Can't Connect To Internet With Netgear Router
Jun 24, 2012I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.
View 7 RepliesI have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.
View 7 RepliesTrying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this
View 14 Replies View RelatedI am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 Replies View RelatedI cant get this to work and maybe it's not possible to even do it. I have 2 laptops one old running XP and one new running 7. I have DSL Sprint modem that works fine when directly wired to either laptop. A friend gave me an old Netgear Wrt54g wireless router he had laying around so I could connect both laptops to the internet. I cannot do this wired or wireless. When I try wired the internet doesn't work. When I try to do it via wireless the new Windows 7 laptop says it isn't compatible. Any way to get this to work either way on both? Or do I need to pick up a new router. Also, I would prefer a wired connection so any recommendations for a wired router that will work with this setup.
View 2 Replies View RelatedCannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies View RelatedI have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies View Relatedaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies View Relatedi have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies View RelatedI have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies View RelatedI have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies View RelatedI recently installed a NetGear router to my PC in order to do online gaming. Now my laptop does not connect to the internet. I have spent over 9 hours on the phone with Centurylink (the internet provider); Netgear (the router) and HP (the laptop). Each one says its not their problem. The laptop can find our connection, it says "Connected". However it then says "Internet access denied".
View 5 Replies View RelatedUnable to connect to the internet thru router.
Hardware:
Motorola Modem
Netgear N-300 WNR2000v3 router
Dell Vostro 470
Tried numerous times but no Internet connection between Directv hr23-700 and Netgear DSL 7550 modem/router. Is connected to home network, but no Internet.
View 1 Replies View RelatedI have a functioning wireless network at home, but I can't get my computer to connect to the internet. I bought a new wireless usb adaptor (Netgear N-150, WNA1100VC) and tried to install it. The computer at first connected to the internet, but the next day it did not. I unistalled the software and tried to reinstall it, but I got an error message saying the driver was not digitally signed and I should contact the provider. I have done this, and Netgear have given me instructions on how to fix. The problem is that now when I packed up my computer and re-assembled so I can plug the ethernet cable directly into it, I still can't connect to the internet.I get a message saying I'm connected to the wireless network, but can't connect to the internet.When I click on the "Diagonose Problem" it says the following:Windows Network Diagnostics Window.There might be a problem with one or more network adaptors on this computer
1. The network adaptor "Realtek RTL8168C (P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)" is experiencing driver or hardware related issues
2. Make sure your internet protocol bindings are correct - Ensure that "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" are selected in the configuration for the network adaptor "Local Area Connection"[code]
In Room 1 Computer 1 and computer 2 are connected to the Verizon box via ethernet cables using port LAN 1 & LAN 2.In Room 2 I have Computer 3 connected to the Verizon box using Wireless I then added a ethernet cable into Computer 3 that goes into a Netgear box the ethernet cable goes into the Internet port I then run a ethernet cable into port 1 in the netgear box into the Xbox 360 and on computer 3 I bridge the wireless and LAN connection this then lights up the netgear box showing Internet and Gives the Xbox internet connection but Computer 3 shows and will not connection to the internet just that it is on the LAN network.
View 6 Replies View RelatedI bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]
There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]
I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.
Im really sure the extender is in the range of my actual router!
I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies View Relatedwhen i click on connect to network nothing happens. it doesn't do anything, but if i plug in my old router it will connect just fine. It's just the new router
View 1 Replies View Relatedi have two computers in my house, the main one is connected to the internet with a Netgear N600 router. Computer 2 connects to that connection wirlessly with a D-link adapter.However after i reinstalled the OS to the main one, computer 2 suddenly is unable to even see the connection. i checked my smartphone which also used to connect when i was home and that can't see the connection either.
View 1 Replies View RelatedHave a netgear WNR854T with three access points connect to the router. The problem I am having for example is the access point is not letting me get on the internet. I have to keep turning off and on the router then the wireless access point work fine.
View 1 Replies View RelatedWe recently connected the Netgear WNR2000 to our modem. All wireless devices connect just fine, except for our Roku XD. It says there is an activation error. I've reset the box, unplugged, changed the channel via wireless settings. What's next??? I'm quite frustrated and would like to get this to work. The message I get is "activation issue. There was a problem connecting to the Roku server". Argh!! It was working fine with the other wireless modem/router (versalink 327W), but it kept going off (as in the signal would drop and we would have to turn it off/on to get it to work) and connected the netgear router to it today.
