Wirelessly Connect Netgear Wgr614 V6 To Be Used As An Access Point?
Jun 3, 2011I am trying to wirelessly connect a netgear wgr614 v6 to be used as an accesspoint and my router connected to the cable modem is a dlink dir825
View 1 Replies
ADVERTISEMENT
Using Netgear WGR614 Router As Switch? (Wi-Fi Access)
Jan 9, 2012I have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.
I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?
How To Connect Netgear Wgr614 V7 Wireless Router
Mar 27, 2011i am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?
View 2 Replies View RelatedConnect A Wireless Access Point (a Tenda W311r+) Wirelessly?
Apr 13, 2012I am trying to setup my network in my home, so that I can extend the wireless signal from my main router by using an access point (a tenda w311r+).But, I want to do it so that the access point isn't connected to the main router with a cable, I want it to be connected to the main router wirelessly.It does say on the box that it can 'bridge' multiple wireless routers.
The access point I have also has 4 ethernet ports on it, so I will use one of these to plug my xbox 360 into.I also want the main router to be responsible for the DHCP.
Use Netgear Wg602 Access Point To Connect Xbox 360?
Feb 23, 2011can i use a netgear wg602 access point to connect my xbox 360 to my home network.
View 1 Replies View RelatedCannot Connect To Netgear DGND3700 Wirelessly
May 5, 2012I just bought a DGND3700, but can't get wifi working. It connects to the internet fine, but devices can only connect via ethernet cable. I can see the SSIDs - both 2.4GHz and 5GHz - but whenever I try to connect, after entering the password I'm told that "Windows was unable to connect to (SSID)". Of course, the Windows troubleshooter, but no luck. This problem happens across all my PCs and phones. The router has the latest firmware version. All blocking, access control, etc. settings are turned off.
View 2 Replies View RelatedInformation About Router - Netgear Wgr614
Feb 12, 2012I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.
View 1 Replies View RelatedWGR614 - Can't Get Into Netgear Router To Configure It
Dec 20, 2011Can't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.
p.s. the router is a Netgear model # WGR614
Netgear WGR614 V6 Will New Router Work With Old Laptop
Sep 27, 2011I need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
View 10 Replies View RelatedNetgear WGR614 V7 - Wireless Laptops Lose Connectivity
Sep 16, 2011At my office we have a simple network using a Netgear WGR614 V7 router. 4 XP machines are connected via Ethernet cable and three other people are connected wirelessly (one XP laptop, one Win7 laptop and one Win 7 netbook). It appears that whenever the netbook is on the network, the other two laptops lose connectivity. The wired machines are fine. Power cycling the router and rebooting usually solves the problem.
View 3 Replies View RelatedDg934g - Sony Vaio Cannot Connect Wirelessly To Netgear Router
Aug 31, 2012I have just bought a brand new Sony Vaio laptop VPCEH2. I have tried to connect wirelessly to my Netgear router (DG934G). The router and broadband is supplied by Sky. The laptop is running Windows 7. The router is sending a wireless sending fine to our desktop and two smartphones but the Vaio is unable to connect.
The Vaio finds the signal which is says is excellent but does not connect. Using an ethernet cable the internet connection is fine. I have been on the phone to Sky for nearly 2 hours across two nights and they have given up. We have tried setting up a new router password, disconnecting and reconnecting, establishing a connection in the Network and Sharing Cente using WPA security with no joy. I asked them if the router needed a firmware upgrade for Windows 7 and they were adamant that it did not - the firmware version is currently V2.02.44. I have checked the Windows 7 compatibility listings for Netgear routers but couldn't find the DG934G (or the DG834GT - which I believe is a newer version), listed.
The funny thing is that when Sky create a wireless connection in the sharing centre is did work for around 30 seconds where I was able to access around 5/6 webpages. The browser then stopped working and the connection was lost (with yellow warning triangle across the signal to bottom right of screen). Another thing to note was that Sky originally blamed the fault on a McAfee update. I looked into this and deinstalled McAfee and even spoke to them for a while and they confirmed that it had deinstalled and did some other tests and said it was definitely not their software causing the problem.
