TP-Link 3G/3.75G Router :: Unable To Configure BSNL-EVDO Data Card (ZTE-AC8700)
Mar 13, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : BSNL
I'm unable to configure my Data Card (ZTE-AC8700). I tried with manual settings but it keeps on showing the message "connecting" but doesn't connects although my datacard is shown as identified by the device MR-3020. I'm using BSNL EVDO connection and my datacard is ZTE-AC8700. It doesn't uses any APN, only a username and password and dial number "#777" is required to connect. configuring my datacard with MR3020 ???
View 2 Replies
ADVERTISEMENT
Feb 13, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
View 2 Replies
View Related
Apr 21, 2013
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : Problem persists on all three firmware
ISP : BSNL india on EVDO
Today i purchased brand new Tp-Link MR-3420 3G/4G router for my BSNL EVDO modem..as this product is shown to support ZTE AC8700 modem...but it doesnt seem to work.. I put the right dial-up number,user name and password that i use when i connect modem to laptop and left APN field blank...The modem gets identified by the router but it just don't connect to internet,it just keeps saying "connecting.....". Also the signal strength is shown 0%... If your modem is really supporting ZTE AC8700 modem why its not working?
View 2 Replies
View Related
Mar 5, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL EVDO
my BSNL evdo ZTE AC8700 modem is not working with TL-MR3220 V2. The modem is being detected in the router and i have set the Dialing number, username, password. [code]
View 5 Replies
View Related
May 7, 2013
Region : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : Airtel
Just bought new 3g data card from Airtel. Modem supplied is ZTE AF190U. Its not recognised by the 3GRouter.
View 1 Replies
View Related
Feb 12, 2012
Huawei Dongle-ce-0682,sold by Airtel,how to use for REL,or BSNL sim card
View 1 Replies
View Related
Jan 20, 2012
how to configure bsnl type II modem on my computer. with open source and security too.
View 4 Replies
View Related
May 4, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.15.2 Build 130326 Rel.56282n
ISP : BSNL EVDO
I have tested two zte ac 8700 bsnl evdo modems with tp link mr3220.its not working with the tp link mr 3220.it is lited as the compatible modem in the website. I have updated the firmware.
View 3 Replies
View Related
Jun 13, 2012
I've two routers, one which i got from BSNL when opted for internet connection. Its a Utstartcom Type II wireless modem and the other which i got from a friend is Netgear WGR614 wireless modem/router.Now coming to the real picture. I've the BSNL wireless modem connected and working perfectly on the 3rd floor on one PC, but NOT configured for wireless access and i've another PC on Ground Floor where i need an internet connection. Fortunately, i got a router/modem which is Netgear WGR614. I do not want a wired connection between these two PCs then wanted to try the wireless way?
View 1 Replies
View Related
Feb 19, 2013
Is it possible to connect wifi router to data card?
View 1 Replies
View Related
Nov 18, 2012
For the past few days I've been attempting to configure a data T1 on a Cisco 1760, but I'm stuck at:
Serial0/0 <our ip address> YES NVRAM up down
To provide a bit of background. This router used to be configured with a T1 via Frame-Relay; which worked fine. Now we recently change offices and providers, and the provider did not offer any information as to which encapsulation type to use, and if Frame-Relay which DLCI to use, etc.
Now I've been trying to setup the T1 connection and testing various settings such as encapsulation HDLC and PPP, but no luck. I also played around with the line codes and framing; which resulted in the following framing sf int down, line prot down, framing esf int up, line prot down. Regardless no luck.
Now I've been following several guides and examples mainly the following: [URL] In this guide they make mention of a WIC-1DSU-T1-V2, but as you can see in the show diag snippet at the bottom; we have a WIC-1DSU-T1 version 1.5. I dont' know if this poses a problem for us.
Throughout the entire process I've seen a few irregularities for example:
1. Router(config-if)#service-module t1 cablelength short 110ft
^
% Invalid input detected at '^' marker.
The IOS doesn't recognize any command with service module t1 ca , and the only recognized command with C is clock.
2. If I enter the following list of commands under the serial interface:
!
interface Serial0/0
ip address 10.0.0.51 255.0.0.0
service-module t1 framing esf
service-module t1 linecode b8zs
service-module t1 timeslots 1-12 speed 64
[code]...
And I do a sh run all I get is the following:
!
interface Serial0/0
ip address 10.0.0.51 255.0.0.0
load-interval 30
!
Although i can do a show service-module s0/0 I can see all of the configured parameters (see below)
Module type is T1/fractional
Hardware revision is 0.128, Software revision is 0.2,
Image checksum is 0x73D70058, Protocol revision is 0.1
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec.
Last module self-test (done at startup): Passed
[code]...
View 19 Replies
View Related
May 24, 2012
I have to configure router 2811 for Data and Voice network.However I have only one Fast Ethernet interface. [code]
what else do I need to configure on switchport on which Avaya phones are connected.And is there any extra command, i need to configure on the router and 2950 switch.
View 4 Replies
View Related
Jan 11, 2011
i am tryin to set up a vpn with a 3g data card. i have got a "virtual ip" supplied by the program i am using (tunngle)i have go tit to as far as using tunngle but as soon as i click "network" in the actual game menu, it disconnects my internet automatically.
View 1 Replies
View Related
Jun 23, 2011
I have one problem regarding a configuration (or setting up) of 3G SIM card for 887G router backup. That SIM card had a PIN code, so I disabled it, and now I can see that 3G light flashes Blue, so it detects 3G network. Also I can see that modem tries to dial up to connect to network, but with no luck. It has CHAP APN. Also in configuration I've found that there is PPP CHAP username and password, but I don't have any of those. I've tried to configure my SIM card with Username and Password, but it doesn't save. At the moment I have: Cellular 0 is down, line protocol is down. Dialer 2 is up (spoofing), line protocol is up (spoofing).
SIM card status is OK. Network detects O2 - IRL - yes.
It detects the network, but cannot connect to it. I'm not sure how to setup the SIM card or how to unlock it.
View 3 Replies
View Related
Dec 31, 2012
How to make compatible data card with all Wi-Fi router
View 1 Replies
View Related
Apr 27, 2012
How to get 100mbps speed in wireless data card
View 1 Replies
View Related
Feb 9, 2013
I want to unlock my data Card Vodafone K-3770Z
View 1 Replies
View Related
Apr 10, 2012
I am having BSNL broadband & netgear router. Some of the sites are not opening like [URL] many more?
View 4 Replies
View Related
May 28, 2012
why datacard isn't connecting of my laptop in guest account?
View 1 Replies
View Related
Mar 12, 2011
I recently bought the Dlink DIR-655 router and I have a Dlink DNS 323 nas. I have them connected and working. When I send data from my PC to the DNS 323, i'm doing about 6MB/s. when I'm sending data from DNS 323 to my PC, i'm doing about 30MB/s. all 3 devices have the 1000 Mbps enabled and Jumbo frames is enabled on the DNS 323 and my PC. is this normal?
View 14 Replies
View Related
Feb 11, 2013
I have a data card with max. speed of 3.1mbps but i get only abt 1/3rd of it so i was thinking to buy a longer data cable as i saw on some site that the speed increases.
View 4 Replies
View Related
Mar 20, 2013
Is there a way to configure a 28xx series router with a HWIC-AP card as a wireless client instead of a wireless access point? There isn't a network drop in the location that I need to place a router, but there is an active Access Point that reaches the area.
View 1 Replies
View Related
Feb 15, 2013
What is the reason to call a router as data link layer device
View 1 Replies
View Related
Feb 25, 2013
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies
View Related
May 15, 2013
I have a Dell Studio PC with a Dell Wireless 1397 WLAN Mini-Card. OS is Windows 7 with SP1. Intel Core 2 Duo T5800 2.00 GHz
In general I have no problems with my WIFI with simple browsing and most of my routine activities online. But any time I stream video (like youtube), music or download a large file, my WIFI spontaneously turns off. I need to either restart the computer or put the computer to sleep/wake it up for the WIFI to work again.
