Wireless Security Key Required?
May 20, 2012I need my security key
View 1 Replies
ADVERTISEMENT
Add Another Laptop To Wireless System - Security Key Required?
Dec 11, 2011I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
View 1 Replies View RelatedNetwork Security Key Required For Connecting Laptop To Wireless Internet?
Feb 9, 2011I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies View RelatedNetwork Security Key Required For Internet Connection?
Feb 16, 2012Just got a new laptop which is requiring Network Security Key to connect with Internet.
View 1 Replies View RelatedComputer Cannot Get Signal - Network Security Key Required?
Nov 14, 2011I have Clear service but there is one area that I cannot get a signal and need the network security key. I have windows 7, where do I find this security key?
View 2 Replies View RelatedCisco Security :: ACS Usage On NAC 3310 Required
Sep 16, 2007do i still need ACS if i have the NAC appliance say 3310.
View 3 Replies View RelatedHome Network :: Connecting Remote Sites - Security Required?
Apr 8, 2011for example, there are 3 sites, A, B and C. A and B are 1.5 km apart and both are separate LAN(mixture of wireless and wired). C is 35 km apart from A and B. I have to connect A, B and C so that they can communicate with each other. Security is required.
View 8 Replies View RelatedLinksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedCisco Wireless :: AIR-LAP1142N - Password Required But None Set?
May 2, 2012We have a problem with AIR-LAP1142N access points.
AIR-LAP1142N-E-K9
Version 12.4(21a)JA
LAP's are not assotiated with controller yet. They get the ip address via dhcp, they are reachable by icmp.When I try to telnet, I get Password required, but none set? Is there any chance to get access to them without using serial port?
Cisco Wireless :: New Firmware Required For WAP4410N
May 11, 2011as the subject .. All those who have the WAP4410N ...want the new firmware 2.0.4.1 and solve the AP problems of stops an repeat. believe in CISCO.
View 28 Replies View RelatedCisco Wireless :: What Is The Required Power By WAP321
Apr 24, 2013What is the required power by WAP321 ? There's no information about IEEE 802.3af class at the datasheet.
View 1 Replies View RelatedDell :: Wireless M5010 Driver Required
Jul 30, 2012where can i dwld the driver for wifi for my dell inspiron m5010, i cant use the wifi n i lost my cd drivers.
View 2 Replies View RelatedCisco Wireless :: Airplay Across 541Ns Required
Jul 19, 2011I know Airplay isn't meant to be done across vlans, but surely it should work with things on the same vlan.The 541N's are clustered and have WDS enabled. The wireless VAP's are on the same VLAN, and intervlan routing works. Airplay works if the iDevice and the Apple TV are connected to the same access point, but not across the network.
View 1 Replies View RelatedCisco Wireless :: AP 1142N-K9 Configuration Required
Feb 9, 2012How can I have access to the cisco "AP#" prompt? When I try to acees the AP through hyperterminal, it gives me the attached messages. The message keeps looping and not letting me access the AP# command prompt to assign an IP address so that I can control it in mode HTTP.
View 2 Replies View RelatedSecurity / Firewalls :: Connecting To A Security-enabled Wireless Network?
Jan 19, 2013I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedSecurity / Firewalls :: Security Tools And Techniques For Wireless LAN?
Apr 20, 2013Some security tools and techniques for wireless LAN??
View 1 Replies View RelatedLinksys Wireless Router :: New Firmware For WRT16N Required?
Jun 17, 2012I am attempting to install an HP Photosmart 7515 eAll-in-One Printer. Works OK in the USB "tethered" mode, as a one-computer printer only. It will not install as a wi-fi device, probable reason being the settings on my (wireless) router, according to the printer's Wireless Network Test Results sheet. I suspect that the firmware on it (3.0.02) is obsolete. What is the latest firmware version for the WRT160N ?
View 5 Replies View RelatedCisco WAN :: 881w Wireless Firmware Upgrade Required
Oct 15, 2012I recently purchased a new Cisco 881w router (last Friday).I have configured the 'wired' part of the router with little trouble, but the wireless side is proving a little challenging.I have read a number of posts complaining about the firmware version installed on my device being very buggy.The version of the firmware on the wired part is: Version 15.0(1)M8, however, the firmware on the wireless side seems to be: Version 12.4(21a)JA1 - the version reported as buggy. The former has a version date of 2012, with the latter being 2009.I have tried to download a newer version, but the site is asking me to provide a support contract.I wouldn't mind buying a support contract if the thing worked in the first place and I was trying to add some feature after it had been working for a while.
View 1 Replies View RelatedCisco Wireless :: AIR-ACCRMK1300 Mounting Manual Required
Jul 30, 2012I need some manual about how to use AIR-ACCRMK1300=.Is there any offical manual?
View 4 Replies View RelatedCisco Wireless :: 1941W Basic Configuration Required
Apr 22, 2012I am replacing a cisco linksys router with a 1941w.
I have the 0/0 accepting a DHCP from the ISP then I have 0/1 going to a switch and hosting a dhcp server.
Where I have an issue is:
A) Finding a way to turn on the wireless and make it use the same DHCP as wired and setting up a user name/wep password
B) Turning on the GUI that is supposed to be embedded on this.
C) Finding a way to make the DNS point to the default gateway so that I don't have to set the address everytime we move the box.
Here is my current configuration, and with it I can get onto the wired network and get to the internet.
Current configuration : 4712 bytes
!
