Setting Up Existing Printer And Scanner To Work Wireless

Jun 8, 2012

I need to set up existing printer & Scanned to work wire lees with wireless router that is installed in my home.

View 1 Replies


ADVERTISEMENT

Setting Up New Work Network And Add To Already Existing One?

Jun 4, 2011

.We are setting up a new sales office where there will be between 5-10 users.At the moment, we run everything of one server which has all the file shares, printers. Active Directory etc. I know so far I will need the server cabinet - But my main concern is how I will make this new site connect to the already existing network and the other things which I will need.

View 4 Replies View Related

Hp 4700 Wireless Printer Scanner Error

May 9, 2011

I have a Hp 4700 all in one wireless printer. I am able to print with no problem. I just can't copy or scan. when you first turn the pritner on it comes up with a scan/copy error. I have tired everything and nothing works.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Causes Canon Scanner Not To Work

Apr 13, 2012

Model name: Linksys E4200
Model number: E4200
Firmware version: 2.0.36.126507
Operating system: Windows XP SP 3
Software version: 1.4.12005.2
Connection type (WAN): DHCP
 
My Canon MX882 multifunction printer is connected to the router via USB cable.  The printer works.  The scanner does not work.

View 3 Replies View Related

Added Network Printer But No Scanner Installed?

Feb 8, 2011

I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?

View 5 Replies View Related

Epson Cx8300 Printer - Scanner Not Being Detected?

Feb 27, 2012

I have a multifunctional printer epson cx8300 and have it connected to a print server TP-LINK TL-PS310U in a hope that every PCs on the network can share the printer to do printing and scanning. When I did a test to check if I can send a job to the printer, I could actually print it through the print server. However, the problem now is I can not scan a document. When I went to open windows Fax and Scanner window, unable to see any scanner there. So my question is whether this is the limitation of the epson printer itself or the print server or the scanners do not work on the network.

View 1 Replies View Related

Can't Get Hp Psc 2410 Scanner To Work On Airport Express

May 26, 2011

I cant get hp psc 2410 scanner to work on airport express.I have the printer set up wirelessly but no scanner

View 1 Replies View Related

Add Wireless Printer To Pc And Laptop Via Existing Netgear Router?

Feb 25, 2011

Have netgear wireless internet router from ISP and both pc and laptop have wireless internet access but are not networked together. Don't need to network the two but wish to add wireless printer so can print from each computer. Have ethernet cable connecting wireless printer to router. Will computers now communicate (seperately) with the printer for software installation and subsequent printing use?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G / Setting Up E1200 As Extension To Existing Network?

Apr 20, 2012

I have a WRT54G that has served us well for several years, but I needed a network connection in another part of the house, both wired for TV, and wireless for downstairs.  So I ran an ethernet cable through the house and connected it to my new E1200.  It's connected to Port 1, not the Internet port. The TV plugs into Port 2, and my Apple TV to port 3.  So far so good, TV and Apple TV appear to work fine.   Wireless is where I'm having problems, the wireless signals between the two routers appear on Wifi Analyzer I'm using.  Both appear strong in signal for a second, then they disappear, then they appear again for a second, then they disappear.  So the wifi's signals appear, then disappear and this cycle continues. 
 
The WRT54G is setup with DHCP, channel 6. 

IP Address:    192.168.1.1              Subnet Mask:    255.255.255.0              DHCP Server:    Enabled              Start IP Address:    192.168.1.100               End IP Address:    192.168.1.149
 
The E1200 DHCP is disabled, channel 11, 20mhz.

Router IP Address:  192.168.1.2  Subnet Mask:  255.255.255.0   DHCP Server:  Disabled  Start IP Address:  192.168.1.1   (DHCP disabled)  End IP Address:  192.168.1.50  (DHCP is disabled)

I've tried both routers named the same, and then tried 2 different names.  I've rebooted them as well after making changes. 

View 3 Replies View Related

Cisco Firewall :: Setting Up New ASA 5505 Into Existing Network?

