Netgear R6300 - Added New LAN Cards / No Internet Access On One Computer?
Dec 6, 2012
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
View 6 Replies
ADVERTISEMENT
Jan 3, 2013
I recently upgraded my wireless router to a Netgear R6300 and have had no problem with the wireless speeds,35mbps down and 6mbps up according to speedtest.net. I experience similar speeds from my direct wired connection as well but I am having an issue with my speeds running through my Linksys PLE300 powerline adapter I am getting speeds of 4mbps down and 6mbps up. My PC is running Vista Home Premium SP2 (I know). Prior to the upgrade I was using a Netgear N600 and I was getting much faster speeds through the powerline. My NIC is a Intel 82566DC -2gigabit. I checked all the cables, I am using a CAT6 from router to Powerline and when I run router stats it shows WAN as 1000M/full and LAN1 (powerline) as 100M/Full.
View 3 Replies
View Related
Feb 16, 2013
I´ve recently purchased a Netgear r6300 and a wifi ac bridge (Linksys wumc710) When hooking up my Readynas Pro to the r6300 via the wumc710 I only get transfer rates at max 8MB/s. That´s not very impressive, and even with the bridge located within 10 feet of the router, no walls in between. What am I doing wrong? I´ve set the MTU on the Readynas and the r6300 to 1500.When doing a wired test between the r6300 and the Readynas Pro I can copy a file from the Nas to desktop at approx 80-100MB/s, but with wireless ac via the wumc710 only at 4-8MB/s.
View 7 Replies
View Related
Feb 26, 2012
I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
View 1 Replies
View Related
Feb 24, 2013
Generally we have three people on the wifi at once, being online research, socializing (skype, ect.), and gaming. I want the best for everyone, and Ive had a Netgear router and still do, but its like wearing out. Its off and on functioning. I havent had a linksys so I have no base for those. We have windows8 and windows7 and an apple iPad on at once, generally. Im not sure if these routers are windows8 compatible..
View 7 Replies
View Related
Oct 3, 2012
I have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?
View 7 Replies
View Related
Aug 20, 2012
Have two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies
View Related
Jan 28, 2012
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies
View Related
May 10, 2012
Wireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.
View 1 Replies
View Related
Jun 24, 2012
I have a 4 computer MS LAN connected to a router that is connected to a ISP disk outside the house and all computers have internet access. I now want a redundant backup on connecting to the Internet. I have a Wild Blue Internet Disk outside the house that we used to use.Can I install another LAN card and just have that connected to Wild Blue?
View 1 Replies
View Related
Mar 13, 2013
I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connection
View 1 Replies
View Related
Mar 29, 2011
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies
View Related
Feb 27, 2012
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Mar 29, 2012
It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Sep 2, 2012
My Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
View 1 Replies
View Related
Nov 4, 2011
I have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies
View Related
Mar 22, 2011
Is it possible to configure 2 wireless cards in one computer in order to connect to 2 wireless networks at the same time? Windows XP Pro SP3
I haven't tried the config yet but I'm curious how WZC will distinct between the two cards.
View 3 Replies
View Related
Sep 2, 2012
i bought the netgear wgr614v10 router yesterday from yesterday i was trying to connect to wifi but i could setup
View 3 Replies
View Related
Sep 4, 2011
yesterday I had switched between my two wireless routers, I went from my Linksys WRTU54G-TM back to my Netgear WGT624v3 because I read that the Netgear provided better range and a bit better speed. I understand that this could be the problem but when I tried to swap out to the Linksys, during the setup, it claims that I have no running internet. The modem is fine, I hooked it straight to my laptop AND my desktop. Now the problem is, I have my desktop and my Xbox 360 connected into the LAN ports, I can connect with my phone and my iTouch wirelessly. My laptop I'm afraid will connect but will not associate with the internet and therefore I cannot access the internet. The Router is a G router and the laptop has a standard wireless g adapter built in.
View 19 Replies
View Related
Mar 3, 2012
My old router (a dlink dir-615) works just fine, but I figured I would upgrade and try to run OpenWRT or DD-WRT so that I could have one VPN for all my devices.
Anyway, I took the router out and followed the instructions (power off modem for at least 1 minute, connect modem to router, router to computer via ethernet, turn on modem first, wait for it to fully boot up, turn on router, wait for it to fully boot up, and then run the setup on routerlogin.net. The router is currently setup and I can connect my computer or iphone to it just fine, but I cannot access the internet. It doesn't make a difference whether I'm connected via ethernet or wifi. Either way, I get a "No Internet Access" message from Windows 7.