! No configuration change since last restart
version 15.1
[Code]...
Windows 8 Drivers Required For Belkin G Desktop Wireless Card
Jan 1, 2013I recently updated to Windows 8, and before updating, Windows 8 setup recognized the drivers for my Belkin G Desktop wireless card. After installation, my system was able to connect to my wi-fi network without any problem. However, due to the power going off at my home, an automatic update on Windows 8 got interrupted.
Since then, it has caused a ton of problems, which caused me to finally re-install Windows 8. Now, however, it does not recognize the wireless card and its drivers, and does not let me install from the CD, or through any alternate sources ?
Linksys Wireless Router :: E1000 - Username / Password Required?
Jul 18, 2011A username and password are being requested by http://192.168.1.1. The site says: "E1000"
View 1 Replies View RelatedLinksys Wireless Adapters :: What Steps Are Required To Install WUSB11
Sep 11, 2011What steps are required to install my WUSB11 ver 2.6 wireless adapter on my new Windows 7 machine?
View 1 Replies View RelatedCisco Wireless :: WLC5508 Required For Outdoor Mesh Configuration?
Jan 3, 2012I want to start implementing a small outdoor mesh network of 3 APs Aironet 1550 in order to grow afterward with more APs. Is there any way to configure those 3 APs in an outdoor mesh configuration (for example, only one RAP and two MAPs) without a Wireless LAN Controller or I have to have at least, one WLC? My idea is to have a WLC 5508, but at the very beginning I don't know if my budget is gonna allow me to cost the WLC.
View 7 Replies View RelatedAAA/Identity/Nac :: ACS 5.3 Multiple Service Selection Required For RADIUS Wireless
Feb 26, 2013I use ACS 5.3.0.40.8 with TACACS+ servicing Device AAA and RADIUS servicing the Cisco Wireless environment for AD user access. How can I implement 802.1x with the current RADIUS implementation with hindering current wireless users or am I hindered due to the EAP-GTC in use with PEAP via RADIUS?
View 3 Replies View RelatedCisco Wireless :: 6504-E VSS And WLC 5508 Integration Configuration Required
Dec 14, 2012We have implemented VSS on Cisco 6504-E switches using the 10GE links on the Sup-720-10GE. Two Cisco WLC 5508 controllers are planned to be connected in a LAG configuration, (consisting of eight links per LAG bundle) to each of the 6504-E chassis( Total of four WLC, two for primary and two for secondary). WLC HA feature may be implemented on the primary and secondary WLC controllers using the 7.3 latest code release.
View 9 Replies View RelatedCisco Wireless :: 5508 Mobility Service Engineer / WCS Required Or Not?
Feb 4, 2013I have Cisco Wireless Lan Controller 5508 with 35 (3600 Series Access Points. Do i need to purchase Mobility Service Engine for this or no need? Do i need WCS server for this or no need?
View 1 Replies View RelatedCisco Wireless :: WLC 4402 - Boot Software Required For Upgradation
Jan 15, 2013we have Scheduled an Upgrade for 2 of our WLC Controllers 4402 From Software Version 6.0.182.0 to 7.0.235.3 Version.
I Have gone through the Cisco Docs for the upgrade procedure, I have an Doubt, When i Downloaded the WLC software 7.0.235.3 , I found another software (Cisco Unified Wireless Network Controller Boot software )
I have Previously Done upgradation from 6.0.182.0 to 7.0.220.0 , but i have not yet remebered uploading the boot Software for upgradation.Boot software also Required for upgrading the Wireless controller ?? Whats need of this software?? OR only Main software is enough for upgradation?
Cisco :: One UserID / Device Login Required On Wireless 5508
Jun 4, 2013I am deploying Cisco 5508 with Cisco 1602 Access Points at one of my client's office. User authentication will be done through Microsoft IAS Server working as RADIUS Server. There is a requirement from my client is that the user over wireless can only be able to login to One device using its user ID. I want to inquire if this can be done through WLC or it can be restricted on the RADIUS server? Looking forward for comments.
View 4 Replies View RelatedLinksys Wireless Router :: Firmware Upgrade WRT54G Required
May 16, 2012I'm currently trying to upgrade my linksys WRT54G v1.1 router using the WRT54G-EU_fw,0 file, however when I press upgrade it comes up with a message saying "Incorrect Image File!". The current firmware version is v1.42.2 Is there any way to fix this so I can upgrade it?
View 4 Replies View RelatedWireless :: Username / Password Required For External Hard Drive Access
Aug 26, 2012I am looking to get access to an external hard drive that I have set up on my wireless network.When I try to do an automated Windows backup (off my Vista based laptop files) on to an external hard drive which is connected to my wireless network (through a Belkin router) I am being asked for a user name and password to access the connected hard drive on the network. The thing is that I don't remember setting up a username and password for the hard drive at all. I can paste single files mannually onto the external hard drive without being asked for a username and password. I did perform an automated Windows backup off my other Windows 7 laptop and was not ask for a username and password. where to find the username and password information ?
View 3 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR3600 - NAT Loopback Confirmation Required?
Mar 7, 2013Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : not clear
Firmware Version :
ISP : BT
I am thinking of buying a TL-WDR3600, but just need to know the answer to the question below.Can anyone confirm if the TL-WDR3600 supports NAT Loopback functionality?
Linksys Wireless Router :: X2000 Doesn't Need A User Name / Only A Password Required
Nov 27, 2011Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?