Firewall Setting For Printer?

Mar 14, 2011

printer sharing problem

View 1 Replies


ADVERTISEMENT

Setting Up Printer To Computer

Nov 11, 2011

I need my network password to set up my printer with my computer

View 1 Replies View Related

Setting Up HP LaserJet 4050 Printer

Apr 22, 2012

I configured the HPLaserJet 4050 in my home for two laptops today.

Hardware involved in Setup:
Dlink Wireless Router for the internet connection at home. Two laptops with internet connectivity over wifi - needing the connection to the printer. One HP laserjet 4050 series printer (to be setup) Problem statement: Wanted to connect the Printer over the LAN cable to the wireless router and the laptops should be configured with the printer settings so as to print over wifi network.

Step-1
Power up the printer. Should warm up with the display showing 'READY' message. Do put A4 papers in the printer tray. Connect a one side of the LAN cable to the printer and the other to the router. In the printer : Click the 'Menu' button on the printer. Navigate till you see 'Information Menu' in display. Click the 'Item' button till you see the 'Print Configuration' in display. Now click 'Select' button. The printer should print two pages of printer configuration with the IP address also mentioned on sheet 1.

Step-2
Now from one of the laptops,ping the IP address from your computer system to ensure the connectivity to the printer within the network. Now follow these steps to add the printer:Go to Control Panel / Printers Click Add Printer Select Local (No automatic detect) Create a new port Select the Standard TCP/IP port Enter in the IP address of the Printer Then add in the drivers when requested for the HP, Laserjet 4050 PS. Now finish. It prompts to print the test page. Go ahead and print one to ensure that the printer in setup. Now repeat the Step-2 for any number of laptops in the home. All should get configured and work fine and should be able to print. No need to test for each and waste paper.

Now you can enjoy printing wireless and schedule multiple jobs and users also without efforts.

View 1 Replies View Related

Setting Up HL-22580DW Wireless Printer With 2 PCS?

Jan 20, 2012

I've A brother HL-22580DW Wireless Printer, and two HP desktops (Both running Win7).

Desktop 1- via cable modem and router (Belkin),
Desktop 2- feeding off the routers broadcast,

I've gone through the documentation and a whole bunch of loops trying to figure out how to set it up. PC 1-There's a wireless setup wizard on the printer itself, that scans for SSIDs. The printer sees the router,and instructs me to push the 'WPC' button on the router, which I do. I head back over to the printer, confirm (ok)it attempts to connect, but it always says " Connection Failed ", prints out an error sheet stating that there is no wireless access point or router with "WPC" enabled.i was informed to "ad hoc" and enable the "WLAN" option on the printer, then denoting its own settings, giving it a name,( for testing purposes no password). This was a success.

PC 2- with the wireless adapter, it "sees" the printer, but when i connect to it the wireless bars are never stabilized ( bars appear, blue circle revolves) and while that occurs, I'm able to print from this computer but i'm forced to disconnect from the routers broadcast, leaving that computer netless, and still the connection never appears to be"stabilized".When messing with computer one,The printer never "sees" the Belkin router though it recognizes the SSID prior. with the second printer, I can print documents but I lose net connectivity switching over to the wireless printers broadcast, and the bars at the bottom right aren't 'stabilized'.I've tried disabling the firewall, on both computers, and within the router itself?

View 1 Replies View Related

WEP Key Required For Setting Up HP Printer D110

Jun 6, 2011

Im setting up a HP printer, D110, they want my WEP security key.

View 2 Replies View Related

Setting Up Existing Printer And Scanner To Work Wireless

Jun 8, 2012

I need to set up existing printer & Scanned to work wire lees with wireless router that is installed in my home.

View 1 Replies View Related

Canon I9900 Printer / Setting Laptop To Print Through Router?

Jan 21, 2013

I have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?

View 2 Replies View Related

Cisco Firewall :: Setting Up ASA 5505 To Be Used As Firewall Between BT Internet And 3560 LAN Switch?

Aug 23, 2011

setting up an ASA 5505 to be used as a firewall between a BT internet router(BTNet service) and a Cisco 3560 Lan switch. BT have presented me with a cisco 3800 series router with the following details:

Network Address   Network Mask  BTnet NTE Router LAN Address
      
There are 2 Gigethernet ports on the back of the router port Ge0/0 is connected to the BT NTE and the status light is flashing green. Int ge0/1 is connected into port int e0/1 of the ASA but i am unable to get any connection.

