WEP Key Required For Setting Up HP Printer D110

I configured the HPLaserJet 4050 in my home for two laptops today.

Hardware involved in Setup:
Dlink Wireless Router for the internet connection at home. Two laptops with internet connectivity over wifi - needing the connection to the printer. One HP laserjet 4050 series printer (to be setup) Problem statement: Wanted to connect the Printer over the LAN cable to the wireless router and the laptops should be configured with the printer settings so as to print over wifi network.

Step-1
Power up the printer. Should warm up with the display showing 'READY' message. Do put A4 papers in the printer tray. Connect a one side of the LAN cable to the printer and the other to the router. In the printer : Click the 'Menu' button on the printer. Navigate till you see 'Information Menu' in display. Click the 'Item' button till you see the 'Print Configuration' in display. Now click 'Select' button. The printer should print two pages of printer configuration with the IP address also mentioned on sheet 1.

Step-2
Now from one of the laptops,ping the IP address from your computer system to ensure the connectivity to the printer within the network. Now follow these steps to add the printer:Go to Control Panel / Printers Click Add Printer Select Local (No automatic detect) Create a new port Select the Standard TCP/IP port Enter in the IP address of the Printer Then add in the drivers when requested for the HP, Laserjet 4050 PS. Now finish. It prompts to print the test page. Go ahead and print one to ensure that the printer in setup. Now repeat the Step-2 for any number of laptops in the home. All should get configured and work fine and should be able to print. No need to test for each and waste paper.

Now you can enjoy printing wireless and schedule multiple jobs and users also without efforts.

View 1 Replies View Related

Setting Up HL-22580DW Wireless Printer With 2 PCS?

Jan 20, 2012

I've A brother HL-22580DW Wireless Printer, and two HP desktops (Both running Win7).

Desktop 1- via cable modem and router (Belkin),
Desktop 2- feeding off the routers broadcast,

I've gone through the documentation and a whole bunch of loops trying to figure out how to set it up. PC 1-There's a wireless setup wizard on the printer itself, that scans for SSIDs. The printer sees the router,and instructs me to push the 'WPC' button on the router, which I do. I head back over to the printer, confirm (ok)it attempts to connect, but it always says " Connection Failed ", prints out an error sheet stating that there is no wireless access point or router with "WPC" enabled.i was informed to "ad hoc" and enable the "WLAN" option on the printer, then denoting its own settings, giving it a name,( for testing purposes no password). This was a success.

PC 2- with the wireless adapter, it "sees" the printer, but when i connect to it the wireless bars are never stabilized ( bars appear, blue circle revolves) and while that occurs, I'm able to print from this computer but i'm forced to disconnect from the routers broadcast, leaving that computer netless, and still the connection never appears to be"stabilized".When messing with computer one,The printer never "sees" the Belkin router though it recognizes the SSID prior. with the second printer, I can print documents but I lose net connectivity switching over to the wireless printers broadcast, and the bars at the bottom right aren't 'stabilized'.I've tried disabling the firewall, on both computers, and within the router itself?

View 1 Replies View Related

Setting Up Existing Printer And Scanner To Work Wireless

Jun 8, 2012

I need to set up existing printer & Scanned to work wire lees with wireless router that is installed in my home.

View 1 Replies View Related

Canon I9900 Printer / Setting Laptop To Print Through Router?

Jan 21, 2013

I have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?

View 2 Replies View Related

Canon MF8300 Printer - Unable To Locate Printer On Network

Mar 21, 2011

I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.

I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.

View 15 Replies View Related

D-Link DIR-655 :: WPS Registered Printer IP Is 0.0.0.0 / Mac Printer MIA

Dec 8, 2011

I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:

1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.

2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.

View 7 Replies View Related

Wireless Security Key Required?

May 20, 2012

I need my security key

View 1 Replies View Related

Crossover Cable Still Required?

Apr 10, 2012

I want to directly connect two Win XP machines together to transfer large files.Both have "Gigabit Ethernet".Its been years since I last did this, and used to need a special cable called a crossover cable to accomplish this, but reading up to refresh my memory I believe I no longer need the special cable, but can use the cable that now connects my cable modem to my computer, as the Gigabit specification eliminates the need for a crossover cable.

View 3 Replies View Related

D-Link DIR-825 :: Setup CD Required / Necessary?