View 5 Replies View RelatedHow do you connect a usb modem to a wireless router?
View 1 Replies View RelatedI am trying to set p my Netgear wireless router but each time I type in the IP address, it says the page cannot be found. I am using Windows 8
View 2 Replies View RelatedChild at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies View Relatedconnecting my old laptop to my router (Netgear WNDR3700v2) The router is an N router but is backwards compatible, but my laptop can't find it. The laptop is an LG LE50-5273V. I looked into the device manager and found two network adapters; 802.11b/g wireless adapter and Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller. So it should be able to connect to it? Besides from that laptop I have another PC connected to the router and it works (Using N), Will I then be able to combine both N with B/G?
View 2 Replies View RelatedI just bought a new Netgear N300 router to go along with the Mediacom cable internet I just signed up for. I can plug the ethernet cable straight from the modem into my computer and get internet. Unfortunately this only works after I run the windows diagnostic to correct the errors that wont allow me internet access (unable to connect to IP address, lack of DNS server) but eventually I get access. The instruction then tell me to run the ethernet from the modem to the router and then another cable to my computer from the router. When I do this, I lose all internet access. I thought I just had to instal the router using the provided disk but it never gets past the internet connection test.I have tried to provide the correct IP address, subnet mask, default gateway and dns servers like requested but clearly I am messing something up.
View 5 Replies View RelatedI just bought a new HP notebook, and when I type in the passcode it says that I may have mistyped the passcode. This is not the case, I have two other computers working on the router, and I even generated a new passcode and reset the other two computers and they connect fine. HP directs me to Netgear support, and they are trying to tell me that the notebook is a "different platform" than a regular desktop or laptop, and I need to pay them $99.95 to change some settings in my router to make it work.
View 4 Replies View Relatedi am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?
View 2 Replies View RelatedI have a 4g hotspot with no places to connect a cable, etc. I wanted to know if and how i can get a Netgear WGR514 router to pick up the 4G signal. I need this router because I have some other equipment that i need to connect that does not accept wireless signals.
View 1 Replies View RelatedI am running windows vista on my HP laptop (not sure what kind of laptop it is it just says HP on it) it wil no longer connect to my wireless NETGEAR WNR2000v3 and when I do get it, its local only. I recently had virus infections removed from someone who used AVIRA and MBAM (malaware anti bytes)
edit I tried to disable the autoscaling feature in windows and it did not work /I am running windows vista home 32bit/I can connect to the router now I had the wrong security type selected WPA instead of WPA2, but it still reports local only, I checked my router logs and it shows that it connects but it does not give me information on if it is blocking the laptop from the internet or if my laptop is. I have tried turning off the windows firewall and resetting it as well now.
I have tried the things listed below
- uninstall and reinstall windows wireless adapter drivers through computer managment
- disablied IPv6 through wirless adapter properties (unchecking the box)
- reset my rounter entirely (after which I can no longer connect to the router at all, where as before I did this I was able to connect to my router but it was local only) held the reset button for 10 or more seconds plus unplugged my modem and router for 5 mins, I know its alot of time for that but I was eating but regardless, after which I turned on my modem let all the lights go through their setup then I turned on the router let all the lights do their thing, and then my laptop to make sure everything picked up new settings.
-something threw me off also under computer managment under the network adapters there were ipv6 to ipv4 "tunnels" or something, they had the yellow warning sign on it.
I recently purchased and successfully installed a NetGear N600 dual band router (WNDR3400). My desktop has no connection issues. My iPod Touch has no issues connecting to the wireless network. However, my phone (HTC Aria), my work computer (Dell Latitude D630 Win XP) and my brand new HP Slate 500 (Win 7 Pro) cannot connect to the network. The network is discoverable by all the devices but the 3 cannot connect. I removed all security and still was not able to connect.
I reinstalled the router and still not able to connect. I restarted the router and still not able to connect. The Dell did previously connect to unsecured networks in my neighborhood but does not seem to like my newly set-up network. I am most surprised that the Slate is unable to connect to the wireless network. I would think something brand new would like that would not have an issue. If I cannot get my wireless router working properly and my other computers able to connect to it, it makes them all pretty useless.
I cannot connect my Kindle to my netgear WPN824 router. I can't locate the router Password, not pass phrase.
View 1 Replies View Related