Configure Two Wireless Routers - BSNL UTstartcom / Netgear WGR614
Jun 13, 2012I've two routers, one which i got from BSNL when opted for internet connection. Its a Utstartcom Type II wireless modem and the other which i got from a friend is Netgear WGR614 wireless modem/router.Now coming to the real picture. I've the BSNL wireless modem connected and working perfectly on the 3rd floor on one PC, but NOT configured for wireless access and i've another PC on Ground Floor where i need an internet connection. Fortunately, i got a router/modem which is Netgear WGR614. I do not want a wired connection between these two PCs then wanted to try the wireless way?
View 1 Replies View RelatedJust Added Netgear Wgr614 Wireless Router And Now No Internet Connection
Feb 26, 2012I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
View 1 Replies View RelatedNetgear Wgr614 Wireless Router - Configure AP WG102 As Repeater
Aug 5, 2012I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?
View 3 Replies View RelatedLinksys Access Point :: WAP54G & WRT54G / Hook Up To Network Wirelessly?
Aug 1, 2012I have a DVR that I am trying to hook up to my network wirelessly. I have the wireless router in the house and can connect to it with my laptop from the shop in the back. Is there a way I connect the wireless access point to the DVR in the shop and see it on the network in the house?
View 2 Replies View RelatedWindows 7 On Dell N4110 / Unable To Connect To Netgear Router Wirelessly
Mar 15, 2012I have Windows 7 on Dell N4110. I am unable to connect to my netgear router wirelessly. If i restart the router, it may work for some time but then again gets disconnected. However, i can connect to it through wired connection. Others in my apartment can connect to the router. They dont have windows 7 (they use vista, ubuntu). Its working fine for them. I have tried many things like updating the router, disabling firewall, changing wireless security settings, updating windows but none of them seem to work. My friend who has the same laptop also cant connect when I cant. As soon as my connection is disconnected, his also disconnects.
View 1 Replies View RelatedNetgear WGR614 Local Area Connection Doesn't Have A Valid IP Configuration
Jan 27, 2013I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.
Below is what i got from ipconfig /all using a wired connection to my router.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userschenupan>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CGPC
Primary Dns Suffix . . . . . . . :
[code]....
Netgear WGR614 V9 Router - Unable To Resolve Server DNS Address / Error 105?
Dec 27, 2011I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
TPLink WA701ND / Netgear WGR614 - Dual Repeaters Accessing Single Router
Mar 23, 2012I bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
View 1 Replies View RelatedNetgear Router (DGN1000) Unable To Connect Wirelessly To Secured Or Unsecured Home Network
Feb 15, 2012I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedLinksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?
Nov 1, 2012How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedLinksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?
Apr 25, 2011I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.
Can't Set Up Netgear Wireless-N Access Point
Oct 6, 2011setting up my NETGEAR Wireless-N Access Point. I am a novice, sales person told me it was plug and play...
View 1 Replies View RelatedUsing Wireless Access Point With Netgear VMDG480?
Jan 10, 2013I have a Virgin Media Netgear VMDG480 broadband modem/router. Whilst the Ethernet performance is strong the Wifi signal strength is weak and only provides signal to half of my house. I've seen various comments on other forums that this is a common problem for this device. To overcome this I propose to install a Wireless Access Point at the far end of the house and connect this to the VMDG480 via powerlink. (I already use this powerlink connect to a PC at the far side of the house and this works really well.)
My concerns are:
1. Will the VMDG480 recognise the Wireless Access Point? I've seen some comments that suggest that this may be a problem.
2. Is there any specific type of Wireless Access Point that I should use to ensure compatibility with the VMDG480?
3. Is the use of a Wireless Access Point across powerlink a sensible approach?
4. An alternative approach is to use a Wireless Range Extender. Is this a better approach? If yes should I use a Netgear device to ensure compatibility?