View 21 Replies View Related

Cisco Firewall :: 5505 - Setting Transparent Firewall Ip Address?

Dec 22, 2011

Trying to set up a asa 5505 in transparent firewall mode. I cannot set the management ip address:
 
ciscoasa> enable
Password:
ciscoasa# config term

[Code].....

View 7 Replies View Related

Cisco Firewall :: ASA 5520 - NTP Server For Firewall Clock Setting

May 22, 2013

I have ASA 5520 installed. I want to use ntp server for firewall clock setting. I found one open-access ntp server (stratum 2) in Los Angeles:
 
[URL] 209.151.225.100
  
Can I use the following command to set ntp server?
 
ntp server 209.151.225.100 source outside.

View 3 Replies View Related

Cisco Firewall :: 891 Setting Up Same Basic Firewall Attributes

Nov 29, 2011

In comparing the 891 (IOS 15.1) firewalling/security features to that of the small business routers, how does one go about setting up the same basic firewall attributes?  with the small business line, you have simple "enable/disable: SPI, DOS, Block WAN request, etc..."how do you go about enabling those same simple things in this router, in particular the "Block WAN request"?

View 3 Replies View Related

Cisco Firewall :: ACS 4.1 And Firewall AAA Setting?

Oct 25, 2012

I have a cisco ASA5520 and i have configured the following to authentication from tacas server.
 
Code...

so whenever i login to any device it give me username and password option
 
i am able to login with my windows database name and password
 
after login while login i have setup a enable password xyz@123
 
so after login with enable password it is coming in privilege level 15 ..
 
Now i want to add some user with only monitor privilege level 3.

View 1 Replies View Related

Printing From Firewall DMZ To Internal LAN IP Printer?

Jun 29, 2012

I am trying to protect the computing assets on a perimeter firewalled / protected LAN from visiting laptops while still permitting the laptops wifi internet access and printing priviledges on the LAN's networked HP printer To do that I was thinking of setting up a computer as a dedicated firewall with 3 NICs (external internet, internal LAN and a DMZ for a Guest wifi router for use by the visiting laptops). (Will probably use free Untangle Firewall software software or such on the dedicated firewall computer).What I can't figure out is the firewall's topology, IP ranges and rules / forwarding that would permit such laptop operation.I would think it would be a common need for small offices but can't find much material on the subject.I do understand that such would slightly weaken the firewall but feel that I would gain more security overall.

View 2 Replies View Related

Cisco Firewall :: Setting Up DMZ On ASA 5505?

Nov 14, 2011

I am trying to set up a DMZ on my Cisco ASA 5505, so that the wireless clients are connected behind the DMZ, the LAN clients are connected behind the inside interface and both groups of clients can get to the Internet.  I have been able to configure the ASA for both wireless and LAN, but the wireless clients still cannot get to the Internet.  The LAN clients can get to the Internet.  I do not want the wireless clients and the LAN clients to be able to be able to communicate with each other. What commands do I need to run in order to allow the wireless clients to access the Internet? 

View 11 Replies View Related

Cisco Firewall :: Setting Up A New ASA5512X / 9.0?

Jan 5, 2013

Having an issue setting up a new ASA5512X, 9.0. Outside interface is a /30 to the ISP. Inside is /30 to a Cat4500 switch. Have a few web servers inside that need to be accessible from outside. Attempting to static NAT the servers to public addresses in a /28 pool but keep getting denied by firewall seeing traffic as a spoof attack. Have tried addressing a sub-interface on the outside with a pool address, also the inside.

View 8 Replies View Related

Two LANs Sharing One Printer But Firewall Blocks

Sep 6, 2012

I have two complete networks in my office. I want to access my printer from both the networks. Condition: With the Firewall I can't access computer of one network from another how can I access the printer from both the LANs. I am not allowed to play with Firewall.

View 1 Replies View Related

Setting Up A Dedicated Firewall Machine On A Switch?

Jan 29, 2012

this company uses Vyatta firewalls, which are dedicated boxes. So I was sent home with a Dell PowerConnect 5448 (a 48 port switch) with the project of getting a similar setup going with the computers i have at home. I have the switch set up, everything's on VLAN1, management IP is 192.168.2. 255.255.255.0, Default Gateway is 192.18.2.254, and the switch is properly sharing the my internet connection between three computers. That part was easy. So now, one of them is going to be either reformatted and set up with Vyatta, or I'm going to virtualize it. Either way, I need to route all the traffic through that firewall box before it goes to anything else on the switch so I can have a functional firewall.

