Linksys Access Point :: Difference Between Wumc710 And Netgear R6300

Feb 16, 2013

I´ve recently purchased a Netgear r6300 and a wifi ac bridge (Linksys wumc710) When hooking up my Readynas Pro to the r6300 via the wumc710 I only get transfer rates at max 8MB/s. That´s not very impressive, and even with the bridge located within 10 feet of the router, no walls in between. What am I doing wrong? I´ve set the MTU on the Readynas and the r6300 to 1500.When doing a wired test between the r6300 and the Readynas Pro I can copy a file from the Nas to desktop at approx 80-100MB/s, but with wireless ac via the wumc710 only at 4-8MB/s.

View 7 Replies


Netgear R6300 - Added New LAN Cards / No Internet Access On One Computer?

Dec 6, 2012

I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.

If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:

Windows IP Configuration

Host Name . . . . . . . . . . . . : GATEWAY

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Mixed

IP Routing Enabled. . . . . . . . : Yes

WINS Proxy Enabled. . . . . . . . : No[code]......

View 6 Replies View Related

Routers - Cisco Linksys EA6500 Vs Netgear R6300?

Feb 24, 2013

Generally we have three people on the wifi at once, being online research, socializing (skype, ect.), and gaming. I want the best for everyone, and Ive had a Netgear router and still do, but its like wearing out. Its off and on functioning. I havent had a linksys so I have no base for those. We have windows8 and windows7 and an apple iPad on at once, generally. Im not sure if these routers are windows8 compatible..

View 7 Replies View Related

Slow Internet With New Netgear R6300 And Powerline?

Jan 3, 2013

I recently upgraded my wireless router to a Netgear R6300 and have had no problem with the wireless speeds,35mbps down and 6mbps up according to I experience similar speeds from my direct wired connection as well but I am having an issue with my speeds running through my Linksys PLE300 powerline adapter I am getting speeds of 4mbps down and 6mbps up. My PC is running Vista Home Premium SP2 (I know). Prior to the upgrade I was using a Netgear N600 and I was getting much faster speeds through the powerline. My NIC is a Intel 82566DC -2gigabit. I checked all the cables, I am using a CAT6 from router to Powerline and when I run router stats it shows WAN as 1000M/full and LAN1 (powerline) as 100M/Full.

View 3 Replies View Related

Connecting Netgear R6300 Wifi Router To Old Gateway?

Oct 3, 2012

I have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?

View 7 Replies View Related

Linksys Access Point :: IP Address Does Not Show WAP54 But Netgear?

Feb 22, 2012

Trying to setup secure net but when I type in the router IP Address, it shows Netgear,  Type in printer IP address and it shows Linksys. How can I access my Linksys to make changes?  I believe the Netgear shown is Comcast modem...

View 9 Replies View Related

Linksys Access Point :: Configuring WAP54G With Existing Netgear Wireless?

Apr 26, 2013

Having some problems connecting up my "new" AP My current set-up consists of a Netgear "Virgin Superhub" cable modem/wireless router, a ZyXEL WRE2205 (repeater) in the hall on the first floor, and Ethernet connections through to a number of rooms, including the loft. I can't get wireless access in the loft, and I want to put the AP up there, connected through Ethernet. I want to use the same SSID and security for the AP as on the router and repeater so I can roam around(!) That's possible isn't it?What I've done so far (which hasn't worked) is connected via laptop to AP, set AP into AP mode(!), set the AP to dynamic IP, set the SSID / security the same as the router/repeater, plugged the AP into the Ethernet and tried to connect.

View 7 Replies View Related

Difference Between Router And Access Point?

Sep 26, 2011

Any difference between a router and an access point

View 1 Replies View Related

Difference Between A Router And An Access Point

Oct 30, 2012

Difference between a router and an access point?

View 1 Replies View Related

Difference Between Wireless Router And Access Point

Jun 16, 2011

Difference between wireless router and wireless access point

View 1 Replies View Related

Difference Between Wireless Router And Access Point?

Jan 30, 2012

What is the difference between a wireless router and a wireless access point?

View 1 Replies View Related

Difference Between Access Point And Wireless Router?

Jul 12, 2011

what is the difference btw wireless router and wireless access point. when do we need Access point as well as wireless router.