Mar 21, 2013

I am having a problem trying to figure out how to add a new ASA 5505 to an existing network.  My current network is:Cable Modem  >  Linksys  >  48 port switch With multiple hosts residing on the 192.168.0.x network.Now i know that the ASA comes default with 192.168.1.1 on the inside interface and i want to change that to 192.168.0.1.  I have tried to do this thru ASDM using the wizard and manually.  Once i hit ok for it to write the config, it gives me an error that it didnt take.  I then lose connection to the ASA and have to hard boot it to get it back.I am trying to do this without my external connection connected and i have a laptop connected to the ASA on port 0/2 with an IP address of 192.168.1.75.Do i need to connect my internet connection to it first and then run the wizard?  I was hoping to get it configured for my existing network before i plugged in the internet connection to limit my downtime.This ASA came with 6.4.1 ASDM and 8.2 OS installed.  i was able to upgrade the ASDM to 7.X but when i go to update the OS to 9.1, i get an error that i am not registered to use cryptographic software.   Dont know where i need to register to get it?

View 4 Replies View Related

Setting Up HL-22580DW Wireless Printer With 2 PCS?

Jan 20, 2012

I've A brother HL-22580DW Wireless Printer, and two HP desktops (Both running Win7).

Desktop 1- via cable modem and router (Belkin),
Desktop 2- feeding off the routers broadcast,

I've gone through the documentation and a whole bunch of loops trying to figure out how to set it up. PC 1-There's a wireless setup wizard on the printer itself, that scans for SSIDs. The printer sees the router,and instructs me to push the 'WPC' button on the router, which I do. I head back over to the printer, confirm (ok)it attempts to connect, but it always says " Connection Failed ", prints out an error sheet stating that there is no wireless access point or router with "WPC" enabled.i was informed to "ad hoc" and enable the "WLAN" option on the printer, then denoting its own settings, giving it a name,( for testing purposes no password). This was a success.

PC 2- with the wireless adapter, it "sees" the printer, but when i connect to it the wireless bars are never stabilized ( bars appear, blue circle revolves) and while that occurs, I'm able to print from this computer but i'm forced to disconnect from the routers broadcast, leaving that computer netless, and still the connection never appears to be"stabilized".When messing with computer one,The printer never "sees" the Belkin router though it recognizes the SSID prior. with the second printer, I can print documents but I lose net connectivity switching over to the wireless printers broadcast, and the bars at the bottom right aren't 'stabilized'.I've tried disabling the firewall, on both computers, and within the router itself?

View 1 Replies View Related

Cisco Switching/Routing :: 7600 Setting Up Network To Existing One

Sep 29, 2012

I am a soon to be network admin and have never set up a network to an existing network. Steps you need to add a new location to a company's network. For example if they are using 8 Building with 7600 Routers and 6500 and you need another building and they are using MPLS or Private Network, or Internet.

View 4 Replies View Related

Cisco WAN :: 1760 Translate Existing QoS On Adtrans To Work On Routers

May 1, 2013

I currently have a pair of Adtran Netvanta 1224R units that I want to replacce with Cisco 1760 routers. How can I translate the existing QoS (relevant sections below) on the Adtrans to work on the Cisco routers.

View 3 Replies View Related

Setup HP Printer To Work As Wireless Peripheral?

Apr 24, 2012

I want to setup my HP printer to work as wireless peripheral. stand alone. I have my local router working correctly but cannot make HP software to also work by connecting the printer. It seems I need to find WPA security passphrase.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Printer Won't Work

Feb 23, 2013

I've been using this router for several years with a wireless connection to an iPhone, and wired connections to a computer running Windows Vista, a computer running Windows XP (only connected occasionally and never during these tests), a NetTalk telephone ATA, and a Brother printer. I just got a Windows 8 laptop with wireless. I found that the laptop wouldn't connect wired until I cycled power to the router and rebooted the laptop. OK, that's working to get the laptop to the internet. Vista and iPhone are still working. Printer won't work? Use an IP scanner and the printer is just not there although the light on the router is solid for it. Turn off laptop and cycle power and everything else is back to normal. Let's try wireless. Laptop will not connect. Is it something with the printer? Turn off printer, cycle power, and reboot and laptop wireless now works. Turn on printer and printer doesn't work again.  Unplug ATA (hey, it's something to try), cycle power, reboot, everything except telephone is working! Plug ATA back in, no telephone. Cycle power. Back to square one with everything working except laptop. Turn off iPhone, reboot laptop, laptop now OK but printer has disappeared again. Turn iPhone back on and it won't connect either. Cycle power with printer off and everything else works again. 