View 9 Replies View Related

Cisco Firewall :: ASA5505 - Setting Up For Home DSL Use?

Mar 4, 2012

I have a cisco asa 5505 firewall, and I have a normal home ADSL broadband router, the router currently connects via wireless to my pc.What I would like to do is basically connect the asa to my pc, then my router to my firewall.what the best thing to do here, run the aa in transparent mode, OR routed mode and do NAT on the firewall to the private ip address range of my router. 
OR, would it be possible to get the outside interface of my asa to get DHCP from my broadband router so it will use a 192.168.1.x address on the outside, and then turn NAT off?

View 2 Replies View Related

Cisco Firewall :: VPN Setting Keep Dropping On ASA 5510?

Jan 23, 2012

I have a Cisco ASA 5510 firewall, my problem is that when the first VPN connections is established everything is good.  But when that connections is cancel or terminated due to non connectivity.  No one can connect to that firewall through that VPN unless that firewall is restarted.

View 1 Replies View Related

Cisco Firewall :: Setting Up ASA 5510 Cannot Get SMTP To Come In

Mar 21, 2013

I have a ASA 5510 (ver 8.4) and I have been all over the support sites looking for what I am doing wrong. I have a sanitized cut n paste of the OBJECT, NAT, ACCESS-LIST and Packet Tracer output and it keeps failing on the NAT with a rpf-check. Once i get the SMTP flowing I have to open up HTTP and HTTPS to one of the servers also.
 
Here it is:
  
RVGW# sh run object
object network WiFi
subnet 172.17.100.0 255.255.255.0

[Code]......

View 1 Replies View Related

Cisco Firewall :: Setting Up Port Forwarding ASA 5505

Mar 15, 2012

We are trying to setup our ASA 5505 to do port forwarding to multiple internal servers and have run into some issues. A little background on what we are trying to do.
 
We have 1 static external IP. Internally we have one exsisting server (10.1.1.184) that has port 80 forwarded to it and another exsisting server (10.1.1.185) that has port 443 forwarded to it. Both of these servers are serving seperate web apps to our employees who of course use them offsite. We have now added an additional server (10.1.1.186) that needs to use both ports 80 and 443. Is there any way to set it up so that these ports can be forwarded to all the servers that need them? Also, how would this work as far knowing what traffic will need to go to which server even though it is using the same port?
 
The equipment is: ASA 5505ASA Version 7.2(4)ASDM Version 5.2(4)   I appologize in advance if what I'm trying to do is difficult/impossible. I inherted the ASA 5505 at this location and I was not here when it was initially installed. In fact no one on staff was here when it was initially installed. I did manage to find the passwords to it though. I'm not at all familiar with the ASA 5505 or Cisco secuirty appliances in general.

View 19 Replies View Related

Cisco Firewall :: ASA 5505 - Setting Up 2 LAN Networks And 2 WAN Connections?

May 16, 2013

I have an ASA 5505 with Security Bundle license.
 
I am able to create 2 LAN networks (192.168.9.0 and 172.16.9.0) Vlan1 and Vlan12 respectively. I also setup 2 outside interfaces (outside1 and outside2).
 
Network 1 (192.168.9.0 - VLAN1) has no issues going out via Outside1, however I can't get Network 2 (172.16.9.0 - VLAN 12) to go thru outside2.
 
I put in a static route (route outside 172.16.9.0 255.255.255.0 x.x.x.x), the x.x.x.x is the default gateway of my ISP.                  

View 7 Replies View Related

Cisco Firewall :: Setting Up New ASA 5505 Into Existing Network?

Mar 21, 2013

I am having a problem trying to figure out how to add a new ASA 5505 to an existing network.  My current network is:Cable Modem  >  Linksys  >  48 port switch With multiple hosts residing on the 192.168.0.x network.Now i know that the ASA comes default with 192.168.1.1 on the inside interface and i want to change that to 192.168.0.1.  I have tried to do this thru ASDM using the wizard and manually.  Once i hit ok for it to write the config, it gives me an error that it didnt take.  I then lose connection to the ASA and have to hard boot it to get it back.I am trying to do this without my external connection connected and i have a laptop connected to the ASA on port 0/2 with an IP address of 192.168.1.75.Do i need to connect my internet connection to it first and then run the wizard?  I was hoping to get it configured for my existing network before i plugged in the internet connection to limit my downtime.This ASA came with 6.4.1 ASDM and 8.2 OS installed.  i was able to upgrade the ASDM to 7.X but when i go to update the OS to 9.1, i get an error that i am not registered to use cryptographic software.   Dont know where i need to register to get it?

