I am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 RepliesI also am using a Dell Inspiron N5010 with Windows 7 and have trouble connecting to Netgear WNR 1000. I have an Apple that has no trouble making that connection. I have spent over $100 to a local computer repair company trying unsuccessfully trying to fix the problem and $129 to Dell Technical Services with equal lack of success and then was told by a technical support person that they had fixed it, that they would not provide futher work to fix it. The fact is that the error occurred again immediately the moment the Dell technician hung up. I spent the following day just running internet on a cable connection for about 8 hoooting.ble shurs trouble free and then switched it to wireless, which failed in about 10 minutes as my own troubleshooting. This made it clear to me that the problem was only in the wireless connection.
They problem is the Blue Screen error time message that pops up at random times any time the computer is operating on wireless. At other timerred again immediatelyre occuthe failuat s it operates normally. The Blue screen error causes the computer to shut down and restart. The only solution I have found is to return the Netgear router to the store where I bought it (within 30 days of purchase) and pay the additional cost of a different router.
Service personell should at least be kept aware or incompatibilites, explained or unexplained, between particular router models and particular computer models so as to save this waste of time and money. I have lost about 3 weeks of useful time on this computer in addition to over $200 in direct costs attempting to find a fix.
Im having a horrible problem with my internet connection where I cannot use any kind of download site such as filefront or anything really.The main problem is once a download gets going (any filesize above 1MB) the connection will stall out and stop downloading until the server says cannot download or if available, i pause and start the download again. Its very frustrating having to babysit downloads or be unable to even complete one ,My router is a netgear N150 WNR 1000.
View 14 Replies View RelatedI have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies View RelatedThe internet is working fine though when i bypass the router and go straight through my modem
View 1 Replies View RelatedI have an HP Pavilion TX-1000 Entertainment PC that is really frustrating me. It will not connect to my wireless router. I have had this laptop for at least 3 years and it connects to any other wireless connection I've ever tried ( at my sons with Cox, every airport, overseas, and with my previous Qwest routers ). Since I moved and now have a Qwest PK5000Z router this laptop will not connect. The error message I get is " The network security key is incorrect ", but it's not of course. All other laptops I've used here connect successfully, Dell, Mac, Toshiba, etc.
View 1 Replies View RelatedI've had my Vostro 1000 Laptop for almost a year now. I had to reload the O/S. I put all the CDs in and downloaded all the drives, but now I don't show the WLAN card/connection.. nothing.
I can't connect to the internet and when Iook at the network adapters it only shoes the Broadcom 440x 10/100 intergrated controller.. My modem is only showing Conexant HDA D330 MDC v.92 modem.
I had the internal wireless with my laptop when it was given to me as a gift... and have been able to connect via wifi, etc.. but since reloading the O/S and all drivers, etc.. I don't have internet? Can't find this wireless connection?
According to the Time Warner website, my Road Runner Turbo with Power boost is capable of download speeds up to 15 Mbps, which seems to be far surpassed by all wireless routers. So what are the benefits of routers such as the Netgear WNR2000 and beyond with speeds up to 300 Mbps vs the Netgear WNR1000 with speeds up to 150 Mbps?
I'm more than willing to spend more for increased performance, but don't fully understand what benefits I'll see by dropping more than about $40 on something like the WNR1000.By the way, I'm in a two bedroom apartment and regularly have two laptops, a PS3, and Droid X connected to the internet.
I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.
View 7 Replies View RelatedTrying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this
View 14 Replies View RelatedI cant get this to work and maybe it's not possible to even do it. I have 2 laptops one old running XP and one new running 7. I have DSL Sprint modem that works fine when directly wired to either laptop. A friend gave me an old Netgear Wrt54g wireless router he had laying around so I could connect both laptops to the internet. I cannot do this wired or wireless. When I try wired the internet doesn't work. When I try to do it via wireless the new Windows 7 laptop says it isn't compatible. Any way to get this to work either way on both? Or do I need to pick up a new router. Also, I would prefer a wired connection so any recommendations for a wired router that will work with this setup.
View 2 Replies View RelatedCannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies View RelatedI have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies View Relatedaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies View Relatedi have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies View RelatedI have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies View RelatedI have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies View RelatedI recently installed a NetGear router to my PC in order to do online gaming. Now my laptop does not connect to the internet. I have spent over 9 hours on the phone with Centurylink (the internet provider); Netgear (the router) and HP (the laptop). Each one says its not their problem. The laptop can find our connection, it says "Connected". However it then says "Internet access denied".