Jul 28, 2012

I have a DIR-825 coming. Do I really need that long to setup something? When I got my Netgear all I did was plug the sucker in. Two ethernet cables in the back. Done. Later on I added a wireless device in the living room so I setup a name and key. Done.I still have the same devices, except going to add my Girlfriends Daughter and QOS her bandwidth.

View 1 Replies View Related

Cisco WAN :: 881 IOS Upgrade Required Due To Bug

May 15, 2011

Due to a bug int the IOS (F4 loosing routing information) i needed to upgrade the IOS from 15.0.1-M4 to the latest one which is 15.1.Is it ok to do without valid Smartnet contract? Cisco website allowed me to download the IOS and then put it on the router.Due you need some sort of a license to upgrade the IOS?

View 3 Replies View Related

Cisco :: LMS 4.0 Evaluation Required

Aug 14, 2011

I'm running LMS 4.0 as an evaluation and I'm only discovering 86 devices, using the auto discovery. I've added a seed and although it sees lots of neighbours on that seed it only goes on to discover devices off a particular range. All the devices are set up the same way (standard config) so it should see them as well.

I know it has a limit on the number of managed devices of 100, and I could understand if it hit 100 and then stopped. We have around 500 devices in total (not including phones, DMPs, etc).

I've just added the seed and selected cdp as discovery method and set the snmp target as *.*.*.*. Is there anything else I should be doing?

View 1 Replies View Related

Cisco :: LMS 4.1 Licensing Required

Jan 5, 2012

I have a customer that purchased an LMS 3.0 package and later upgraded it to LMS 3.2 using same license for 300 devices.Now the customer wants to upgrade to LMS 4.1 and is asking if they can get a similar free upgrade as before, especially since their current LMS is covered under an SP Base contract.

Do you know if the SP Base contract will qualify them for this? I have tried discussing it with a TAC licensing Engineer and the Local Accounts team both have not given me a solid answer.

View 3 Replies View Related

Cisco :: 802.1x ACS 4.1 Authentication Required

Jul 9, 2012

I will attempt to explain the history of our wireless controller configurations as best I can. We are currently using a 4400 controller running 7.x software which authenticates to and ACS 4.1 appliance. All of this was set up prior to my arrival on the job and the previous engineers had already left with no documentation in place so I'm trying to piece it together. The ACS is setup to map to AD for specific groups.

In the controller we have an SSID called triton which is our corporate SSID that all internal users connect to. Three different interfaces have been defined, a general one for most users and two others( lets call them INT1 and INT2) that place users on separate ip networks. The reason for this is those ip networks can reach certain services that are not allowed for general users. ACS maps those users upon authentication to the Vlans associated with those separate ip networks.

Problem 1. When I first took this job, users could not map drives or any services because only user authentication was taking place..After some troubleshooting and realization that ACS was authenticating, placing the "Domain Computers" group as an ACS group mapping fixed that issue, allowing the computers to authenticate prior and therefore execute the login script

Problem 2. Recently it has come to my attention that some of the users on one of the other interfaces (INT1 and INT2) that should be placed in the vlans associated with their AD group mapping are not. Upon further investigation it was discovered that the reason they are not is that the authentication is not correct. When the computer first authenticates before the user logs on its shows in ACS as host/xxxxx.yyyy.org where the user authentication shows as xxxxx/username . So some of the computers never change from authenticating as a host to a user and the ip address ends up in the wrong vlan.

View 2 Replies View Related

Connection Says Additional Login Required

Feb 23, 2013

Okey so the issue here is that my computer just looses its connection after ive downloaded somewhat or something.especially when im downloading from you know what So.when i try to go on my Chrome, explorer, firefox WHATEVER it says Additional logon information may be required.so i click on that annotation and it just brings me to the home page of my main browser google home page with ofcourse no internet what so ever.. im using Wireless and wired (best connection) for the wired i use it through a cisco but neither works.it works fine on laptop and my iPhone 4.

View 1 Replies View Related

Network Not Connecting When Login Is Required

Jun 15, 2011

when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access. I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "page not founded" or "page not available".

View 1 Replies View Related

Cisco :: What Is Required To Filter Sites

Sep 22, 2012

My main goal i want to filter certain sites including facebook not to be accessible within the network and block all torrets including maliciuos site. I was advised to get Cisco ASA 5505 which i already got a quote. But now i want to know if is the ASA 5505 good enough for this purpose, is there anything additional required to succesfully overcome my main goal?

