Router With Data Logging Ability?

Mar 11, 2013

Any Router that is capable of logging the amount of data down/up loaded from/to each connected device with amount of data and date and time stamp.

View 1 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5520 - ASDM Logging - Disable Rules Logging

Nov 16, 2011

I'm encountering what I think is an issue on logging system on FW ASA 5520 - Asa Version 8.4(2), ASDM version 6.4(5). When I disabled the logging inside a rule from ASDM, or from console with the "log disable" option inside ACL, If I check in ASDM logging real time window I continue to see all the entry related to disabled rules. This is a correct behaviour about ASA logging ? How I can "hide" the entry related to disabled rules (this is what I need for troubleshooting purposes) ?

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Will Loose Ability To Connect To Router

Nov 19, 2012

If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ?  If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?

View 3 Replies View Related

Cisco :: ADSL2+ Router With Ability To Hardcode Port Speed / Duplex?

May 3, 2012

I have a video conferencing device and I struggled a lot with a bunch of different routers. I was giving up but then I plugged in a friend's old Linksys/Cisco Adsl gateway and all the problems disappeared (kudos to Cisco). The problem is that the gateway is not ADSL2+. I have since borrowed a Linksys/Cisco ADSL2+ router, however, there isn't a possibility to enter port speeds/duplex manually (required to prevent packet loss in video conferencing, I really want to have that option for the peace of mind). I have been looking around on the internet but I can't seem to find this ability any routers' specs. What I need is as follows:

- Has to be Cisco or Linksys router
- Has to be ADSL2+ (Annex A)
- Doesn't have to be wireless, even single port is OK
- Preferably has DMZ
- Ability to hard code lan port speed/duplex (i.e. no autosense)
- No other functions needed so hopefully a cheap option

View 17 Replies View Related

Linksys Wireless Router :: RJ45 Loose Ability To Connect To Sites Via Browser

Jan 24, 2012

Not too much networking savvy - but here goes. Want to use router as local lan - no wireless. When router is connected to laptop via RJ45 I loose my ability to connect to sites via browser. IPconfig shows wireless adapter at 192.168.1.3. When router is attached it's ip is 192.168.1.1. Disabled the wireless in the settings but no dice. When the router was used with DSL it was set at PPPoE but now that I'm just using it locally not sure whether it should be DHCP or Static or other.

View 3 Replies View Related

Linksys Wireless Router :: E1200 DHCP Systems Loose Ability To See Other Network Computers

Nov 22, 2012

Have Win7 and XP systems in my network wire connected to the router. When IP of both systems are not reserved, each computer can see other network computers and devices, five in total.A good thing that both systems get each time same IPs which even got not changed since I upgraded from E1200.When I reserve an IP for each system exactly that they currently have, both systems loose ability to see other network computers. Network shares not affected, I still can remotely access my XP box remotely from my 7 via RDP by computer name. WDTV Live wirelessly connected to the router can get/update its IP address (no connection issues) but same as others cannot see network resources.

Tried different ways, rebooted, finally ended up with device reset pushing the button.The next day I managed to reproduce the issue, but was able to revert by disabling/enabling of DHCP server.Another issue I got with an external HD connected to the router when some files got converted to folders by uTorrent started from that drive.I had to use Unlocker application to be able to delete folders converted. I can just assume that issue because of anonymous access was enabled to the external disk. No problems when same HD connected to PC USB.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Loose Ability To Use Internet On Wired / Wifi Ports

Sep 6, 2011

As soon as i modify my wireless to be unsecured, I looy ability to usse me the internet on all wired ports as well as all wireless.  From the routers point of view it still has a good solid internet connection.  Passes traceroute, but wont allow any wired or wireless connections on the internet.  I'm trying to get a Linksys WRE54G v1 to work with this so my parents can have internet once more.  If i manualy remove the security to allow the one touch Auto configuration button to work i loose my ability to surf until i run the Cisco Connection software to turn back on the passwords.

View 7 Replies View Related

Linksys Router Logging Traffic?

Mar 11, 2013

I'm looking for a tool that will let me log traffic from my Linksys router. I'm interested in seeing which devices are access thing internet from my home and to see what kind of bandwidth they are pulling down.

View 3 Replies View Related

DLink DIR-655 - Network Router Logging

Mar 24, 2012

I have Comcast internet and a DLink DIR-655 router. I have a laptop, Playstation 3 and 2 Blackberrys hooked up on my wifi. I also think my neighbor is using or trying ot use my wifi.I need a software program or piece of hardware that will allow logging of the URL's that are requested through my router.I currently use OpenDNS, and the service itself is pretty good. However, it doesn't tell which user is requesting which URL, and if a website is visited with 10 ads on it, it also shows the URL's for the ad hosting company, even though they didn't actually type that URL in.