I have the latest drivers for the Wireless card. I scanned the forums and didn't see this problem reported elsewhere. I realize this is an old computer so I may have to install an external wireless adaptor, but I wanted to ask around before doing so.
View 8 Replies
View Related
Aug 23, 2011
how to configure WRT54GC compact Router if the data should be configured to flow from PC1 through Switch to Router and then to PC2 back through Switch in the following configuration?
(PC1) -------------------(SW)--------------------(Router)
HD: 10.14.40.10/16 |
G/W: 10.14.40.1 |
[Code]....
That's, the data flow is PC1 -> SW -> Router -> SW -> PC2. I think that Router has to have both routing of 10.14.40.1 & 10.14.50.1, but how should I configure the router?
View 1 Replies
View Related
Feb 28, 2012
I am using D link Wireless router and the Model is DI-524 I am unable to configure the router with static Ip as the ISp having Static Address.
View 4 Replies
View Related
Apr 6, 2012
i am having trouble in configuring my cisco router 887. my connection type from my ISP is static ip. im not sure if i have entered the correct command in the CLI.
router(config)# interface fa 0/0
router(config-if)# ip address 61.10.XX.XX x.x.x.x
what would be the command to do this?and also, i want my other PCs to receive DHCP ip address from the router.
View 2 Replies
View Related
Feb 5, 2013
We want to use a Cisco 861 Ethernet router to link our LAN's data and voice segments together (each on separate switches). Our switches are not Layer3 so routing over them is not an option. We only use the default VLAN1 on both switches.There is a data segment 192.168.1.0/24 and a voice segment 192.168.150.0/24, each with it's own internet/WAN access (internet for the data lan and SIP provider for the voice lan).
Diagram:
internet-~--router_192.168.1.1------192.168.1.0/24_data_lan--------192.168.1.254_cisco861_192.168.150.254-----192.168.150.0/24_voice------192.168.150.1_router--~-sip_provider
This is want i want to achieve:
- Link the data and voice switches using the 861
- I want to make the Cisco 861 the default gw on both segments, but they should only route traffic destined for the other segment to each other and route all other traffic to their segment's designated internet connection. I don't want the Cisco to do any NATting and there's no need for firewalling either.
View 3 Replies
View Related
Feb 4, 2013
I have inherited an asa 5510 whit 4GE SSM module installed. The asa runs fine, but i can not use the 4GE SSM ports. Using ASDM or console i can get and configure the gigabitethernet1/x ports but i can not get traffic on it. The ping from the console to the ip address of the Gigabitethernet1/0 is successful. On switches or hubs connected to those ports i can not see the port's mac address. The two Internal-data0/0 and Internal-data1/0 are down and i can get they up. How to configure 4GE SSM or ASA internal-data ports.
View 8 Replies
View Related
Feb 15, 2012
I am having problem setting up SGE2000P switches to work with my default data VLAN and additional voice VLAN. I am configuring it to pick IP address for phones from voice VLAN which is working fine but when I connect a PC on phone port it is also picking up an IP from Voice VLAN while default VLAN is data with different scope of IP.
I pack these switches and purchase ESW 500 series. I have ESW 500 at another client and they are working fine out of the box but this guy is giving me hard time.
View 1 Replies
View Related
Dec 8, 2011
I have installed a DIR615 N Router and can get onto the Internet on the PC, but when I type in the device IP address it comes up with an "error" message so I cannot configure it.
View 6 Replies
View Related
Mar 8, 2011
I have a (Air Access) - ZG-5000-11g Wireless Outdoor Bridge , Ap Router, It has hanging problem, so I make it factory default. but now I have unable to configure it. find out default ip address.
View 5 Replies
View Related
