I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connection
View 1 Repliesaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View RelatedI have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
My fianc just reinstalled Windows XP Home Edition last night as his computer was virus-ridden and it was becoming impossible to use. It took a couple times for the computer to even pick up the Windows disc, but fourth time lucky and it was good to go. Once reinstalled we tried to get everything checked and download some anti-spyware etc, but it wouldn't pick up the router. The router is wireless, but connects to his computer via a cable. The router is a Netgear 54 MPBS Wireless Router, DG834G v3. We have been told that the computer should just automatically pick up the router, but the only way it will allow us to try and connect is via a dial up connection.
View 2 Replies View RelatedI have a Netgear wireless router that is connected to my desktop in my house to broadcast wireless throughout. However, the main computer is hooked up to an ethernet cord for a hardwired LAN connection. For some reason, my desktop will constantly disconnect from LAN and switch to wireless, back to LAN to wireless etc.
View 1 Replies View Relatedi load windows 7 onto it and try to get into internet explorer to get google chrome and it says that i need to configure a network so i try and configure one but it says that no networks are connected to it.i had vista on it before windows 7(still couldn't connect)and it said that it was a realtak router but underneath the router it says that it's netgear i don't know which one it is.i have gotten into the router using its ip.also the model for the netgear part is b90-755044-15 it work just fine for this computer although it's on windows XP do i need a driver for the mother board,router,or what.
View 2 Replies View RelatedI have a NetGear WNR-1000 wireless G router. I currently only have 1 computer hooked up but I have had 3 computers hooked up to it before. It doesn't matter what internet it's connected to or how it's connected to the modem itself. I have had DSL and Cable hooked up to it and I am currently using it as a secondary router behind my roommates old Wireless B router. He currently has all of his things hooked up via ethernet and wirelessly to his router. So, im download the xirrus wifi inspector thing. It doesn't matter the OS either. I've had XP sp3, vista, and 7 all hooked to it and it's the same all the way around and it doesn't matter the kind of wireless card either!
View 1 Replies View RelatedI am trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
View 1 Replies View RelatedI have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well
View 5 Replies View RelatedI try to maintain a sizable network at my workplace. We have 10 desktops, 3 laptops (sometimes more) 4 printers/fax, etc.etc. I have just ordered a new HP Pavilion Slim-line S5000 Series with Windows 7 Pro. I cannot get it to connect to the Network. I have set up the server (which runs windows server 2008) with an account called "communications" I have named the computer "communications". I go to the system and security>system: computer name,domain, workgroup settings>change settings. I enter all the information correctly, and it tells me it cannont find the network path. This is happening on this brand new computer, and our old dell optiplex 760 (running windows vista pro). We use a netgear pro-safe 24 port 10/100 switch hub, and a linksys wireless G broadband router model WRT54GS.
View 10 Replies View Relatedi bought the netgear wgr614v10 router yesterday from yesterday i was trying to connect to wifi but i could setup
View 3 Replies View RelatedI just recently purchased a Net Gear wireless router, I am unable to get on the internet unless I have the ethernet connected to my laptop.
View 1 Replies View RelatedI have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.
View 7 Replies View RelatedI recently moved from one city to another, and I still have my same ISP. However, I can't get onto the Internet through my same Netgear router. I can connect to the Internet when directly connected to my modem, and I can ping my router from my laptop wirelessly, but the router won't let me onto the Internet. I tried to modify some settings on the router itself (192.168.1.1), but I think I may have just gotten myself in deeper. It's currently setup for no security, and even with that I still can't get on. I might mention that I can't get on through the wireless router either connected or wireless.
View 10 Replies View RelatedAfter a quick power surge forced my desktop to reboot, it can't connect to my wireless network, even though everything else can. It may have been applying windows updates at the time of the surge.
Earlier today I shut down my computer to apply some windows updates. A few minutes after it rebooted a power surge knocked it out for an instant and the computer rebooted again. I don't know if it was done applying the updates but for some reason it can no longer connect to a wireless network. It keeps saying "unknown reason" when it fails to connect. I think I had a static IP attached to it.
My iPhone and iPad can still connect to this network, but this one computer can't. It's a desktop running Windows Vista Home Premium with a broadcom adapter added to it. It's too far away to connect to any wired connection. My router is a Netgear WGT624 v4.