View 5 Replies View Related

Turn Off Discover - Ability But Allow Ethernet?

Oct 10, 2011

I have Windows 7 64 Bit Pro PC connected directly to the router via Ethernet.This is I will call Ethernet Connection 1.I also have a Windows XP Pro SP3 computer connected to the same router but via a wireless connection.I have both PC's connected together via an Ethernet cable. This I will call Ethernet Connection 2.It all works fine, but I only want my PC's to communicate via Ethernet connection 2.Currently, if I disconnect the Ethernet cable between the computers I can still access the files on the Windows 7 computer via the wireless connection on the Windows XP computer.I've tried to see if this is discoverable by other people using the router by installing Ubuntu on the Windows XP machine and looking at the available networks. Lo and behold, my Windows 7 machine is discoverable and accessible - albeit by a password. This is with the Ethernet cable between the computers unplugged.I have both networks on the Windows 7 machine set to public and all sharing options switched to off. Both computers have the same workgroup name. Worryingly I can still connect to the Windows 7 machine via Ubuntu wirelessly without even using the same workgroup name!All I want to do is connect the two computers via Ethernet Connection 2. I don't want any sharing information going to the router too and hence other poeple being able to see it. Ethernet Connection 1 on the Windows 7 machine is for the internet only (same as for the wireless connection on the XP machine).

View 1 Replies View Related

D-Link DIR-655 :: Ability To Use 2 Routers At Same Time?

Oct 21, 2011

I have one Cable Modem/Router built in (Netgear CGD24N) and I wish to use two routers (the other being the DIR-655). The Netgear is a fantastic Cable Modem but a ****py router, but I wish to use both. One will be situated upstairs and the other downstairs.I have connected the two at different locations via the wall and the DIR-655 successfully went to the Netgear login page (as I went to 192.168.0.1) but internet connection was not working, whereas the Netgear internet was working. This was connected LAN to LAN.

Another procedure I have tried was connecting to them LAN - INTERNET (INTERNET being the D-link one) and received the following message: "The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."

View 1 Replies View Related

Change WPA / WPA2 Key Without Logging Into Router Page?

Feb 21, 2012

How do I change the WPA/WPA2 key, without logging into my router's page? What if, my wireless devices as home does not have a browser that I want them to be configured wirelessly?

View 4 Replies View Related

Cisco WAN :: How To Enable Logging On 2851 Router

Sep 4, 2012

Network newbie here asking an embarrassing question on logging  We have a Cisco router with the following IOS version.  I want to enable logging; so do I need to configure event-log enable before adding the following logging configuration?

View 3 Replies View Related

Cisco Firewall :: IOS Router 2851 Logging

Apr 26, 2011

One of our client has a  Cisco IOS router 2851 with Zone Based Firewalls, enabled.
 
We tried to configure the router to receive the logs and we receive it in the following format:
<189>45: *Apr 11 11:22:14.757: %SYS-5-CONFIG_I: Configured from console by vty0 (10.151.xxx.xxx)<190>46: *Apr 11 11:23:13.109: %FW-6-DROP_PKT: Dropping tcp session 10.151.xxx.xxx:1908 212.58.xxx.xxx:80  due to  RST inside current window with ip ident 0<189>47: *Apr 11 11:38:02: %SYS-5-CONFIG_I: Configured from console by vty0 (10.151.xxx.xxx)<190>48: *Apr 11 11:40:57: %FW-6-DROP_PKT: Dropping tcp session 10.151.xxx.xxx:2062 74.115.xxx.xxx:80 on zone-pair Outbound class CMAP_Inspect_Out due to  Stray Segment with ip ident 0
 
However, we support the following format:
 
<190>3711348: 3711346: Jul 23 15:29:xxx.xxx IST: %FW-6-SESS_AUDIT_TRAIL_START: Start https session: initiator (172.16.14.71:2721) -- responder (132.183.xxx.xxx:443)<190>3711349: 3711347: Jul 23 15:29:59.465 IST: %FW-6-DROP_PKT: Dropping Other session 65.209.xxx.xxx:2721 132.183.106.17:443  due to  RST inside current window with ip ident 49293 tcpflags 0x5014 seq.no 1653005683 ack 1796295020<190>3711350: 3711348: Jul 23 15:30:04.377 IST: %FW-6-SESS_AUDIT_TRAIL: Stop https session: initiator (172.16.xxx.xxx:2721) sent 807 bytes -- responder (132.183.xxx.xxx:443) sent 2062 bytes
 
What are the exact steps required to recieve the above format? If the logging needs to be enabled on Access Lists, need exact commands, from the console config mode?

View 1 Replies View Related

D-Link DIR-825 :: No Ability To Create Static LAN Routes?