View 4 Replies View Related

Cisco Firewall :: Setting A Boot Image On ASA 5505?

May 1, 2011

I have an ASA 5505 that I was updating from frimware 8.04 to 8.41. Anyway, I went through the update procedure half-asleep and accidentally deleted the boot image right after I installed it (I used the CLI and put in the command del asa8*.bin then just hit enter a bunch of times, which of course means I deleted the old firmware too).
 
So now whenever I power up the ASA, I get the "Could not find boot file" error. Is there a guide somewhere that tells me how can upload another boot image to the ASA and set the ASA to boot it from teh ROMMON prompt?

View 1 Replies View Related

Cisco Firewall :: Setting Up Failover Mode On To ASA 5510s

Feb 9, 2012

I've been given the task of adding a second ASA 5510 to a live ASA and making sure that the active/standby failover works, do I need a crossover cable?

View 4 Replies View Related

Cisco Firewall :: Policy NAT Setting Doesn't Work On PIX 6.3(3)

Nov 30, 2012

I have a server in a network DMZ (IP 192.168.40.43) need to do discovery of other IP address to update the IPAM tool. It should not be done source NAT so I´m trying to use the configuration below with Policy NAT but isn´t working:
 
nameif ethernet1 inside security100
nameif ethernet5 dmz8 security55
!
ip address inside 10.56.12.93 255.255.252.0

[Code]....

It´s following message appears "% PIX-3-305005: No translation group found for icmp dmz8 srv: 192.168.40.43 dst inside: 10.38.36.50 (type 13, code 0)".

View 10 Replies View Related

Cisco Firewall :: ASA 5510 - Setting Up ACL To Permit Access Only To The Nat Subnet?

Apr 9, 2012

setting up an ACL on my ASA 5510 to permit access only to the Nat subnet from inside to the outside interface. This firewall is setup for the DR solution in the production network. I am applying following acl in the inbound direction on the inside interface.
 
permit ip any "Nat_subnet"
 
After appliying this acl to inside interface I observed that I can ping to the destinations in NAT'ed subnet but unable to ssh to the servers. Following is the summary of my configuration.

!
interface Ethernet0/0
nameif outside
security-level 0
ip address 192.168.135.241 255.255.255.248 standby 192.168.135.242

[code].....

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Setting Up SMTP Port Block?

Mar 5, 2012

how to go about setting up the ASA to block any SMTP traffic outbound except for our Exchange Server. This is in relationship to a SpamBot issue that blacklisted us. I have an ASA 5510 running version 6.2(5) / 8.2(2) with three ports. DMZ, Inside and the Outside interface. Up till today, I only needed to block outside traffic to our internal network which I used the ASDM to configure a rule on the outside interface for an incoming rule. I am assuming I need to create an outgoing rule on the outside interface; however, just to make sure I understand the terminology/traffic flow, I created the rule with my computer as the source (192.168.0.131) with ALL destination and the service as HTTP. My logic, which seems to fail here, is that any traffic from my computer going outbound would be blocked; however I am still able to browse... That said, if I were to change the source as the Exchange server and the Service Type to SMTP, it would not actually block traffic and therefore not solve our problem.  I even gone as far as permitting traffic from my computer, expanding the hit counter and I see no hits.  So I am no doubt doing this wrong. What I do know, is when I first created the rule, a second rule was automatically created (Implicit rule) that deny all sources and blocked all HTTP traffic until I changed it to Permit?

View 2 Replies View Related

Cisco Firewall :: 2801 / Setting Up Static NAT To Internal Server?

Dec 15, 2012

One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443 
 
Here is a copy of my config.
 
IP    172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Ciscso 2801 Router

[code]....

View 5 Replies View Related

Cisco Firewall :: ASA 5510 - Setting Up Active And Standby Firewalls

Oct 14, 2011

I have a 5510 ASA and have been given another an told to make them active and standby.  Basically the active one is working great but the second one has no config on it apart from the default one, but is the same firmware level.  I guess I need a crossover cable, and what happens with the inside and outside interfaces, would they need to go into a vlan on a switch, one inside vlan where the 2 firewalls inside interface go into and another vlan for the outside?  Otherwise if it failsover to the standby ASA the inside and outside interfaces wouldn't work. 

