minecraft. I have a bt homehub 2 and i have followed everything on portforward.com and on several videos and still no luck. I have B.T net protect plus so I don't know if the firewall is blocking the port
View 1 Replies
View Related
Nov 4, 2011
Why is loop-back only working on ports forwarded in the Virtual Server section and not Port Forwarding or even DMZ? I have seen a post about loop-back on the DIR-655 from a while ago that had said to disable SPI and change NAT Endpoint to independent, I have done this and loop-back still doesn't work.
View 1 Replies
View Related
Jan 9, 2011
For the past few months my router has been randomly disconnecting me and everyone who is connected to the router from the internet from anywhere between 10 seconds and 1 min and i can't seem to figure out what has been causing this. It can happen multiple times a day or it can go for a week without happening. it makes playing online games extremely annoying.
Hardware Version: A4
Firmware Version: 1.32NA
View 3 Replies
View Related
Jul 20, 2011
My DIR-655 wireless router randomly quit working. It was plugged into my modem and working great, then it just stopped. I restarted my modem and router, but the "Ethernet" light on my modem does NOT shine when plugged into the router.
I'm sure that the modem is fine, as I have it connected to my PC right now. I also tried it with my friend's wireless router - works fine.
I believe this may be hardware-related. I have tried restoring the router to factory settings and then setting up everything again: No luck.
I haven't had this router for long! Just a little over two years I believe (or it may be just a little over one). I have another wireless router somewhere that's 6-7 years old and still works. If it is hardware related (as in the router just randomly broke), then rest assured I will not be purchasing another D-Link router in the future.
View 1 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
Dec 9, 2012
I have been using Linksys routers for quite some time now, and recently made a big upgrade from the WRT54G to the E3000. I am familiar with the 192.168.1.1 interface and its functionality. However, I recently noticed a problem: when I set a port to forward traffic to any IP address on my network and then check whether or not it is actually open (url...), I am told that the port is still closed. More interestingly still, the first port that I forwarded when I first got the router is listed as open, but the other half dozen or so are still considered closed. I have been trying to set up a file transfer protocol (FTP) server, but can't even get traffic to forward from port 21! I even tried using the pre-configured FTP drop down on the Applications & Gaming tab, but to no avail. Has anyone had similar issues, or perhaps an idea as to why only one port is forwarded when I have followed the same steps that I have been using for years?
I tried to get in touch with Technical Support about this issue, but was told that I needed to purchase a $30 subscription in order to qualify for assistance. I don't think that I should have to pay $30 to know why the same steps work with some ports but not with others.
View 9 Replies
View Related
May 3, 2013
I have a domain name which I register to my WAN address so I can do service hosting from my home network. I recently switched out my WRT54G running DDWRT with an EA2700. I set up my port forwards and static dhcp assignments and they are working from outside my network, but when I try any network operation involving my WAN address from my LAN machines, the connections just timeout.
I read in some posts that "you cannot do this" and "you have to test from a remote internet machine". Well, this WORKED with DDWRT, so it's not like it's impossible to make a router that does this. Why can't I do this with the EA2700? Is there some magic setting that will let this work??
The whole point of using a domain name is that I can access my services ANYWHERE using the convenient "name" thing.. genius, right? Except when I bring my laptop home and suddenly my domain goes non-responsive.
View 4 Replies
View Related
Jan 24, 2011
I have a B1, FW 2.00NA. Everything works great, but once or twice a day, randomly the wifi signal will just dropout, I cant see it in my networks list, if I connect directly to my router the connection is fine. If I reset the router by cutting power wifi will start working again. Is there an beta firmware for the B1 I can try? Everything on the router is set to pretty much default.
View 2 Replies
View Related
Jun 23, 2012
I'm no good with computers, or anything like that; but this since about two days ago, my internet has been cutting in and out. One minute it will work fine, then a few minutes later it will disconnect, and then reconnect a few minutes later.I noticed that the globe symbol on my router either flashes when this occurs, or the power button turns orange. Why this is happening, and why it is happening all of a sudden ?
View 6 Replies
View Related
Nov 18, 2012
A few months ago, I swapped out my venerable D-Link DI-524 router for a newer DIR-655 that I'd had for a bit but had not been using as a router.
