Netgear WGR614 V6 Will New Router Work With Old Laptop
Sep 27, 2011
I need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.
Can't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.
i am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?
I have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.
I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?
I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?
I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
I bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
I have a Netgear wireless router(WGR614 v9) and im trying to connect a second laptop to it. The laptop is accessing the internet when I have it connected to my modem via Cat 5 Patch cable.When I detach the cable from the laptop and modem, it doesn't connect to the internet. I went through the whole installing with the cd that comes with the router but after I finish I get the same results.
According to System properties:
Microsoft Windows XP (theres a sticker on my laptop for Windows Vista) Home Edition Version 2002 Service Pack 3
Posted below is my computer info from using ipconfig.
My primary home wireless is a Linksys WRT54GS Broadband Router. I have an older Netgear WGR614 Wireless Router that I would like to setup as a wireless bridge to use in another room to connect my other electronics to (i.e tv, blu-ray, Wii).
At my office we have a simple network using a Netgear WGR614 V7 router. 4 XP machines are connected via Ethernet cable and three other people are connected wirelessly (one XP laptop, one Win7 laptop and one Win 7 netbook). It appears that whenever the netbook is on the network, the other two laptops lose connectivity. The wired machines are fine. Power cycling the router and rebooting usually solves the problem.
I've two routers, one which i got from BSNL when opted for internet connection. Its a Utstartcom Type II wireless modem and the other which i got from a friend is Netgear WGR614 wireless modem/router.Now coming to the real picture. I've the BSNL wireless modem connected and working perfectly on the 3rd floor on one PC, but NOT configured for wireless access and i've another PC on Ground Floor where i need an internet connection. Fortunately, i got a router/modem which is Netgear WGR614. I do not want a wired connection between these two PCs then wanted to try the wireless way?
I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.
Below is what i got from ipconfig /all using a wired connection to my router.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Userschenupan>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : CGPC Primary Dns Suffix . . . . . . . :
I have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know
I replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
I got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersKellan>ipconfig/all Windows IP Configuration Host Name . . . . . . . . . . . . : Kellan-PC Primary Dns Suffix . . . . . . . :
I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.
I have a desktop and a laptop..Netgear for wifi...All worked fine until I disconnected my desktop....Now the only way my laptop will work is if plug it into the ethernet...making it a desktop of sorts...How do I fix this so it will work wherever I want it to?
connecting my old laptop to my router (Netgear WNDR3700v2) The router is an N router but is backwards compatible, but my laptop can't find it. The laptop is an LG LE50-5273V. I looked into the device manager and found two network adapters; 802.11b/g wireless adapter and Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller. So it should be able to connect to it? Besides from that laptop I have another PC connected to the router and it works (Using N), Will I then be able to combine both N with B/G?
Just bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.
The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.
I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.
We have a BRAND NEW Netgear CG3000D-RG wireless router (modem). We have had this modem for just about two months, and have 3 laptops in the house and a XBox 360. We have screaming signal @ 50 megs. However my wifes Compaq Laptop keeps kicking her off the internet. The homepage will load, and sometimes MAYBE one more screen. But then nothing else will load, and the signal bars at the bottom right of the screen get an exclamation point. No other computers have ANY problems, nor does the XBox (which is the only thing that is actually hardwired).
My laptop is unable to connect to our router unless I am right next to it. I am in a split level house. When I go downstairs in our family room the laptop will not connect or is very slow loading. Once I move the laptop next to the router everything is fine.
The lap top is an HP Pavilion with Windows 7. The router is netgear n750 WNDR4000. :Laptop was connected to internet this afternoon now this evening I have problems.
I have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
Have netgear wireless internet router from ISP and both pc and laptop have wireless internet access but are not networked together. Don't need to network the two but wish to add wireless printer so can print from each computer. Have ethernet cable connecting wireless printer to router. Will computers now communicate (seperately) with the printer for software installation and subsequent printing use?
basically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.
i have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
I'm trying to connect my cannon printer to my laptop. I have a Netgear Wireless Router. My wifi is passworded. I can't get past the access point. I'm stuck in set up mode. It wants me to hold down the access point on my router and I don't have an access point button on the router.