View 4 Replies View Related

Cisco Firewall :: Upgrade ASA 5505 IPBase 8.2.1 To 8.2.5 Broke External Printer

May 16, 2013

I have a printer sitting on an outside interface e0/7 that external vendors were able to print to prior to an ISP IP address change and IOS upgrade.
 
We upgraded our IOS from 8.2.1 to 8.2.5. The printer wasn't changed so the MAC address mapping is still correct on the ISP translation list. The ISP issues DHCP MAC reservations for static IP address assignment. My printer doesn't seem to be getting the DHCP assignment now.           
 
Here is the before and after config. I'm just wondering since this worked prior to changeing the IP and IOS changes if there is another command I need since upgrading from 8.2.1 to 8.2.5. The DHCP IP address is assigned and is working on my e0/0 vlan2 outside interface.
   
Config that worked prior to the IP and IOS change. hostname hrhdomain-name hrh.comenable password passwd multicast-routingnamesname 10.200.200.0 TestNet!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.8 255.255.255.0ospf cost 10ospf network point-to-point non-broadcastospf

[Code]....

View 3 Replies View Related

Cisco Firewall :: Unable To Authenticate With Common Setting With ASA 5510 Running 8.0

Nov 11, 2008

I have allways configured and run LDAP Server Groups authenticating to Active Directory Domain Controllers using LDAP, never an issue, until I hit a Domain Controller running on a Windows Server 2008. I have been unable to authenticate with the common setting with an ASA5510 running 8.0.1.

View 4 Replies View Related

Setting Web / FTP Home Server With Netgear DGN2200 And Zyxel USG100 With Firewall

Jun 15, 2013

I want to public to the internet a web + ftp server, all running in the same machine that now is a performance pc, in the future will be a qnap nas ts-220. I don't need extreme performance so my ISP gives me only 12 Mb down and 0,8 Mb up. I will use the nas as download station, ftp server and a web server when I'll public a personal site.

this is the config:

-modem/router adsl2+ that connects to the internet. ISP gives me dynamic ip! it has 192.168.0.1 ip and I think it cannot be changed.

-a firewall hardware zyxel usg 100 with all active UTM services. it has default ip 192.168.1.1. the netgear in the "attached devices" see the zyxel as 192.168.0.2, the same ip zyxel says to the wan1 port.

-a pc or, in the future, a nas that now has automatically assigned ip 192.168.1.34.

I must use a free or paied service as dyndns or something else. If the solution to retrieve everytime the dynamic ip is to set the ddns only in the router/modem netgear then it can only use dyndns.org or .com or .it with the dns of the associated ddns service. For example: if I set a dyndns.it account in the netgear I must set also the dns provided by dyndns.it because if I set google dns or something else the service cannot work.At the moment I tested only with a filezilla server running on the pc directly connected to the netgear, no zyxel in this test.

The config is:

netgear with ddns service provided by dyndns.it, activated with the username and password, in the wan I setup the dmz as 192.168.0.2, in the adsl settings setup the dyndns.it IPs. in the services of the netgear also provided a custom service with ports from 60000 to 60050 and created two rules one for outbound and one for inbound where I let data pass from the wan to the server in the lan 192.168.0.2.

filezilla running on the pc with windows 7 x64 with lan ip 192.168.0.2 mask 255.255.255.0 as th3 netgear and gateway of course the netgear 192.168.0.1. dns servers same as provided by dyndns.it. filezilla configured with only one anonym user without password for testing, default listening port is 60000, passive mode active with range 60000-60050 and for retrieving IP I set default, no Dyndns.it host cause it will not work.

So configured it works fine!problem is when I connect the zyxel between the netgear and the server.how change the default ip of zyxel? in configuration - ethernet - lan port is correct to set there the default and static ip to 192.168.0.3? there are many options! same as dmz you can set there the static ip and what ip?also when you want to public a server zyxel don't say nothing about port-forwarding. it says only create two address objects one with ip of the netgear and one with the ip of the dmz port then create a rule in the firewall section where you set wan to dmz and destination and origin ip selecting the two address objects previously created then you are ok...no, really no! and the ip of the firewall rules in the netgear? which ip do you must set? 192.168.0.2? or 192.168.0.5 if you set it up in the dmz port of the zyxel? no, it is a conflict so you must set another ip.to set correctly the server to be visible in the internet with the netgear + zyxel usg 100?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved