Configure Two Wireless Routers - BSNL UTstartcom / Netgear WGR614
Jun 13, 2012
I've two routers, one which i got from BSNL when opted for internet connection. Its a Utstartcom Type II wireless modem and the other which i got from a friend is Netgear WGR614 wireless modem/router.Now coming to the real picture. I've the BSNL wireless modem connected and working perfectly on the 3rd floor on one PC, but NOT configured for wireless access and i've another PC on Ground Floor where i need an internet connection. Fortunately, i got a router/modem which is Netgear WGR614. I do not want a wired connection between these two PCs then wanted to try the wireless way?
I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?
Can't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.
i am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?
At my office we have a simple network using a Netgear WGR614 V7 router. 4 XP machines are connected via Ethernet cable and three other people are connected wirelessly (one XP laptop, one Win7 laptop and one Win 7 netbook). It appears that whenever the netbook is on the network, the other two laptops lose connectivity. The wired machines are fine. Power cycling the router and rebooting usually solves the problem.
I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
My primary home wireless is a Linksys WRT54GS Broadband Router. I have an older Netgear WGR614 Wireless Router that I would like to setup as a wireless bridge to use in another room to connect my other electronics to (i.e tv, blu-ray, Wii).
I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.
I need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
I have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.
I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?
Region : India Model : TL-MR3020 Hardware Version : V1 Firmware Version : ISP : BSNL
I'm unable to configure my Data Card (ZTE-AC8700). I tried with manual settings but it keeps on showing the message "connecting" but doesn't connects although my datacard is shown as identified by the device MR-3020. I'm using BSNL EVDO connection and my datacard is ZTE-AC8700. It doesn't uses any APN, only a username and password and dial number "#777" is required to connect. configuring my datacard with MR3020 ???
I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.
Below is what i got from ipconfig /all using a wired connection to my router.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Userschenupan>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : CGPC Primary Dns Suffix . . . . . . . :
I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
I bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
I have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
I am using a netgear wgr614 router and the laptop I'm trying to use won't connect. It shows up as available but 'Windows was unable to connect to NETGEAR' pops up. Futher troubleshooting brings up "Investigate router or access point issues" but turning off the router did not fix the problem.
This is what is on my Desktop:
Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsDebra>ipconfig
I have a Netgear wireless router(WGR614 v9) and im trying to connect a second laptop to it. The laptop is accessing the internet when I have it connected to my modem via Cat 5 Patch cable.When I detach the cable from the laptop and modem, it doesn't connect to the internet. I went through the whole installing with the cd that comes with the router but after I finish I get the same results.
According to System properties:
Microsoft Windows XP (theres a sticker on my laptop for Windows Vista) Home Edition Version 2002 Service Pack 3
Posted below is my computer info from using ipconfig.
I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.
Region : India Model : TL-MR3220 Hardware Version : V2 Firmware Version : 3.15.2 Build 130326 Rel.56282n ISP : BSNL EVDO
I have tested two zte ac 8700 bsnl evdo modems with tp link mr3220.its not working with the tp link mr 3220.it is lited as the compatible modem in the website. I have updated the firmware.
I think it should be possible to create an IPSec tunnel between a Netgear FVS336Gv2 firewall/router and AWS VPC however, I've been unable after several tries. How do I setup a connection for a Amazon VPC?
How is it possible to configure 2 VLANs to communicate with each other on the same switch? I have managed to create 2 VLANS and they both work (and can access the internet), but they can't communicate with each other.VLAN1 has an IP range starting 10.4.160 and VLAN2 has an IP range starting 10.6.192.Is it VLAN routing that I'm looking for?
Region : India Model : TL-MR3220 Hardware Version : V2 Firmware Version : 3.14.2 Build 120822 Rel.57775n ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