View 1 Replies View Related

Difference Between Wireless Print Server And Access Point

Oct 10, 2012

I am trying to bridge my wireless signal from the cable modem/router located upstairs to my TV, Onkyo surround receiver, DVD , & DirecTV DVR which are all located near each other downstairs.I have a wireless print server setup near the downstairs electronics with ethernet cables running from the print server to each component

View 5 Replies View Related

Functional Difference Between Wireless Router And Access Point?

Mar 5, 2013

What is the functional difference between a wireless router and a wireless access point?

View 1 Replies View Related

Linksys Wireless Router :: WUMC710 - Bad Performance Under OSX 10.8.2

Oct 30, 2012

1. WUMC710 data rates fluctuate extremly under OSX 10.8.2 with an iMac 27" . Meaning, one second, I have about 9 mb/s in the other second, I have 20 mb/s. It is fluctuating permenently. When I use another bridge, eg. ASUS EA-N66, the datarate is very stable and I can see no major fluctuation.
2. The overall datarate when using the WUMC710 with OSX is about 50% less, than with Windows7. I have windows 7 installed as a virtual machine on my iMac. When transfering a file to my NAS device, under OSX, I have an average datarate of 18 mb/s. When I transfer the exact same file with win 7 as a virtual machine on this iMac, I have 35mb/s on average!!!!! When I use another bridge, eg. ASUS EA-N66, the datarate is the same on OSX and on windows.
3. The low datarate and the fluctuations also appear in combination with an other router, so it must be something with the WUMC710. I tested it with the EA6500 and ASUS RT-AC66U.
What I have done:

- Tested with two other adatpers (ASUS EA-N66 and built in Apple Airport). Both show constant and high datarates, so the problems only appear with the WUMC710.
- Tested with another router. The low datarate and the fluctuations also appear in combination with an other router, so it must be something with the WUMC710. I tested it with the EA6500 and ASUS RT-AC66U.
- Tested with another OSX device. Same problems with an iMac 27" and with a MacBook Pro. So not a specific problem with one apple device
- Tested with another windows device. Under windows, the WUMC710 shows way better performance and nearly no flucuations in data rates.As I have tested other Wireless adapters, combinations with other routers and other OSX/Win devices and the problems are alyways the same, It must be a bug of the WUMC710. Performance under OSX 10.8.2 is slow and not constant.

View 5 Replies View Related

Linksys Wireless Router :: Wumc710 With Ea6500 - No Ip From Dhcp?

Jan 27, 2013

I have WUMC710 connected wirelessly over 5GHZ to EA6500. EA6500 is connected to fios router. fios router hands out ip addresses. EA6500 is in bridge mode.
I get ip addresses on any device that connects directly to ea6500 over wireless (both 5ghz or 2.4ghz). However, when I conenct to WUMC710 wired connection, I can't get any IP from DHCP. I have reflashed firmware on WUMC710 to no avail.

View 7 Replies View Related

Can't Set Up Netgear Wireless-N Access Point

Oct 6, 2011

setting up my NETGEAR Wireless-N Access Point. I am a novice, sales person told me it was plug and play...

View 1 Replies View Related

Linksys Wireless Router :: WUMC710 Slow Speeds With EA6500?

Jan 21, 2013

Unlike other people, I haven't (yet) experienced any flapping of the wireless connection: it's stable but slow.
My problem is that Samba share speed are 50MB/s without using the WUMC710 (connected directly to the router) and about 10 MB/s with connection to the WUMC710. Computers have gigabit NICs and proper cables.
The WUMC710 is about 5 metres from EA6500 and there are no obstacles. The WUMC710 says that signal is 100%.
On the EA6500 the 5GHz band is on and I have tried almost every possible compination with the settings: all the way from Mixed and full automated to Only AC and 80MHz. I also tried resetting both devices.

View 9 Replies View Related

Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?

Nov 1, 2012

How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at does not work.

View 1 Replies View Related

Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network

Aug 29, 2009

I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1.  My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
I found directions in the forum for a setup using the LG BD390  but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold  from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi. 

View 3 Replies View Related

Using Wireless Access Point With Netgear VMDG480?