View 5 Replies View RelatedUnable to connect to the internet thru router.
Hardware:
Motorola Modem
Netgear N-300 WNR2000v3 router
Dell Vostro 470
Tried numerous times but no Internet connection between Directv hr23-700 and Netgear DSL 7550 modem/router. Is connected to home network, but no Internet.
View 1 Replies View RelatedUnderstand they are using dfferent cat cable. Does Cisco equipment nromally all are 1000-T, how to check they are 1000-T or 1000-Tx, does cat 5 with 4 pairs already support GE speed.
View 2 Replies View Relatedi have cisco Router ASR 1000 .. i configure it ... i need to connect using PPPOE through gigaethernet ....the error 720 appear to me so where the problem ?????????
Router#show running-config
Building configuration...
Current configuration : 1867 bytes
!
! Last configuration change at 11:18:31 UTC Sun Jan 30 2011
!
version 12.2
[code].....
I have a functioning wireless network at home, but I can't get my computer to connect to the internet. I bought a new wireless usb adaptor (Netgear N-150, WNA1100VC) and tried to install it. The computer at first connected to the internet, but the next day it did not. I unistalled the software and tried to reinstall it, but I got an error message saying the driver was not digitally signed and I should contact the provider. I have done this, and Netgear have given me instructions on how to fix. The problem is that now when I packed up my computer and re-assembled so I can plug the ethernet cable directly into it, I still can't connect to the internet.I get a message saying I'm connected to the wireless network, but can't connect to the internet.When I click on the "Diagonose Problem" it says the following:Windows Network Diagnostics Window.There might be a problem with one or more network adaptors on this computer
1. The network adaptor "Realtek RTL8168C (P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)" is experiencing driver or hardware related issues
2. Make sure your internet protocol bindings are correct - Ensure that "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" are selected in the configuration for the network adaptor "Local Area Connection"[code]
there are 2 pcs with 1000meter (1KM) distance. can we connect them with Single Mode Fiber and RJ45 connector? I'm sure that Single Mode fibers can handle such a length, but what about the RJ45?
View 4 Replies View RelatedMy only issue at the moment and im not sure if im doing something wrong but the wireless card is Intel® Centrino® Wireless-N 1000 and it says it can do Wireless N Connection but im not able to get it connected to the wireless N network. When i go in to view the options it gives for Wireless Mode it says B/G or just B or G. Now up top it does say 802.11N Mode and has the option for Enable and Disable and its Enabled. I have uninstalled the driver and intel software and reinstall everything a few times but no resolve. How i need to get the card to connect to the N Network?
View 5 Replies View RelatedIn Room 1 Computer 1 and computer 2 are connected to the Verizon box via ethernet cables using port LAN 1 & LAN 2.In Room 2 I have Computer 3 connected to the Verizon box using Wireless I then added a ethernet cable into Computer 3 that goes into a Netgear box the ethernet cable goes into the Internet port I then run a ethernet cable into port 1 in the netgear box into the Xbox 360 and on computer 3 I bridge the wireless and LAN connection this then lights up the netgear box showing Internet and Gives the Xbox internet connection but Computer 3 shows and will not connection to the internet just that it is on the LAN network.
View 6 Replies View RelatedI bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]
There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]
I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.
Im really sure the extender is in the range of my actual router!
I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies View RelatedIf set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
View 11 Replies View RelatedI have a dell vostro 1000 laptop. I upgraded my pc from xp to vista ultimate and lost wifi and internet connections. I really could use some help in trying to get my connections back. I hope I don't have to buy another wireless card.
View 1 Replies View Relatedwhen i click on connect to network nothing happens. it doesn't do anything, but if i plug in my old router it will connect just fine. It's just the new router
View 1 Replies View Relatedi have two computers in my house, the main one is connected to the internet with a Netgear N600 router. Computer 2 connects to that connection wirlessly with a D-link adapter.However after i reinstalled the OS to the main one, computer 2 suddenly is unable to even see the connection. i checked my smartphone which also used to connect when i was home and that can't see the connection either.
View 1 Replies View Related