I don't think I can post any IPconfig information here because I'm forced to type this on an iPhone.
For some reason I cannot ping or FTP on a specific computer on my home network. All other computers work fine and the specific computer works fine on other networks. But the combination of this computer and my home network it doesn't like.
I have disabled both windows firewall and my virus software but nothing seems to work. It seems to be a timeout issue as FTP and ping sometimes does work but FTP is increadibly slow when it works and the ping time is very high 670ms and above. I am running windows 7 and my router is a netgear n150
Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this
View 14 Replies View RelatedI have a Netgear Router at home, and both my Laptop and Tablet connect to it via WiFi. Now on both the Laptop and Tablet, Internet has recently become VERY slow. I contacted my ISP and they said everything on their side is fine, so it has to be on my side.What can cause this? I've checked for Malware but the fact that both the tablet and Laptop has slow internet points to the router. I also flushed my DNS on my laptop and booted into safemode with networking, internet still ridiculously slow.Note, both the laptop and tablet travel with me and did connect to other networks sometimes.
View 3 Replies View RelatedI am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 Replies View RelatedI have read most of the responses to the same type of problem but none of them have got my XP pc to connect to the internet. I am using Wireles and LAN.My router was Netgear DG843N which was intermittently dropping the connection to the net. I tried corrective action but the problem continued.On the advice from Netgear tyech support,I tried just using LAN - that didn't work. Then they suggested using another router,so I purchased a Netgear DGN1000 Router.This did not resiolve the problem so I contacted Netgear who suggested several things to do.As the XP was connecting to the router both wireless and LAN we decided that it was not a router problem.All of my devices attached o the router ( printer - Vista pc- Win 7 laptop)are working correctly,just the XP pc that is not.
Details of the pc are :-
Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
I cant get this to work and maybe it's not possible to even do it. I have 2 laptops one old running XP and one new running 7. I have DSL Sprint modem that works fine when directly wired to either laptop. A friend gave me an old Netgear Wrt54g wireless router he had laying around so I could connect both laptops to the internet. I cannot do this wired or wireless. When I try wired the internet doesn't work. When I try to do it via wireless the new Windows 7 laptop says it isn't compatible. Any way to get this to work either way on both? Or do I need to pick up a new router. Also, I would prefer a wired connection so any recommendations for a wired router that will work with this setup.
View 2 Replies View Relatedi have an old Netgear MR 314 router that works like a charm for my wired connections, but whenever i try to connect wirelessly from my phone or laptop, it connects but doesn't access the internet.
View 5 Replies View RelatedI dont know how to set this Netgear router to make my internet wireless
View 1 Replies View RelatedI live out in the country at the end of a very long copper cable and my internet connection is never great at the best of times. Also live in an old house with thick walls so the family are always complaining about the poor wireless connection.So I bought a new router, netgear DGN3500, which on the whole seemed pretty good out of the box, but now it is randomly dropping the internet connection. Sometimes this is solved by rebooting the router, but just now this didn't do it and only turning it off completely for 30" and turning it back on again gave me back my connection (DownStream Connection Speed 3680 kbps, UpStream Connection Speed 416 kbps - which is as good as it gets on the end of my phone line).
View 12 Replies View RelatedCannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
I have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies View RelatedI have a wireless Netgear WGR614v5 router, 54Mbps which is approx 6 yrs old. I also have the high speed cable internet service that provides up to 10 Mbps DL speed. Since my router still works, is there any reason I should replace it or is it possible it degrades in speed as it ages?
View 9 Replies View RelatedI need to make this connection to be able to operate a Enphase Solar electricity inverter reporting system.
View 1 Replies View RelatedOut of no where today, my wireless connection has begun saying "No internet access" and I can't go anywhere online Ever since it began happening, it's been saying that for longer amounts of time. So at first it was only a few seconds, now it's been taking a minute until I re-gain internet access. I haven't installed anything or ran any executables lately, don't have any viruses, I obtain my DNS and IP addresses automatically, and a few minutes ago I installed the newest firmware update of my router and I'm still losing internet. I have a NetGear WNDR3400 router.
View 14 Replies View Related