Feb 6, 2011

Ok I realise that the 825 doesn't have the ability to create static LAN routes. Is there a workaround or is this somthing that may be implemented in the future. It's a real let down to find this feature missing in an expensive router such as this.

View 1 Replies View Related

D-Link DAP-1522 :: Ability To Specify A Guest Network

Oct 30, 2011

On the Dap1522 access point, in access point mode, would it be possible to have the following 2 features implemented?

1) Ability to simultaneously broadcast on the 2.4GHZ AND 5GHZ band.
2) Ability to specify a guest network.

View 2 Replies View Related

Cisco Routers :: Does RV042 Have Ability To VPN To IPhone

Jan 26, 2012

Does the RV042 have the ability to VPN to an iPhone?

View 1 Replies View Related

Linksys Wireless Router :: Logging Access In E3000

Jun 11, 2011

I am using firmware version 1.0.04 build 6.I am having a few issues viewing the log; the incoming, outgoing and security logs are completely blank, the DHCP log is the only one populated.Even though it's populated, the time stamp displays the date as Jan 1 1970, time appears fine if I use UDT (Time is set to Mountain), the Router Status correctly displays the current time for my location.I vaguely remember the other logs worked with a previous firmware 1.0.03? Don't recall if the Date Time stamp was working correctly.

View 2 Replies View Related

Lose Ability To Access Website After Idle Period (XP Pro)?

Jul 1, 2012

My XP Pro SP3 PC is connected to a Netgear DG834N modem/router via Ethernet. If the PC is left for say 4-5 hours the ability to connect to websites disappears. The browser just hangs and it's the same with IE and Firefox The odd thing is I can still ping websites by domain name without trouble. So the interenet connection is actually still in place.The problem is consistent and repeatable.Throughout this I have a second XP Pro SP3 PC also connected to the router via Ethernet and it works perfectly.

View 2 Replies View Related

Wireless Connecting Ability Doesn't Exist On Windows XP

Jun 16, 2012

How to connect my Windows XP Desktop to my homes wireless network system (my comp is outdated I know  ). I have no trouble with my my mum's Windows 7 Laptop and no problems with my MacBook Pro, but how do I connect this old clunky XP to it?

Wireless Connections doesn't exist in my network connections tab, and in Services under Admin Tool - in the 'Wireless Zero Configuration Properties' is set to Automatic startup type and it is 'started'.

View 1 Replies View Related

All Of A Sudden Lost Ability To Connect To Sharing Network?

Feb 28, 2013

I have been using a shared network (5 computers) for 2 years and all of a sudden I cannot access it anymore. It should be connecting to the host computer, CHRIS-PC, but I get an error message that Windows cannot access it. All 4 other computers can access the network fine. I did recently clear some malware off my computer with SpyBot, would that have changed any settings?

Network discovery is on
Netbios is enabled
Windows firewall is disabled
AVG firewall is disabled

[code]....

View 10 Replies View Related

Cisco Switching / Routing :: 3945 - Ability To NAT / At Least 8 RJ-45 Connections?

Nov 26, 2012

I currently have a Cisco 3945 router deployed and I am reaching the CPU's max during peak usage. The 3945 supports ~500Mbps Fast/CEF Switching and I need something at least double that capacity.

I need the ability to have at least 8 RJ-45 10/100/1000 connections. I also need the ability to NAT.

View 13 Replies View Related

Cisco Firewall :: No Ability To Walk ARP Table On ASA 5510

Mar 26, 2012

I read a number of older posts indicating that there was no ability to walk the arp table on an ASA 5510; wondering if that has changed at all?
 
Is there a syslog message that is generated when a new arp entry is added? Is that the only way to do this is to programmatically ssh into the ASA and grab the output from a 'show arp' command!

View 3 Replies View Related

Home Network :: Need A Router That Will Support Logging Into A Web Based Login?

Oct 29, 2011

I have been researching this for some time now and I can't find a solution to fit my needsI'm deployed in Afghanistan and on the base the local company they brought in has a hard wired network setup which makes you log in for internet. I want to setup wireless off of that with my own router and charge a smaller price. I know this sounds bad but they charge a pretty absurd amount. I would like to lessen that amount for the guys in my unit by splitting the price between everyone. I would like to make it look good though.

The login for the existing internet is a web based login. So, what I have come across so far is I need a router that will support logging into a web based login and support a landing page that will charge/ accept Paypal payments for new accounts and will expiredaily/weekly/monthly based on what they choose. I would like to set this up like you as a customer were loging in at a regular hot spot if that makes sense.

View 12 Replies View Related

Linksys Wireless Router :: EA4500 And Traffic Monitoring / Logging?

Jan 7, 2013

I'm thinking of switching to another ISP which is faster and cheaper than who I'm currently with. Only problem is they have data caps. Any way to log inbound/outbound traffic usage with this router so that I can make sure I'm not going to hit monthly limits?