Jan 10, 2013

I have a Virgin Media Netgear VMDG480 broadband modem/router. Whilst the Ethernet performance is strong the Wifi signal strength is weak and only provides signal to half of my house. I've seen various comments on other forums that this is a common problem for this device. To overcome this I propose to install a Wireless Access Point at the far end of the house and connect this to the VMDG480 via powerlink. (I already use this powerlink connect to a PC at the far side of the house and this works really well.)

My concerns are:

1. Will the VMDG480 recognise the Wireless Access Point? I've seen some comments that suggest that this may be a problem.

2. Is there any specific type of Wireless Access Point that I should use to ensure compatibility with the VMDG480?

3. Is the use of a Wireless Access Point across powerlink a sensible approach?

4. An alternative approach is to use a Wireless Range Extender. Is this a better approach? If yes should I use a Netgear device to ensure compatibility?

View 3 Replies View Related

Netgear DG384G - Set Up Wireless Access Point

Dec 31, 2011

I have tried to set up a wireless access point using an old Netgear DG384G router as the access point. This is connected by wire to a Buffalo WBMR-G54 wireless router.I have switched off DHCP and set a static IP of on the netgear and it is using WPA-PSK security. Buffalo is on channel 6 and on WEP, Netgear channel 11.All was working fine, could connect on laptop, Ipad and iphone all working ok and then suddenly at about 6.00PM the connection became very slow (Last 2 Nights)Tried rebboting router, switched off security and no difference.

View 3 Replies View Related

Converting Netgear Wndr370 To An Access Point?

Apr 18, 2012

I have an AT&T 2Wire Router/Modem and want to convert my Netgear WNDR370 to an Access Point.

View 1 Replies View Related

Wirelessly Connect Netgear Wgr614 V6 To Be Used As An Access Point?

Jun 3, 2011

I am trying to wirelessly connect a netgear wgr614 v6 to be used as an accesspoint and my router connected to the cable modem is a dlink dir825

View 1 Replies View Related

Netgear DG834GT ADSL - Use Access Point And Router?

Feb 23, 2011

I have a weird problem with my network setup. I have a netgear DG834GT ADSL router which runs fine with my Belkin 51B64C wireless router but when I enable "Use as Access Point" in order for me to see my wireless laptops connected to it the internet performance goes bad, the traffic cuts out momentarily for about 7 seconds at a time, its pretty difficult to surf the net having to wait.The setup is as follows:

Gateway IP:
Subnet Msk:
DHCP Enabled

Gateway IP:
Subnet Msk:
DHCP Enabled

as I said above the reason I enable "Use As Access Point" is so I can see the devices in Explorer for file sharing. Is there a way I can use port forwarding on the router to see the devices it would solve the performance problem.

View 15 Replies View Related

Hookup 614 Router To Netgear 3300 Access Point?

May 30, 2012

I tried to use my Netgear 614 router to my Netgear 3300 as an access point to gain range. But now I think I've screwed up the IP address(s) and have lost my wifi ability.

View 7 Replies View Related

Netgear Router Setup - Access Point / Switch?

Dec 9, 2011

I need to setup my Netgear as a switch/access point. I need the following set-up. My ipconfig /all reports:

View 27 Replies View Related

Use Netgear Wg602 Access Point To Connect Xbox 360?

Feb 23, 2011

can i use a netgear wg602 access point to connect my xbox 360 to my home network.

View 1 Replies View Related

Linksys Access Point :: WAP54G Access Point Setup After A Reset?

Jul 9, 2006

I had to reset my access point but the login screen fails to appear to lock the router.  I don't have the setup wizard disk.

View 9 Replies View Related

Linksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point

Jan 17, 2013

I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?

View 1 Replies View Related

Linksys Access Point :: WRT320N Access Point Vs Range Extender

Dec 14, 2011

Have a WRT320N router at one end of the house in the basement.  Would like to boost signal to other end of the house.  Which product should i use, an access point or a range extender?  My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.

View 1 Replies View Related

Linksys Access Point :: WAP4410n MIBs Or OIDs For Access Point

Jul 3, 2012

I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?

View 1 Replies View Related

Linksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?

Apr 25, 2011

I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
 The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page( after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved