Cisco :: One UserID / Device Login Required On Wireless 5508
Jun 4, 2013
I am deploying Cisco 5508 with Cisco 1602 Access Points at one of my client's office. User authentication will be done through Microsoft IAS Server working as RADIUS Server. There is a requirement from my client is that the user over wireless can only be able to login to One device using its user ID. I want to inquire if this can be done through WLC or it can be restricted on the RADIUS server? Looking forward for comments.
is it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
Okey so the issue here is that my computer just looses its connection after ive downloaded somewhat or something.especially when im downloading from you know what So.when i try to go on my Chrome, explorer, firefox WHATEVER it says Additional logon information may be required.so i click on that annotation and it just brings me to the home page of my main browser google home page with ofcourse no internet what so ever.. im using Wireless and wired (best connection) for the wired i use it through a cisco but neither works.it works fine on laptop and my iPhone 4.
when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access. I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "page not founded" or "page not available".
We have implemented VSS on Cisco 6504-E switches using the 10GE links on the Sup-720-10GE. Two Cisco WLC 5508 controllers are planned to be connected in a LAG configuration, (consisting of eight links per LAG bundle) to each of the 6504-E chassis( Total of four WLC, two for primary and two for secondary). WLC HA feature may be implemented on the primary and secondary WLC controllers using the 7.3 latest code release.
I have Cisco Wireless Lan Controller 5508 with 35 (3600 Series Access Points. Do i need to purchase Mobility Service Engine for this or no need? Do i need WCS server for this or no need?
when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".
User is connecting to 5508, running 7.0.116.0. Previously worked on another AP. TV (client) is set to use dhcp. As other posts have mentioned, "DHCP Addr. Assignment" checkbox is not checked for this wlan, but I also switched it to Required for this wlan but it did not make any difference. Seems to be a problem with just this client as many other clients are on this AP with no problems.
Users have to register their MAC to get on our wireless system, but there is no encyption or security enabled once the device has been registered.
I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43. However, the access points are connected in just fine. Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly?
Does WLC 5508 has capability to create login credentials with specific time of validity? Could it be used in hotel set-up to provide prepaid access account to guest?
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Plug and Play ID.When I test it says the adapter is working properly. I don't know if this matters but I am unable to get microsoft updates. I have 16 that continue trying to update but my computer will not allow.
I had installed the aheros AR5B97 wireless network adapter in wondows 7, but it was not properly installed and the wireless service icon is not displayed in the network profiles.when i checked it in the device manager it showed a device status that:Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
This is regarding CISCO logging configuration.We palnned to implement enable logging on all the cisco nexus switchs.we are running HP arc sight in our DC this device monitor all the CISCO devices.We want to enable logging with this Arc sight device.Just I would like to know about config commands for Nexus device, what is the command to enable logs which is include "who is login & logout?, interface down information?,who was did conf t ? & every logs"
i have a SG300-28 switch here but I do not have the password to login the device. From the startup config of the switch, I see the login password is encrypted. Are there anyway for me to access the device without reset it?
how to track user logins with this device? I've pointed it to a SYSLOG, but it only creates Virtual Access connections, and I don't know who that connection belongs to.
I am configuring my 5508 WLCs with SW version 7.0.116.0. I configured a guest ssid with web-authentication enabled, but I cannot retrieve the login page on the controller. I configured the virtual interface with the addredd 1.1.1.1 SSID Layer 2 security: None SSID Layer 3 security: Web Policy enabled
I join the ssid with clients, receive the IP address correctly however when I try to open a web page, the login page does not appear. When I check the client status I see that it stuck in WEBAUTH_REQD state.
We`re using a WLC 5508 with SW 7.2.103.0.The most things are working fine, but i have a problem with the web auth.
Setup:
- Max Concurrent Logins for a user name is set to 1 - Max-Login Ignore Identity Response is set to enable - Web Authentication Type is set to customized
The Problem:
- the user "test" is logged in at device1 (working), the same user "test" try to login at device 2 (is not working, fine!) -> login is not accepted, WLC redirects to the INTERNAL Web Login Page.The problem is the redirect to the internal web login page after failed login. If i try to login with a not existing user, the redirect is working perfect to the customized web login.
i have a wlc 5508 with code 7.0.220, with multicast enabled in it and on the lan too.I am having a bit of confusion getting bonjour to work on the wireless side. Looking at some of the cisco docs, i still have some questions on how to get it working in my specific enviroment.
I have the wlc conected to the lan via a port-channel. 2 wlan (ssid1 and ssid2) each wlan maps to a specific vlan (dynamic int), the management int (also used for dynamic ap-manager) on a third vlan (vlan x).
I need to get Bonjour working between ssid1 and vlan-x, so my wireless clients (in ssid1 can use bonjour with their laptops) can synch between wireless and wired. I know that you can do this within the same wlan (ssid) but in this case, when a user has a laptop wired into the network he cant comunicate to the wireless device. I read about Vlan Select and Multicast Optimization however, from what i understand i need to setup an interface group and just assign my wlan1 and management int to it, correct?
when or if i need a different segment (vlan y) in my lan to also "bonjour" with ssid1? For this i assume i would need to create a dynamic interface on the wlc using the same IP segment and do the a new interface group?
I'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
I have been asked to allow our employees to connect their own devices to a open wireless network. I want to control access to preauthorized devices and I am looking for solutions. We do to have access to any other control devices like an ACS and I would like to archive the result using just the 5508 controller.
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is referring to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which corresponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
What are the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Run time AAA & prrt-JNI.
I do not want to enable too much debug logs, so what is the specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a problem with AIR-LAP1142N access points.
AIR-LAP1142N-E-K9 Version 12.4(21a)JA
LAP's are not assotiated with controller yet. They get the ip address via dhcp, they are reachable by icmp.When I try to telnet, I get Password required, but none set? Is there any chance to get access to them without using serial port?
I know Airplay isn't meant to be done across vlans, but surely it should work with things on the same vlan.The 541N's are clustered and have WDS enabled. The wireless VAP's are on the same VLAN, and intervlan routing works. Airplay works if the iDevice and the Apple TV are connected to the same access point, but not across the network.
How can I have access to the cisco "AP#" prompt? When I try to acees the AP through hyperterminal, it gives me the attached messages. The message keeps looping and not letting me access the AP# command prompt to assign an IP address so that I can control it in mode HTTP.
I recently purchased a new Cisco 881w router (last Friday).I have configured the 'wired' part of the router with little trouble, but the wireless side is proving a little challenging.I have read a number of posts complaining about the firmware version installed on my device being very buggy.The version of the firmware on the wired part is: Version 15.0(1)M8, however, the firmware on the wireless side seems to be: Version 12.4(21a)JA1 - the version reported as buggy. The former has a version date of 2012, with the latter being 2009.I have tried to download a newer version, but the site is asking me to provide a support contract.I wouldn't mind buying a support contract if the thing worked in the first place and I was trying to add some feature after it had been working for a while.
I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