From a fresh reboot, everything will be fine. But after a while, where a "while" can be anywhere from a few hours to a few days, my internet connection will slow to the point that it's almost unusable. This applies to wired connections as well as wireless. At that point, I've found that a simple release/renew in the router's "Tools" menu will temporarily correct the issue, but then it bogs down again after the aforementioned "while". And whether I release/renew, or do a full reboot of the router, the cycle basically repeats. Sometimes I'll have to hard reboot it, because if I let the connection get too bad, it will get to a point where any browser will take a half hour just to load the router's page.
I'm pretty sure it's the router and not the ISP, because I hadn't had this issue with the DI-524; and after running a large overnight data transfer with a machine connected directly to the cable modem, Speedtest didn't show any slowdown (at that point, Speedtest will usually show a major slowdown when going through the router, even if the network doesn't "feel" sluggish).
Here's a rundown of my network setup and my current router configuration.Hardware version: B1, Firmware version: 2.03NA,My ISP is RoadRunner (Time Warner), which is a cable modem-based service.
I run an Amahi server that is directly wired to the router. I am running both a DHCP server and a DNS on that machine. As a consequence, I have "Enable DHCP Server" and "Enable DNS Relay" unchecked on the router's Setup->Network Settings page.
Connected directly to the DIR-655 are the Amahi server (Gigabit), a D-Link DGS-2208 switch, a TP-Link 100Mb switch, and a VOIP phone.
Connection Type: DHCP Client
Cable Status: Connected
Network Status: Established
StreamEngine: Disabled
Primary DNS Server: 192.168.0.5
Secondary DNS Server: 192.168.0.5
Advanced DNS: Disabled
View 14 Replies
View Related
Feb 19, 2013
My DIR655 is about a month old, works fine but randomly resets to factory default (loses configuration). Used it to get internet from an existing wired connection with gateway 192.168.0.1, therefore changed Network address of Dlink to 192.168.1.1 to make it work. Every so many days of working ok, it suddenly resets to factory default with no one touching the reset button. Have to restore the configuration from saved file which is a hassle.
Although the DIR655 is connected to a UPS, it shouldn't lose the settings during blackouts right?
View 1 Replies
View Related
May 12, 2011
I am using a D-Link DIR-655 REV B (Firmware: 2.00NA) wireless router. The problem I keep having is that the internet will randomly disconnect and it happens to all my computers. I am not sure if it is the router or the modem that is causing this. The internet service provider that I am using is Time Warner Cable and the modem is an ARRIS TM502G.I have tried resetting the modem and the internet seems to come back. Same thing happens if I try to reset the router instead of the modem. I have also tried restoring the router to factory default settings and that didn't seem to work.
View 11 Replies
View Related
Apr 4, 2011
I have a DIR-625 router that has been acting odd lately. Several times a day at random my devices (laptop, android phones, PS3) will lose internet connectivity from my wireless network. They say they are still connected to the network but I am unable to access the internet or even the router config page. Everything works fine on Wired LAN computers. The only way I can fix it is by unplugging the router for a few seconds. I have had the router for over a year now without this problem. Seems like it may have started when we got our android phones.
View 6 Replies
View Related
Feb 13, 2012
My computers Network adapter (integrated with the motherboard 'no fancy stuff') disables, though only when I'm putting a bit of pressure on the system. i.e. when playing skyrim etc.I have resolved the issue temporarily by connecting straight to the computer instead of the inbetween switch, but at the cost of only being able to connect this computer at home. The strange thing in my opinion however is that when we have 3-4 computers all connected through the switch, only this one has this error that keeps occuring.I've checked into the power savings settings, as I'm conviced it's some kind of setting on my machine, and set them to max performance as well as disabling windows from beeing able to disable the NIC to save power.
View 11 Replies
View Related
Oct 10, 2011
The modem connects to a D-Link DIR-655 which connects to a computer (Vista) and a switch, the switch then connects to another computer (Win7) and an xbox. the problem is that the vista computer will randomly connect and disconnect from the internet/ network. The vista computer also generally runs very slow on the internet. The Win7 computer runs perfectly and there is never an issue, so I'm wondering if the problem has to do with the vista computer not being connected to the switch? It is not an issue with the router, I have tried two already and the same issue occurs.the vista computer is running with a Gigabyte GA-EP45-UD3R which has a Realtek 8111C LAN chipset.
View 5 Replies
View Related
Mar 24, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Infostrada
My TD-W8970 freezes randomly, sometimes several times a day, sometimes less, but now the problem it's more frequent and I suppose it could be generated by some internal component that could have a abnormal behavior.Anyway, this happens in different situations, either using all the functionalist, or being only on and in idle state. Last time was few minutes ago, when all the system were shuttled down and only router was on.
View 1 Replies
View Related
Nov 28, 2012
If you are using DAP-1522 A1 and set to 5GHz 802.11 n bridge mode but disconnect randomly. Don't bother to do any troubleshooting because DAP-1522 A1 only support 802.11 draft n and incompatible with 802.11 n. If unit still under warranty then call D-Link and request unit replacement and ask for hardware reversion B1.
A1 - Ralink RT2880+RT2850 chips
[URL]
B1 - Ralink RT3662 chip
[URL]
View 6 Replies
View Related
Jan 13, 2011
For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.
A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)
Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.
View 12 Replies
View Related
Feb 14, 2013
Region : UnitedStates
Model : TD-W8968
Hardware Version : V4
Firmware Version : 1.1.1 Build 120912 Rel.67406
ISP : centurylink
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.1.1 Build 120912 Rel.67406
ISP : centurylink
First a bit of background. At the end of December, my centurylink modem finally had enough problems with disconnects(was 6 or 7 years old), and Centurylink sent out a new router/modem. The new modem/router, a Zyxel, worked great, and all was good in my house hold. Then I got the bill and found out that unlike the previous modem they had sent me, this one I was paying a lease payment for. At which point I returned the Zyxel which gave us the best service we'd ever had, and bought this TD-W8960N. The reviews were glowing, setup was easy, but we started rather quickly to have disconnects. A call was made to Centurylink and they confirmed service was working, and since the modem/router was not theirs, referred us back to you. I called and after considerable time on the phone, all I was basically told to do was a hard reset to the modem. When the unit finished booting back up, internet was restored. Of course it was restored everytime we reset it for a while. At that point I was told that since the unit was working, that there was nothing left to be done. Since that time, it has disconnected us from time to time, and then in the last 2 days, sometimes it won't stay connected for more than a couple of minutes. My wife is very unhappy-she is a gamer, and a disconnecting internet is very very bad for an online gamer.
It seems that the further it gets away from a hard reset,the more it disconnects. After 6 soft resets (unplugging) today, I had to do another hard reset to get back on to register here and post this message. Is this a known problem for this unit? Is there a fix for this unit? Or, do I just need to return it to Newegg and try another manufacturer?
Again, the "leased" Zyxel gave us no problems for the month or so that we used it.
View 5 Replies
View Related
Oct 3, 2011
1. Internet works ok, everything is fine, but then it stops working for no reason.
2. I open Network and Sharing Center, and do diagnostics. They come up with result: "the default gateway is not available". Nothing works. But Local Area Connection and Network Controller are both enabled.
3. I have to restart computer for the internet to work again. However, it doesn't restart: it hangs forever in "shutting down" screen, and nothing happens. Probably because computer is still trying to connect to the internet (?)
4. After forced restart, internet doesn't work, but if I run diagnostics again, they come up with result: "The Local Area Connection adapter is disabled", and fixes it automatically. Internet works then.
View 9 Replies
View Related
Mar 30, 2011
Whichever download manager I use, when ever it starts downloading for a bit it somehow manages to disable the wifi on my router. This makes it impossible for me to leave things going over night which is annoying. It happens with IDM and Jdownloader.
View 1 Replies
View Related
May 30, 2011
We have a customer running a RV 120W, and if the internet connection is disconnected it disables NAT, and you have to log on to the setup and enable it again. This is very annoying if the net connection goes down as you have to manually fix, why it does this and how to make it enable NAt by default?
View 4 Replies
View Related
Jan 19, 2013
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP : TPG
I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?
View 5 Replies
View Related
Dec 14, 2011
I have a dir-655 xtreme N gigabit router with 2.03NA version firmware. The wireless signal will suddenly and randomly disappear from my laptop. I checked the properties of the network connected it remains on the same channel when it reconnects so I figure it's not a channel issue.I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from stopping.
Computer: dell inspiron 6400
OS: windows XP pro (sp3)
ISP service: DSL
Modem: stand alone (Sagemcom 4300)
Router: dlink / xtremeN gigabit router / dir655
Set for mixed g, n and b wireless mode
Security: wpa-personnal / TKIP
Firmware: version 2.03NA
View 14 Replies
View Related
Jun 20, 2011
Have several DCS-5300 cameras (firmware 1.06) and randomly the cameras will reboot.
D-Link says to set to factory default, but that is not physically possible.
View 1 Replies
View Related