Netgear DG384G - Set Up Wireless Access Point
Dec 31, 2011I have tried to set up a wireless access point using an old Netgear DG384G router as the access point. This is connected by wire to a Buffalo WBMR-G54 wireless router.I have switched off DHCP and set a static IP of 198.168.11.99 on the netgear and it is using WPA-PSK security. Buffalo is on channel 6 and on WEP, Netgear channel 11.All was working fine, could connect on laptop, Ipad and iphone all working ok and then suddenly at about 6.00PM the connection became very slow (Last 2 Nights)Tried rebboting router, switched off security and no difference.
View 3 Replies View RelatedConverting Netgear Wndr370 To An Access Point?
Apr 18, 2012I have an AT&T 2Wire Router/Modem and want to convert my Netgear WNDR370 to an Access Point.
View 1 Replies View RelatedNetgear DG834GT ADSL - Use Access Point And Router?
Feb 23, 2011I have a weird problem with my network setup. I have a netgear DG834GT ADSL router which runs fine with my Belkin 51B64C wireless router but when I enable "Use as Access Point" in order for me to see my wireless laptops connected to it the internet performance goes bad, the traffic cuts out momentarily for about 7 seconds at a time, its pretty difficult to surf the net having to wait.The setup is as follows:
Netgear
Gateway IP: 10.0.0.1
Subnet Msk: 255.255.255.0
DHCP Enabled
Belkin
Gateway IP: 10.0.0.9
Subnet Msk: 255.255.255.0
DHCP Enabled
as I said above the reason I enable "Use As Access Point" is so I can see the devices in Explorer for file sharing. Is there a way I can use port forwarding on the router to see the devices it would solve the performance problem.
Hookup 614 Router To Netgear 3300 Access Point?
May 30, 2012I tried to use my Netgear 614 router to my Netgear 3300 as an access point to gain range. But now I think I've screwed up the IP address(s) and have lost my wifi ability.
View 7 Replies View RelatedNetgear Router Setup - Access Point / Switch?
Dec 9, 2011I need to setup my Netgear as a switch/access point. I need the following set-up. My ipconfig /all reports:
View 27 Replies View RelatedLinksys Access Point :: WRT120N - Cannot Connect To An Access Point
May 10, 2013I'm using a WRT120N and have had no problems connecting most wireless devices, but a Nintendo DS and DSi owned by my family are unable to connect to the access point. My wireless security mode is disabled, network mode is set to mixed, SSID is the same as on the DS/DSi, Channel width is 20Mhz only, Standard channel is set to 6, but I tried using channel 1 and 11 without success, SSID broadcast is enabled.
I've tried every work-about I could find and always get the 51300 error code, and am at a loss as to what else I can try to get the devices to connect to the access point.
Netgear N150 Access Point WN604 Setting Up A Password?
Aug 29, 2012My son is using the above access point on his laptop. He wants to make the connection secure by having a password that you must enter in order to access it. How does he set up this password? Looked at the user manual; see the screens but don't know how to get to the screen.
View 2 Replies View RelatedLinksys Access Point :: Difference Between Wumc710 And Netgear R6300
Feb 16, 2013I´ve recently purchased a Netgear r6300 and a wifi ac bridge (Linksys wumc710) When hooking up my Readynas Pro to the r6300 via the wumc710 I only get transfer rates at max 8MB/s. That´s not very impressive, and even with the bridge located within 10 feet of the router, no walls in between. What am I doing wrong? I´ve set the MTU on the Readynas and the r6300 to 1500.When doing a wired test between the r6300 and the Readynas Pro I can copy a file from the Nas to desktop at approx 80-100MB/s, but with wireless ac via the wumc710 only at 4-8MB/s.
View 7 Replies View RelatedLinksys Access Point :: IP Address Does Not Show WAP54 But Netgear?
Feb 22, 2012Trying to setup secure net but when I type in the router IP Address, it shows Netgear, Type in printer IP address and it shows Linksys. How can I access my Linksys to make changes? I believe the Netgear shown is Comcast modem...
View 9 Replies View Related