Have netgear wireless internet router from ISP and both pc and laptop have wireless internet access but are not networked together. Don't need to network the two but wish to add wireless printer so can print from each computer. Have ethernet cable connecting wireless printer to router. Will computers now communicate (seperately) with the printer for software installation and subsequent printing use?
View 2 RepliesI'm trying to connect my cannon printer to my laptop. I have a Netgear Wireless Router. My wifi is passworded. I can't get past the access point. I'm stuck in set up mode. It wants me to hold down the access point on my router and I don't have an access point button on the router.
View 1 Replies View RelatedAdded a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
I need to set up existing printer & Scanned to work wire lees with wireless router that is installed in my home.
View 1 Replies View RelatedHow do I get forgotten password For netgear router free without upsetting existing settings ?
View 1 Replies View RelatedI have an existing Ethernet 100meg LAN and I want to add a wireless capability. I have looked at some products and it is confusing. Range extenders for about 40-50 UK GBP (equiv $65 US). Eg Netgear WN3000RP or WN2000RPT. But they mention extending the range of an existing wireless network?
View 2 Replies View RelatedHaving some problems connecting up my "new" AP My current set-up consists of a Netgear "Virgin Superhub" cable modem/wireless router, a ZyXEL WRE2205 (repeater) in the hall on the first floor, and Ethernet connections through to a number of rooms, including the loft. I can't get wireless access in the loft, and I want to put the AP up there, connected through Ethernet. I want to use the same SSID and security for the AP as on the router and repeater so I can roam around(!) That's possible isn't it?What I've done so far (which hasn't worked) is connected via laptop to AP, set AP into AP mode(!), set the AP to dynamic IP, set the SSID / security the same as the router/repeater, plugged the AP into the Ethernet and tried to connect.
View 7 Replies View RelatedI'm trying to connect a PC to an existing wireless Modem which has a laptop already using it. I've somehow deleted the wireless connection symbol from the bar at the bottom.
View 9 Replies View Relatedmy netgear router is blocking my printer
View 1 Replies View RelatedHow can I connect a vista laptop to existing wireless home network with other 3 [COLOR=#000096 !important][COLOR=#000096 !important]xp[/COLOR][/COLOR] machines.I followed googled info but keep chasing my tail as all effords end trying to make an internet connection. [code] is Negear wired & wireless capable in which 2 PCs are wired & an Acer netbook wireless connected, all 3 XP machines.
View 1 Replies View RelatedMy HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.
View 3 Replies View RelatedWe have a BRAND NEW Netgear CG3000D-RG wireless router (modem). We have had this modem for just about two months, and have 3 laptops in the house and a XBox 360. We have screaming signal @ 50 megs. However my wifes Compaq Laptop keeps kicking her off the internet. The homepage will load, and sometimes MAYBE one more screen. But then nothing else will load, and the signal bars at the bottom right of the screen get an exclamation point. No other computers have ANY problems, nor does the XBox (which is the only thing that is actually hardwired).
View 7 Replies View RelatedI have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
View 1 Replies View Relatedhave a home Sony VAIO Computer running XP Media Center Edition, Belkin Wireless N Router, HP B209 Wireless printer, 1 year old Lenovo laptop, and an iPhone 4s.I can't make them all play together.I noticed yesterday that my iPhone hadn't been connecting to the WiFi for several days, so I tried to see what might be going on. I tried to force pair the iPhone by turning off Data Connection, which usually forces the WiFi, which it did, but then when I went to a webpage it wouldn't load even though wifi was showing full signals.I then booted up my lenovo laptop, and it connected to the internet and worked like a charm. Then my iPhone4s started working again. Why not now finally set up the wireless aspects of my HP B209 that I've never used, so I can print from my laptop wirelessly, which I've always wanted to do.So I was able to setup the printer after adding the MAC address of the printer to my belkin router by going to the IP address for the router and adding that specific address, I changed NOTHING ELSE.Internet on laptop not working now. It shows my wireless network with full bars in range, but when I go to connect it simply says it cannot connect, right away. I check my phone, wireless GONE again! I tried to force pair the phone, no dice. I "forget the network" on my phone, it still shows available, I connect put in my password and it immediately denies me, I tried un-plugging the router, restarting all computers, un-plugging router -and- restaring all computers, turning off the printer, repeating all previous steps, and finally I went and deleted the MAC address I added to the router, and all of the above did nothing to fix the solution.