View 7 Replies View Related

Linksys Wireless Router :: Printer Won't Work With New E3200

Mar 23, 2012

When I installed my new E3200 router, my printer would no longer work from my remote lap top. It works from my desktop where it is installed, but not from the lap top.

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Wireless Printer Won't Work?

May 8, 2012

I have a E4200 router and I was using it with a 1st generation MacBook Air for internet and also had my Samsung laser printer hooked up (USB) for wireless printing. It worked perfectly. Now I have upgraded to a new MacBook Air. The internet connection works fine, but printing won't work. Same printer. Same connections.

Do I need to refresh/reboot something? My new Mac has the printer driver. I get a message "printer if offline" "printer is not connected" -I feel like the router now does not recognize the new Mac's command to print.The older macbook air still works and prints wirelessly. The new one does not.

View 3 Replies View Related

Wireless :: Cannot Get Brother Wireless Network Printer To Work

Apr 8, 2013

I have a Brother HL-2270DW wireless printer. The install seems to go OK , and the printer gets an IP (DHCP) address from the router. But the installation software cannot find the printer to complete the installation. The printer settings (printed after pressing GO button three times) show that the printer has an address, but it will not respond to a ping.

View 5 Replies View Related

Firewall Setting For Printer?

Mar 14, 2011

printer sharing problem

View 1 Replies View Related

Setting Up Printer To Computer

Nov 11, 2011

I need my network password to set up my printer with my computer

View 1 Replies View Related

Setting Up HP LaserJet 4050 Printer

Apr 22, 2012

I configured the HPLaserJet 4050 in my home for two laptops today.

Hardware involved in Setup:
Dlink Wireless Router for the internet connection at home. Two laptops with internet connectivity over wifi - needing the connection to the printer. One HP laserjet 4050 series printer (to be setup) Problem statement: Wanted to connect the Printer over the LAN cable to the wireless router and the laptops should be configured with the printer settings so as to print over wifi network.

Step-1
Power up the printer. Should warm up with the display showing 'READY' message. Do put A4 papers in the printer tray. Connect a one side of the LAN cable to the printer and the other to the router. In the printer : Click the 'Menu' button on the printer. Navigate till you see 'Information Menu' in display. Click the 'Item' button till you see the 'Print Configuration' in display. Now click 'Select' button. The printer should print two pages of printer configuration with the IP address also mentioned on sheet 1.

Step-2
Now from one of the laptops,ping the IP address from your computer system to ensure the connectivity to the printer within the network. Now follow these steps to add the printer:Go to Control Panel / Printers Click Add Printer Select Local (No automatic detect) Create a new port Select the Standard TCP/IP port Enter in the IP address of the Printer Then add in the drivers when requested for the HP, Laserjet 4050 PS. Now finish. It prompts to print the test page. Go ahead and print one to ensure that the printer in setup. Now repeat the Step-2 for any number of laptops in the home. All should get configured and work fine and should be able to print. No need to test for each and waste paper.

Now you can enjoy printing wireless and schedule multiple jobs and users also without efforts.

View 1 Replies View Related

WEP Key Required For Setting Up HP Printer D110

Jun 6, 2011

Im setting up a HP printer, D110, they want my WEP security key.

View 2 Replies View Related

Wireless :: Error Message - Cannot Communicate With Scanner

Sep 25, 2011

i keep getting an error message when i scan. error message: cannot communicate with scanner for these reasons

-scanner is turned off

-scanner is disconnected (it is disconnected from LAN, if using on LAN)BUT MY MACHINE IS ON

View 3 Replies View Related

Linksys Wireless Router :: E4200 Scanner Don't Detected?

