Configure Netgear Router To Samsung Blu-ray Player To Allow Wireless Connection?

Aug 23, 2011

How do i configure my netgear router to my samsung blu-ray player to allow wireless connection?

Wireless :: How To Connect Samsung Blu-ray Player

Jan 10, 2011

after i enter the security key for my router it says it is unable to connect to the network. it also has me manually put in my ip address and it says my gateway ping is incorrect. where do i find this information

View 1 Replies View Related

Samsung BD-E5500 - Adding Blu-ray Player To Wireless Network

Apr 9, 2012

I have practically NO knowledge of networking! So I've been tearing my hair out trying to get this darn thing sorted but to no avail.So, I've bought a Samsung BD-E5500 blu-ray player which has internet capability either through Ethernet or a Samsung wireless adapter. I am not willing to spend an extra £40-£70 on an adapter and obviously don't relish the idea of running a very long cable to my router upstairs. However the general concensus is that it's possible to take a cable out of the Ethernet and into a wireless AP or router, using it as a bridge to the main wireless router. So I have tried this and failed, of course not having a clue as to what I'm really doing. I have a Netgear ME102 access point which the player can't seem to get on the network with at all and also I have tried using a Belkin F5D7632 wireless router. Now, with the Belkin router the player does say that it can access the network, however it says that it cannot access the internet. The wireless router that I have upstairs is an O2 Wireless Box 3.

View 3 Replies View Related

Linksys Wired Router :: BEFSR41 - Samsung BD Player Reports HTTP Port Is Disabled

May 12, 2010

As the subject says, I've hooked up a Samsung BD player to a BEFSR41 router. The router has the current firmware version. When I run the connection test for the player, the local connection is good but the Internet connection fails and the message is " The HTTP port is disabled."

I've searched high and low for a solution to no avail. I did searches on the forum and couldn't find anything. As a test, I connected the BD player directly to the DSL modem and the Internet connection worked perfectly so it appears that the blockage is within the router.

I've serched through the router setup and have changed most settings to try and find something that would work. Nothing worked so I have returned my setup to its original state.

View 7 Replies View Related

D-Link DIR-601 :: Cannot Connect To Samsung Blu-Ray Player

Jun 28, 2011

I have a Samsung BD-C5500 Blu Ray player and am using the Samsung PC Share Manager software. For some reason, the software is not recognizing the player. However, the player is able to connect to the internet (I stream Netflix). I am running Windows XP service pack 3 and both my BD player and PC are connected to the same router (D-Link 601). IP address for BD player is 192.168.0.102 and PC is 192.168.0.100. BD player firmware is up to date.

View 1 Replies View Related

Routers / Switches :: Get Samsung Player To Connect?

Aug 15, 2011

im trying to get netflix but i cant get my blueray player to connect to the internet,everything is hooked up and turned

View 1 Replies View Related

Add Samsung E5500 Blu-ray Player To Access Point Via Ethernet?

Dec 27, 2012

I have set my Linksys WRT120N as an Access Point by connecting it to my primary router via Ethernet. To the Linksys WRT120N I have connected via Ethernet a Samsung BD-E5500 player.Through the Linksys WRT120N Access Point, I am wirelessly able to browse Internet through my cellphone, however, E5500 keeps reporting that while it is connected to the network, it is can not connect to the Internet. The Network Settings is Wired and Auto for IP and DNS.

View 3 Replies View Related

Routers / Switches :: Can't Stream Netflix On Samsung BD D5100 Blu-ray Player

Sep 18, 2012

I got no code, and as a matter of fact have no Internet connectivity to my Bluray player. When I go to my Bluray setting tab and run a network test the MAC Address checks out but fails when it gets to IP Address. My Bluray is plugged directly into my router and it still shows no Internet connection between the two, even though my x-box 360 has no problem nor does my computer. When looking at my network settings the IP Addresss boxes all have numbers in them, the Subnet Mask boxes two of four boxes have numbers the others are zeros, the Gateway boxes are all zeros, and the DNS Server boxes are all zeros. I read many of the posts in this forum and all problems seem pretty similar to mine.

View 4 Replies View Related

Netgear Wireless Router / Samsung Laptop Not Picking Up Wireless Signal?