View 4 Replies View Relatedi have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies View RelatedI have a desktop and laptop and im on my desktop which has internet...I have a wireless router that is working and its called:NETGEAR WIRELESS-N 150 ROUTER WNR1000V2. The router network comes up on my laptop when I look for avaliable networks but..I try to connect and type in the exact password for the router but says "windows cannot connect to network" On my laptop im running windows vista home premuim service pack 2. This all starte 2 days ago when i knocked the outlet out that ha the power to our computer and i tuned it on and my laptop wont connect
View 5 Replies View RelatedMy Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
I've just bought a new Samsung 3 series laptop (Windows 7 Home Premium 64 bit). I have two braodband lines at my home (1: Sky with standard Sky wireless router. 2: BT with Netgear wireless router). The Netgear router is primarily used for business but I also use it to connect with my old Dell laptop and my iPad. However I cant seem to connect with my new Samsung laptop to the Netgear router. I want to get rid of the Sky broadband line but neet to get the Netgear line working correctly first.If i turn the Netgear router off and then on again the laptop can see the router and picks up the wireless signal and connects for a few minutes before it drops off and then it can find it again. The laptop does similar with the Sky router except that the connection seems to last longer before it drops off and at least it can always see the Sky wireless signal for me to reconnect again.
View 3 Replies View RelatedI bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
View 9 Replies View RelatedHow can I connect my laptop to my printer through my router?
View 1 Replies View RelatedCan I use a router to wifi from my laptop to printer without internet connection?
View 1 Replies View RelatedI have a desktop and a laptop..Netgear for wifi...All worked fine until I disconnected my desktop....Now the only way my laptop will work is if plug it into the ethernet...making it a desktop of sorts...How do I fix this so it will work wherever I want it to?
View 1 Replies View RelatedI have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?
View 2 Replies View Relatedconnecting my old laptop to my router (Netgear WNDR3700v2) The router is an N router but is backwards compatible, but my laptop can't find it. The laptop is an LG LE50-5273V. I looked into the device manager and found two network adapters; 802.11b/g wireless adapter and Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller. So it should be able to connect to it? Besides from that laptop I have another PC connected to the router and it works (Using N), Will I then be able to combine both N with B/G?
View 2 Replies View RelatedJust bought a new Netgear N600 router, hooked up 4 wired computers with no problem and got several wireless devices to hook up without issue. My laptop however, will not give me internet access when accessing the network wirelessly.
The access is labeled as Local Only, and the network is considered unidentified. Signal strength is excellent, and it reads the name of the new wireless server I created. It prompted me to enter the passphrase, which I did, and now my laptop is stuck on local only.
I tried updating my adaptor drivers but they are all up to date, and I tried to enter my adaptor into the address reservation on the router configuration page using the laptops MAC address and IP address.
I need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
View 10 Replies View Relatedcan see printer on the network but it will not connect
View 5 Replies View RelatedI am trying to have both my laptop and brother HL-3070CW printer, wirelessly connect. I go through the entire setup process and all is well. Until the end. It tells me that my security settings are incorrect. Therefore the wireless link status has failed to associate.
View 1 Replies View Relateddo i have to have a separate connection from the printer to the laptop. i only have one connection into power board.
View 1 Replies View RelatedI just picked up a new Windows 7 laptop for my home. My live in girlfriend has a Vista laptop and we both connect wirelessly to our linksys network. We also have a lexmark printer that is connected wireless as well. The Vista laptop has worked and prints fine with the lexmark. Now I have been trying to connect my new laptop to find the printer but when trying to add a new printer or even trying to add a new device windows 7 never finds the printer. I have installed the drivers from lexmark and have even enabled sharing on the printer properties from within the Vista laptop and still my win7 cannot find anything. What can i do to add this printer?
View 4 Replies View RelatedMy laptop is unable to connect to our router unless I am right next to it. I am in a split level house. When I go downstairs in our family room the laptop will not connect or is very slow loading. Once I move the laptop next to the router everything is fine.
The lap top is an HP Pavilion with Windows 7. The router is netgear n750 WNDR4000. :Laptop was connected to internet this afternoon now this evening I have problems.
when i connect my laptop to a wireless HP Photosmart 4500 series printer, printer fails to print.I have to connect it with the USB cable to print.
View 1 Replies View Relatedhow to connect my MSI Laptop with bluetooth and wifi to the Hp 3050 wireless printer?
View 1 Replies View Related