Dec 7, 2011

I have installed Ver.1.0.03 (Build 14) Firmware on my E4200 I launch cisco and detct the printer fine prints fine but goes to offline and my scaner in that printer not work My printer is cx7400.

View 1 Replies View Related

Cisco Wireless :: Autonomous 1242 In Scanner Mode?

Mar 8, 2012

we had a problem with a customer wlan in our warehouse (cannel overlapping). The troubleshoot needed a long time. For the future if requipred in case of problems i want to configure one access point in the warehouse as a scanner (please find picture in the attachement). The Autonomous cisco 1242 is now configured as scanner but i can't see any logfiles? Where can i find these informations. This is the cisco description of the scanner mode:Scanner—Functions as a network monitoring device. In the Scanner mode, the access point does not accept associations from clients. It continuously scans and reports wireless traffic it detects from other wireless devices on the wireless LAN. All access points can be configured as a scanner.

View 1 Replies View Related

Setting Up VPN On Work Network?

Oct 19, 2012

The company I work for has a system that our employees clock in on called UNIX (ancient program). I have an iSSH app on my iPhone that I can now log in to as long as I am on our wireless network here at our office. However, I have to travel alot and usually I'm gone during the day that all our time corrections have to be adjusted and turned in. I just log into my Unix program and adjust it...however if I'm out of town I have to do the entire thing over the phone with a lady in our book keeping department and it's incredibly annoying and time consuming. So we're looking for a way to be able to access our system through my iSSH app while on cellular network rather than being here at the office. My administrator wants me to find this out so that all our department heads can do this. I don't have any way of getting our internet provider to set up a port forward, so the only information I have to work with is our static IP address, our default gateway, our subnet mask, and the primary and secondary dns servers.

View 8 Replies View Related

Canon I9900 Printer / Setting Laptop To Print Through Router?

Jan 21, 2013

I have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?

View 2 Replies View Related

Using Home Printer With Work Laptop?

Mar 18, 2012

I have a work provided laptop connected to my home router, and I logon to the work domain using a VPN client. I want to be able to print to a printer that is connected via USB to another computer on my home network. That computer is not allowed to logon to the work domain. Is there a way to do this without making changes to the work computer?

View 5 Replies View Related

Connect Laptop To Wireless Scanner / HPdeskjet 3070B611 Series

Mar 28, 2012

I don't know how to connect my laptop to me wireless scanner, HPdeskjet 3070B611 series

View 1 Replies View Related

Adding Computer To Server In Work Setting

May 2, 2012

I work in a small group with a network server so we can share files and documents from computer to computer. I am trying to access this server on a new computer and am not having any luck finding instructions on how to do so. I don't need to sign in to the network (to gain access to internet browser, etc), I need to be able to add this computer to our server so I can view these folders & files on this new computer.

View 2 Replies View Related

D-Link DIR-601 :: Setting It Up To Work With IPod Touch OS 4.2.1?

Feb 7, 2011

Attempting to connect my iPod to the wireless network.  The SSID is set to visible and the ipod finds the network.  I set the ipod to the security type of the router and have verified the security key.  When I attempt to connect I get a message that says unable to connect to the network.

View 8 Replies View Related

Disable Domain Printer Password In Work Group?

Mar 22, 2011

Disable domain printer password in workgroup?????

View 1 Replies View Related

D-Link DIR-655 And Xbox :: Can't Work With New HP Printer Software 8600 At All?

May 25, 2012

Had to  uninstall pure networks software as wouldnt work with new HP printer software 8600 at all. took me 2 days to figure that out. anyways I am a newbie when comes to networking. I finally got everything to work but I cant get the xbox to connect.   I tried within the software at the IP address but nothing happens, DWA 552,  Software version A2, Firmwre ve 1.1 os/ win xp media 2005.sp 3  computer: made by me: Intel BX97520J (bad axe) cpu: Intel  quad, 6600 2.4 ghz,

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved