i am tryin to set up a vpn with a 3g data card. i have got a "virtual ip" supplied by the program i am using (tunngle)i have go tit to as far as using tunngle but as soon as i click "network" in the actual game menu, it disconnects my internet automatically.
View 1 Replies
Is it possible to connect wifi router to data card?
View 1 Replies View RelatedHow to make compatible data card with all Wi-Fi router
View 1 Replies View RelatedHow to get 100mbps speed in wireless data card
View 1 Replies View RelatedI want to unlock my data Card Vodafone K-3770Z
View 1 Replies View Relatedwhy datacard isn't connecting of my laptop in guest account?
View 1 Replies View RelatedI have a data card with max. speed of 3.1mbps but i get only abt 1/3rd of it so i was thinking to buy a longer data cable as i saw on some site that the speed increases.
View 4 Replies View RelatedRegion : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : Airtel
Just bought new 3g data card from Airtel. Modem supplied is ZTE AF190U. Its not recognised by the 3GRouter.
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies View RelatedRegion : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : BSNL
I'm unable to configure my Data Card (ZTE-AC8700). I tried with manual settings but it keeps on showing the message "connecting" but doesn't connects although my datacard is shown as identified by the device MR-3020. I'm using BSNL EVDO connection and my datacard is ZTE-AC8700. It doesn't uses any APN, only a username and password and dial number "#777" is required to connect. configuring my datacard with MR3020 ???
What are the list require for setting up Data Center for either University or Government?
View 4 Replies View RelatedI have a Dell Studio PC with a Dell Wireless 1397 WLAN Mini-Card. OS is Windows 7 with SP1. Intel Core 2 Duo T5800 2.00 GHz
In general I have no problems with my WIFI with simple browsing and most of my routine activities online. But any time I stream video (like youtube), music or download a large file, my WIFI spontaneously turns off. I need to either restart the computer or put the computer to sleep/wake it up for the WIFI to work again.
I have the latest drivers for the Wireless card. I scanned the forums and didn't see this problem reported elsewhere. I realize this is an old computer so I may have to install an external wireless adaptor, but I wanted to ask around before doing so.
I have a Verizon MiFi card and 3 wireless laptops that pick it up automatically.....I can't seem to get it set up on the desktop pc.....it doesn't recognize it
View 1 Replies View Relatedi bought Tata photon plus data card around 5 months back. But now i moved from tata photon plus to reliance net connect coz of its poor service . My friends tell me that i can use my old data card as pen drive. what i should do to use my data card as pen drive.
View 3 Replies View RelatedI think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedJust recently installed CW LMS 4.1. In the Configuration Dashboard you can see Discrepancies and Best Prctice Deviation. In our old 4.0 it shows a list of both discrancies and bestpracice deviation. In our new 4.1 we only see "No data is available", so I guess I need to do som work but can figure out where and what.
View 3 Replies View RelatedI transfered both shares to the NAS last weekend, and plan on configuring the shares to be hosted on the NAS this weekend. In order to do this, I need to copy all of the changed files to the NAS in the most efficient way possible. I was thinking of using either xcopy or robocopy. What do you think? Is there a command in either one that would allow me to copy only changed data? I don't want to wait another 18 hours worth of copying to move all the information over AGAIN
View 1 Replies View RelatedI have several network shares in my home using two different NAS devices.I am looking for recommendations for backing up the data on these devices.I currently use CrashPlan for backing up my computers.I have 1 share (documents) that I would like to somehow get backed up to CrashPlan (I'm not specifically tied to CrashPlan, it's just what I'm using now). The rest of the shares I would like to just backup locally in the event of hard drive failure.I have tried having my iMac mount the documents share automatically and include that in the CrashPlan backup, but it seems unreliable.
View 6 Replies View RelatedI have a DSL wireless router in my house, I would also like to have wireless in my workshop. It's over 130 feet to the shop so my house router won't reach. when I built my shop I put an extra pipe in to pull phone line in but now I'm wondering if i can just pull in a cat 5 and get both data & phone.
View 2 Replies View RelatedHow can I prevent them from seeing the data i receive & send i was told vpn was a route to take but after some searching i found a lot of threads saying different is vpn a best way to go about blocking my isp from seeing data received & sent
View 1 Replies View RelatedI would like to conect a USB device to a computer using WiFi instead of the USB cable the device has. The thing is that I'm not sure about the drivers. Is there any USB Wireless device that transmits the USB data "raw" and the receiver plugged to the computer gets the data with the driver of the remote device in the own PC?
View 1 Replies View RelatedCan i extract data from this website?
View 3 Replies View RelatedI have a new Palm Vx and have installed Version 3 Palm Software followed by an upgrade to 4.0.1.This works fine with the new Palm but I can't transfer all the data from my old Palm (almost 12 years of stuff) to my new Palm.
View 1 Replies View RelatedMy computers are currently networked. I can share data and internet. I have a D-Link DAP-1522. How do I disable the internet from other devices? I can connect my main computer directly to the Comcast modem for access. But I don't want systems connected to the the access point - via LAN or wireless - to access the internet. i want employees to work and i also want to avoid the internet myself when not working at the main desk.
View 14 Replies View RelatedAre there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
View 1 Replies View RelatedI am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
I need to migrate DFM alarm settings data from LMS 3.1 to LMS 4.2.3 and I want to use this method, [URL] , to extract the data from 3.1 and then inport it into 4.2.3.
I successfully performed it for IP settings, it was easy since the data format was the same.
But the format differs quite alot for Interface and Port data, here is an example:
export from LMS 3.1
IF-hostname/17 [Gi0/0.524] [10.55.254.3]; INTERFACE:;IF-hostname/17; MANAGED_STATE:;EXPLICITLY_UNMANAGED
export from LMS 4.2.3
INTERFACE:IF-hostname/17 MANAGED_STATE:MANAGED GigabitEthernet0/0.524
It looks like I have convert interface names, sort and delete stuff to make it look the same.
Having a terrible time finding a single, dual or quad recessed 1 gang data receptacles! All I can find is 2 gang Electrical and Data combo's from Levinton like the one below. I already have Leviton's 1 gang duplex recessed electrical in the wall, and the cat6 keystones terminated in an MPLS wall box, so replacing both of these drops with the 2 gang outlet below would be a nightmare and I don't want to do it.
View 6 Replies View RelatedI have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies View RelatedWe know that every node in the network uses its routing table to forward the packets towards their destination. I have a doubt that which data structure used to implement these routing protocols.
View 6 Replies View RelatedI'm looking for an online-service, where I can share files. Something like a forum, but not to text, but to share files (mostly MS office files). Main criteria are:
1) Access only by an account created by the admin (--> limited amount of members)
2) possibility of moderation through admin (meaning that I can determine, who can access which folders, who can upload/change/delete files).Something like OLAT, moodle, or blackboard, for those who know, only smaller.Would I need to create something new or is there some service already existent, where I could rent space?
Which data structure used to preparation of a routing table.
View 6 Replies View RelatedAny Router that is capable of logging the amount of data down/up loaded from/to each connected device with amount of data and date and time stamp.
View 1 Replies View Related