View 5 Replies View Related

WEP Key Required - Kindle Won't Connect To Router?

Jul 24, 2012

My Kindle won't connect to our network. It asks me for a password but our internet password doesn't work.

View 2 Replies View Related

Bandwidth Required For Remote Desktop?

Mar 11, 2011

what will me the minimum requirement to have RDP in vpn?

View 2 Replies View Related

How To Access Belkin Set-up Screen If Required

Mar 8, 2013

I have the Clear Hub Express (Router/Modem combined) and I am trying to connect a separate Belkin Wireless Router (Model F5D8233-4v1) to allow additional "hard wire" connections. Correct settings required for the Clear Hub Express and any additional information that can instruct me on how to access the Belkin set-up screen if required. The standard 192.168.2.1 is not allowoing access to the Belkin Router.

View 1 Replies View Related

Dell :: Wi-Fi Driver Required For N5010 Win 7 32 Bit?

Dec 25, 2012

I have been using dell inspiron 15r n5010 win 7 32bit for over two years.recently I need to reboot my laptop.I have been able to install most of the necessary driver other than wi-fi driver.I tried several time to download wi-fi driver for this model from dell websites but couldn't find the driver of 32 bit for win 7. How to find the wi-fi driver for my system.

View 11 Replies View Related

Cisco VPN :: IPsec On 2951 Required

Jan 10, 2010

setting up IPsec for a DMVPN between a 2811 and 2951s in a test lab. I have enabled IPsec on the hub (2811) but I am unable to do so on either of the 2951s. After researching, it seems that I may have the incorrect IOS for this, but I am at a loss which IOS I should be using. Currently the 2951s are on "c2951-universalk9-mz.SPA.151-2.T2.bin" and the only crypto options.

View 9 Replies View Related

Cisco Firewall :: Pix 515 Configuration Required

Oct 18, 2011

I am very confused on how I setup a Pix 515 that I just got to route traffic out a cable modem. First, let me give you a little details on my current network setup and what I am trying to accomplish with this Pix 515. Currently all my users go out the proxy for any internet access, however I have certain users that need to go out the cable modem instead of the proxy server. Below is an example of the current IP setup of a user A:The cable modem that we currently have has DHCP so I would need the external PIX address to accept a DHCP address. I also don't really understand what else I need to setup so if I have say four users hitting the cable modem through the pix how do I direct their web traffic to the correct computer (NAT ?),I will be plugging the PIX into a cisco switch that all ports are in VLAN 48 so hopefully a static internal address on the pix of 10.24.48.254 will keep me from having to do any routes since all traffic will be originating from the 10.24.48.0 network.

View 1 Replies View Related

Juniper EX4200 - CA / CS Required To Deploy 802.1x?

Sep 26, 2012

Is a CA/CS required to deploy 802.1x? Google searches is confusing me with multiple answers. Im currently trying to test without a CA/CS and im having no luck.

Lab
2008 R2 DC
2008 R2 NPS
Juniper EX4200
User Win 7 PC

This is for a wired connection

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Reports Required

Jul 2, 2012

I have modified my radius accounting reports using "interactive viewer" and saved successfully but the exported report doesn't reflect these changes. I'm just wondering what's the point of being able to modify the reports if you can't export your changes or there is something I'm missing?

View 3 Replies View Related

Cisco :: LMS 3.2 Serial Number Required

Sep 29, 2011

i have LMS 3.2 installed in my campus. i need the serial number of the LMS suite to open a service request with cisco. but unable to find the same. How to find the same.

View 1 Replies View Related

Cisco Firewall :: ASA 5500 Ssl Vpn Required

Jun 14, 2011

I have two ASA 5510 with Security Plus license and Shared SSL VPN licensing enabled.

The problem is that the client get “Session could not be established: session limit of 25 reached” but ther is only 6 ssl vpn user connected with AnyConnect.The software on the firewall’s is 8.2(1)Is there any BUG in this software related to this problem?

View 1 Replies View Related

Webpage Error Details Object Required

Apr 6, 2011

webpage error details object required

View 1 Replies View Related

Unable To Get Network Connection When Login Is Required?

Jun 15, 2011

when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".

View 5 Replies View Related