I've tried turning everything off and starting again. No luck. When I go back to my dlink router, everything works fine again.
So, in short:
Modem + ethernet = internet
Modem + Netgear router + ethernet = no internet
Modem + Netgear router + wifi = no internet
Modem + Dlink router (wifi...haven't tried ethernet) = internet
View 8 Replies
View Related
Jun 18, 2011
I can connect directly to the router wirelessly without any problems. When I use my powerline adapter I get the 'unable to contact DHCP Server' error. I've tried unencrypting the router with no success. I've also released/ renewed my IP. [code]
View 1 Replies
View Related
Dec 28, 2011
I have a Netgear ProSafe FVS318 wireless router whose login information I have lost. I have attempted to manually reset it using the reset button on the back, and return it to factory default settings (thus resetting the login information to admin/password).I have checked everywhere, including the documentation for the router itself. I have gotten multiple instructions on how to reset it (generally telling me to hold the button down for anywhere from 10 seconds to 30 seconds until the test light blinks or stays solid and then blinks or stays solid again, or telling me to hold down the button while turning it on). None of these methods have worked. The router still will not reset. It never reboots no matter how long I hold down the button, no matter when I release it, no matter what the orange "test" light is doing, and no matter if I begin with the router on or off. It will not reboot and I still cannot login.
The orange "test" light has behaved the same way each time; after 10 seconds, it turns solid, and then begins blinking before turning back off. After 20 seconds, it turns solid, and then turns off. It does this if I hold the reset button down for 10 seconds, regardless of whether or not I release the button after it first turns solid. If I continue to hold down the reset button, it continues this pattern indefinitely, for as long as the button is held. When I turn the router on, it turns solid before turning off, regardless of whether I am holding the rest button down. Its behavior never deviates from the observed patterns regardless of what I do. At no point has the router ever rebooted on its own.The default login should be admin/password, as this information is included on the bottom of the router, and in its documentation.
View 14 Replies
View Related
Jan 24, 2012
I might fancy having my desktop stay in a sleep state, waking whenever I need to access it for a file or something, so I tried to use WOL. The nic and bios support it, however when I enable it...
The machine only stays off off for 5-10 seconds at a time. I think this is because instead of waking from only a magic packet, it is waking from ANY packet.
View 1 Replies
View Related
Jul 3, 2011
I have a laptop connected to an home router through its built in wireless card. It has checked the "share internet conexion" option. I can browse on internet with this laptop.The same laptop have another usb wireless card configured as ad hoc with the other(s) computer. This second computer is communicating with the first one, but the router does not answer the ping call (and I cannot browse on Internet with this computer either).
View 5 Replies
View Related
Feb 6, 2012
I've just moved my desktop computer back to my parents house. there is an Internet connection in the house already. if I plug the cable into my laptop it works instantly. when I plug into the desktop there is nothing the green light turns on at the back of the tower but otherwise the computer doesn't register anything at all.
View 7 Replies
View Related
Oct 11, 2012
My laptop says i am connected to the netgear but i am unable to access the internet-
View 1 Replies
View Related
Aug 3, 2012
Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]
View 18 Replies
View Related
Oct 10, 2011
I got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.
View 1 Replies
View Related
Feb 18, 2011
Out of no where today, my wireless connection has begun saying "No internet access" and I can't go anywhere online Ever since it began happening, it's been saying that for longer amounts of time. So at first it was only a few seconds, now it's been taking a minute until I re-gain internet access. I haven't installed anything or ran any executables lately, don't have any viruses, I obtain my DNS and IP addresses automatically, and a few minutes ago I installed the newest firmware update of my router and I'm still losing internet. I have a NetGear WNDR3400 router.
View 14 Replies
View Related
Dec 12, 2012
I have a Netgear N600 connected to a modem. I want to connect a switch to the Netgear N600, my question is, will multiple computers connected to the SWITCH have access to the internet?
Router : Netgear N600 [URL]
Switch: Rosewill RC-405X 10/100Mbps Switch [URL]
View 4 Replies
View Related
Nov 4, 2011
My desktop was connected to wireless router by ethernet cable but it seems the ports on the router are now US. Bought netgear N300 USB adapter and installed. Had problems getting "limited connectivity etc" messages 'cos wasn't getting IP address allocated. Have now manually allocated IP address and connection status is now "Connected" (with no warning about limited connectivity etc). However I can't connect to the internet.
View 12 Replies
View Related