Aug 27, 2012

I've just bought a new Samsung 3 series laptop (Windows 7 Home Premium 64 bit). I have two braodband lines at my home (1: Sky with standard Sky wireless router. 2: BT with Netgear wireless router). The Netgear router is primarily used for business but I also use it to connect with my old Dell laptop and my iPad. However I cant seem to connect with my new Samsung laptop to the Netgear router. I want to get rid of the Sky broadband line but neet to get the Netgear line working correctly first.If i turn the Netgear router off and then on again the laptop can see the router and picks up the wireless signal and connects for a few minutes before it drops off and then it can find it again. The laptop does similar with the Sky router except that the connection seems to last longer before it drops off and at least it can always see the Sky wireless signal for me to reconnect again.

View 3 Replies View Related

Configure Desktop To Get On Neighbors Internet Connection With Netgear Wireless Adapter?

Nov 13, 2011

How do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.

View 3 Replies View Related

Linksys Wireless Router :: E-1200 Does Device Enable To Get Connection To Blue-Ray Player

Nov 21, 2012

I have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650.

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Watch HULU Through Player It Kills Entire Internet Connection?

Dec 17, 2011

I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.

View 2 Replies View Related

Can't Get Netgear Modem To Connect To Magnavox Blu-ray Player

Sep 10, 2011

I have a Magnavox Blu-Ray player, model MBP5130/F7. I leep getting the DHcP cannot be acquired.

View 4 Replies View Related

Netgear Wgr614 Wireless Router - Configure AP WG102 As Repeater

Aug 5, 2012

I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?

View 3 Replies View Related

Configure Vpn On Samsung Star Next?

Apr 27, 2011

How to configure VPN on Samsung Star Next ?

View 1 Replies View Related

Home Network :: Can't Establish A Wireless Connection To / From Media Player

Apr 19, 2011

Trying to establish a wireless connection from WD TV Live Plus unit to Westell 327W router using an AirLink 150 adapter. The media player sees my network and seems to have a good signal, but keeps telling me "limited or no connectivity." The media player (with adapter) is about 20 feet from the router with direct line-of-sight.Also, 3 other Wi-Fi devices having no problem connecting anywhere in the house.Power down/power up, move adapter to alternate USB port, re-try connection multiple times.

View 4 Replies View Related

Wireless Disconnects / Wired Connection On Samsung Smart TV

Nov 26, 2012

I'm having trying to connect my Samsung Smart TV to the Internet.I purchased the Samsung EH5300 yesterday and have connected it to my router (ZyXEL P-660HW-T1) via Ethernet. This works fine and picks up all the settings (ie: IP address, gateway etc) automatically and I can connect to the Internet fine.The problem comes when I then connect any device to the router using Wi-Fi - this could be my iPad, iPhone, PC, laptop - anything will disconnect the wired TV connection immediately from the Internet but it DOES NOT disconnect it from the network. In other words, I can still see the TV in the list of devices on my router and still ping the IP from my PC. All the settings on the TV remain the same but when running the network test, it says it is connected to the network but not the Internet.I have disconnected all cables, reset the router, turned everything off and on several times, placed the Ethernet cable in different ports on the router, manually input all the IP addresses etc but none of it is working.

View 6 Replies View Related

Using Samsung Galaxy Y S5360 Wifi Connection Without Wireless?

Apr 30, 2012

Use Samsung galaxy y s5360 Wi-Fi connection without wireless video?

View 1 Replies View Related

WGR614 - Can't Get Into Netgear Router To Configure It

Dec 20, 2011

Can't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.

p.s. the router is a Netgear model # WGR614

View 4 Replies View Related

Netgear Wgr614v7 Wireless Router Suddenly Allows Only One Connection?

Aug 15, 2011

I have a Netgear wgr614v7 wireless router that has been working perfectly for a couple weeks now, but I have suddenly run into a problem. For some reason, I can now only connect one laptop at a time to the networkWhen I try to connect, it says, "Windows was unable to connect to [network name]". When I try to connect with my Macbook, it says "network timed out". Before, I was able to connect all three without any problems.

View 4 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N / Samsung SmartTV Refuses To Accept Connection In Client Mode

Dec 6, 2012

Region : Argentina
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :

Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :

Am trying to use a TP-Link TL-WR702N to connect my Samsung SmartTV to a wireless network, using "client mode".For some reason, the TV refuses to accept it is connected, or even connected to a router. Enabling DHCP on the TP-Link does seem to convince the TV that it is connected to a router, but still not to the internet. Strangely though, I can control the TV via the Android app operating on the local network, so clearly it is connected. I assume the SmartTV is trying to get a response on the local network that the TP-Link is filtering out for some reason, but no idea why.

View 14 Replies View Related

Creating Network Bridge Between PC And Blu-ray Player Via LAN Connection?

Mar 10, 2011

I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.

View 10 Replies View Related

Netgear WNR1000 Wireless G Router - Dropping Connection To Computer

Feb 6, 2012

I have a NetGear WNR-1000 wireless G router. I currently only have 1 computer hooked up but I have had 3 computers hooked up to it before. It doesn't matter what internet it's connected to or how it's connected to the modem itself. I have had DSL and Cable hooked up to it and I am currently using it as a secondary router behind my roommates old Wireless B router. He currently has all of his things hooked up via ethernet and wirelessly to his router. So, im download the xirrus wifi inspector thing. It doesn't matter the OS either. I've had XP sp3, vista, and 7 all hooked to it and it's the same all the way around and it doesn't matter the kind of wireless card either!

View 1 Replies View Related

Just Added Netgear Wgr614 Wireless Router And Now No Internet Connection

Feb 26, 2012

I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.

View 1 Replies View Related

Routers / Switches :: Unable To Configure Netgear Router With Clear Modem

May 2, 2011

i am unable to configure my netgear router with my clear modem

View 1 Replies View Related

Sony SMP-N100 / USB Connection Between NAS And Streaming Media Player?

Mar 12, 2012

I have a Sony SMP-N100 streaming media player that I'd like to attach my old Buffalo Gigabit Linkstation (HD-HG400LAN) NAS via the USB ports that are available on each device. They each have USB A female ports, so I need a USB cable with A-male connectors on each end, right?Should it work?

View 1 Replies View Related

Netgear Dg834gb V Router - Wireless Connection Will Drop At Random Moments?

May 21, 2012

Ok so I have a Netgear dg834gb v2 and I have a disconnecting problem on a wireless connection for my laptop. When I am using my laptop, my connection will drop at random moments mostly when I'm playing League of Legends. If I'm not playing it rarely disconnects. It drops for about 10 seconds and comes back up usually, but sometimes I have to reset the router. It only recently started happening and I have no idea why. Maybe it can't handle when I'm playing?

View 14 Replies View Related

Reconnect Blue-ray Player To Wireless Router

Jun 24, 2012

My sony blue ray player lost it's connection to my wireless lnyskis router. I can't reconnect it.

View 3 Replies View Related

Only One Computer With Slow Wireless Connection Netgear CGD24G Wireless Router?

Jan 7, 2011

I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well

View 5 Replies View Related

Linksys Wireless Router :: Netgear WNR1000v2 - No Connection With Wireless

Nov 3, 2011

ip - Comcast.....
tower card - Creatix CTX404 WLAN 802.11b.....
Router - Netgear WNR1000v2 (supplied by Comcast)
Modem - RCA - DCM 325 (Also supplied by Comcast)
Window XP Pro w/SP3
Security - WPA-PSK

I'm getting in no special order
a "validating identity" or "authorization failed" or "unable to find a certificate to log you onto the network" or "limited or no connectivity...etc..."
I have removed the check in front of the enable box in the Authorization Tab. The only difference I have noticed is that the icon in the task bar instead of a white on red X I now get a Black on yellow triangle...but still no connection...all this after a couple of days worth of **bleep**

View 2 Replies View Related

Connection From DLink DIR-655 To Samsung TV

Mar 19, 2011

I am having a terrible time getting a good signal from my DLink-DIR655 router to my Samsung HDTV with a linkstick to have access to the apps like Netflix. My router is located about 60 feet away but the signal is sufficient to connect to my laptop located in the same room as the tv. I have been told the router should be no more than 20 feet from the tv and have tried a DWL-G710 range extender but that doesn't work.

View 1 Replies View Related

Configure Netgear Router Dgn1000 To Route Time Warner Road Runner Ethernet?

Mar 1, 2012

In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?