View 5 Replies View Related

Can Quality Of Phone Line Affect Ability Of Web Pages To Load

Sep 18, 2012

Can the quality of my phone line affect the ability of web pages to load? Some times web pages load flawlessly at other times browser says web page found but it refuses to load. I assume that things could get slow if I am downloading various updates in the background. What could be my problem? My phone line is on poles-underground-been spliced and on the end of the line. Seems like when I need to connect I can't.

View 1 Replies View Related

Cisco Firewall :: 3389 Any Ability To Rate Limit Connections?

Dec 9, 2012

I'm trying to determine whether Cisco has any equivalent (in any platform) to some of the existing firewall rules within our iptables infrastructure. [code] What this does, is allow port forwards on port 3389/rdp. However, if a single IP opens too many connections within a timeframe, it starts dropping new ones.This is a critical requirements for certain security scenarios, such as preventing RDP brute forcing. A similar principle can be applied to 22/ssh.I've had a look around, rate limiting searches generally land me on QoS based discussions. I've seen people ask similar questions and get referred to CBAC. Whilst I can see similarly worded functions there such as limiting "half open" connections, I don't see anything there that limits the actual number of connection attempts you can make.

View 1 Replies View Related

Linksys Wireless Router :: E6500 Disconnecting Internet And Logging In Password

Oct 28, 2012

I am trying to configure my connectivity settings on my E6500. I enter 192.168.1.1 and the logon screen comes up. I have tried logging in with my user name and password and also disconnecting the internet and logging in the router password. After I log in, 98% of the time it says Router Not Found You are not connected to your router. It is funny that it is telling me this since this webpage is provided from the router since i have unplugged the internet. Even with the internet on, it does the same thing.
 
The times it does load the homepage of the router, I click on connectivity and when it does come up, the page is just blank with Ok, Cancel, and Apply buttons.I have done a reset on the router and reconfigured it with the CD and tried all the above again and same results.
 
I don't remember this being a problem when i first setup the router, it appears that a new firmware was automatically installed. I do not see any info on this being a known issue with the latest firmware.

View 6 Replies View Related

Linksys Wireless Router :: EA6500 Logging - Having Massive Network Variation

Dec 21, 2012

Is there a more detailed log or information from the router?I'm still having massive network variations, even with everything wire connected.

View 1 Replies View Related

Cisco :: 4507 - Lost Ability To Change Vlan With CNA After Redundant SUP Upgrade

Jul 29, 2012

We recently had redundant sup cards installed in 2 of our 4507 units after the upgrade I can no longer change Vlan's with the CNA program.I upgrade to the newest version of CNA but that didnt work.
 
I can still get Vlan information from my 4503's and 4506's with no problem. I figure it is an issue with CNA selecting the sup card to get it's information from?
 
We are in the middle of some major user moves and changes so I have had 2 of my guys working to move printers on to their own Vlan and some other changes neither is well versed in command line so I set them up with CNA for simple Vlan changes. Now with this out I have to go in and make the changes myself and keeping up with that and my other duties is getting tough.

View 2 Replies View Related

Dell :: 1012 Get PIN Code To Unlock Modem With Ability To Work With Other Operators

Feb 27, 2012

My laptop DELL 1012 is attached to the operator AT & T, which in Russia is not working. I'd like to get a PIN code to unlock the modem with the ability to work with other operators. How I can do it? [code]

View 1 Replies View Related

Cisco Routers :: RV180 - No Ability To Change IPSec Settings On Device

Nov 7, 2012

I picked up this RV180 router because it has one of the fastest thru speeds of all the routers tested that I viewed on smallnetbuilder. That and it has the cisco name. I grew tired of purchasing wireless home routers every year after they fail. So far the thing is nice with one exception.
 
I have one device that is essential on my network called an airave. It is a small device similar to a wireless access point that works on springs voice network. The thing essentially makes a small cell tower inside your house and connects to the sprint network through an Ipsec vpn. I have not ability to change ipsec settings on the device on my end. The device works fine connected to the cable modem or to the old slow dlink. When I first connect the thing it works fine for about 5-10 minutes on the cisco. Then the thing loses connection and I lose my cell phone service. Just to test any port conflicts I made this the the DMZ with no luck.
 
I have also tried a firmware upgrade. I have not messed with any of the firewall settings or port forwarding since DMZ should in theory fix that. I have assigned the thing a fixed IP address but that does not seem to make a difference. It did not on my old router and is mostly just for my sanity and to facilitate the DMZ.

View 4 Replies View Related

Dell :: Dimension 2400 - Internet Connect-ability / New Operating System?

Aug 2, 2012

I just got my dell dimension 2400 up n running again.

1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive  

2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless 

3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved