i have cisco Router ASR 1000 .. i configure it ... i need to connect using PPPOE through gigaethernet ....the error 720 appear to me so where the problem ?????????
Router#show running-config
Building configuration...
Current configuration : 1867 bytes
!
! Last configuration change at 11:18:31 UTC Sun Jan 30 2011
!
version 12.2
[code].....
Understand they are using dfferent cat cable. Does Cisco equipment nromally all are 1000-T, how to check they are 1000-T or 1000-Tx, does cat 5 with 4 pairs already support GE speed.
View 2 Replies View RelatedThe internet is working fine though when i bypass the router and go straight through my modem
View 1 Replies View RelatedI have an HP Pavilion TX-1000 Entertainment PC that is really frustrating me. It will not connect to my wireless router. I have had this laptop for at least 3 years and it connects to any other wireless connection I've ever tried ( at my sons with Cox, every airport, overseas, and with my previous Qwest routers ). Since I moved and now have a Qwest PK5000Z router this laptop will not connect. The error message I get is " The network security key is incorrect ", but it's not of course. All other laptops I've used here connect successfully, Dell, Mac, Toshiba, etc.
View 1 Replies View RelatedI am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 Replies View RelatedI've had my Vostro 1000 Laptop for almost a year now. I had to reload the O/S. I put all the CDs in and downloaded all the drives, but now I don't show the WLAN card/connection.. nothing.
I can't connect to the internet and when Iook at the network adapters it only shoes the Broadcom 440x 10/100 intergrated controller.. My modem is only showing Conexant HDA D330 MDC v.92 modem.
I had the internal wireless with my laptop when it was given to me as a gift... and have been able to connect via wifi, etc.. but since reloading the O/S and all drivers, etc.. I don't have internet? Can't find this wireless connection?
there are 2 pcs with 1000meter (1KM) distance. can we connect them with Single Mode Fiber and RJ45 connector? I'm sure that Single Mode fibers can handle such a length, but what about the RJ45?
View 4 Replies View RelatedMy only issue at the moment and im not sure if im doing something wrong but the wireless card is Intel® Centrino® Wireless-N 1000 and it says it can do Wireless N Connection but im not able to get it connected to the wireless N network. When i go in to view the options it gives for Wireless Mode it says B/G or just B or G. Now up top it does say 802.11N Mode and has the option for Enable and Disable and its Enabled. I have uninstalled the driver and intel software and reinstall everything a few times but no resolve. How i need to get the card to connect to the N Network?
View 5 Replies View RelatedI also am using a Dell Inspiron N5010 with Windows 7 and have trouble connecting to Netgear WNR 1000. I have an Apple that has no trouble making that connection. I have spent over $100 to a local computer repair company trying unsuccessfully trying to fix the problem and $129 to Dell Technical Services with equal lack of success and then was told by a technical support person that they had fixed it, that they would not provide futher work to fix it. The fact is that the error occurred again immediately the moment the Dell technician hung up. I spent the following day just running internet on a cable connection for about 8 hoooting.ble shurs trouble free and then switched it to wireless, which failed in about 10 minutes as my own troubleshooting. This made it clear to me that the problem was only in the wireless connection.
They problem is the Blue Screen error time message that pops up at random times any time the computer is operating on wireless. At other timerred again immediatelyre occuthe failuat s it operates normally. The Blue screen error causes the computer to shut down and restart. The only solution I have found is to return the Netgear router to the store where I bought it (within 30 days of purchase) and pay the additional cost of a different router.
Service personell should at least be kept aware or incompatibilites, explained or unexplained, between particular router models and particular computer models so as to save this waste of time and money. I have lost about 3 weeks of useful time on this computer in addition to over $200 in direct costs attempting to find a fix.
I have a ZyXel P-660R-D1 DSL modem, and lately I've been experiencing random outages. I'm not super knowledgeable when it comes to the technical side of networking, but I know enough to look around the modems GUI and recognize when something isn't right. I'm pretty sure this is not a problem on my end, but I'd like to hear a few other peoples opinions. Basically I have four lights on the modem: Power, Ethernet, DSL, and Internet. DSL is the light that indicates connection to the PPPoE server, and lately it will just randomly drop. I've never experienced problems connecting with the PPPoE server until just recently. Every once in a while my Internet light will drop, and a simple reset will take care of it, but rarely am I ever not connected to the PPPoE server. One day it was down for three or so hours, one day for nine, another day it cut in and out for about four hours, and today was another nine hour day. how it works is that my username and password are verified through the ISPs PPPoE server, and then I am granted access to the web. I'm lead to believe that it's nothing on my end because all troubleshooting methods fail, it just randomly fixes itself several hours later. The first nine hour stretch I experienced I thought may have been because of maintenance or some other unforeseen circumstance, but it has happened a few times now so I'm not too sure. My provider, Earthlink, hasn't listed any 'Known Outages' on their site, but then again they never do.
View 1 Replies View RelatedTwo days ago our desktop computer stop having internet access. I called my ISP about this problem and they said that everything was fine with my router and that it might be a bad cable. I bought a new cable and it wasn't the cable. I called my dad's friend who works with computers and he said that he thought the NIC was bad. So we went to Staples and bought a Gigabit Ethernet PCI Adaptor, because that would fix the problem, well i installed all of the software and it didn't and we're stumped on what to do.
Our laptop still gets wifi however when I try to connect on my desktop it says that it can't connect through the WAN miniport PPPOE. It gives me error 815
The RV180W would not connect to an AT&T DSL connection using PPPoE (modem in bridge mode), or behind the DSL Modem/router with the DSL modem/router providing a dynamic IP to the RV180W or a cable modem (TimeWarner Roadrunner dynamic IP). I upgraded the firmware yesterday and now the RV180W will connect to a dynamic WAN IP, but it still will not connect using PPPoE.
I have also noticed the admin interface is only accessible about 75% of the time. When going to 192.168.1.1 the login prompts either don't come up or if they do, after logging in, the screen never fully loads after that. I have to reboot the router to get it to work.
Also, the router has not yet pulled DNS from either the DSL or the cable modem. I had to manually enter those addresses.
I have a Broadband Optical fibre cable which i used to connect directly to my Desktop and Laptop, i am running win7 on on my desktop/laptop, yesterday I installed Belkin router for my Laptop, worked fine, laptop is wireless now. But when I connected the desktop directly there is an error "670 cannot connect to the server/ cannot find the modem" I deleted the dialup and created new one still the same issue. However If i connect the cable through the Router to the desktop it works. I think I lost the direct connection.
View 2 Replies View RelatedI have a static IP at home and i have setup my Westell DSL modem to bridge - like the ISP told me too. Then i change my 655 to PPPoE username and password, but when i give it the static IP, it won't connect. But when i change it to DHCP, it connects. Is this a Router issue, or a ISP issue. I am leaning toward ISP, but i wanted to check with DLink first.
View 12 Replies View Relatedi have a Dlink DSL-2730U (an expensive, el cheapo router devoid of any functionalities, which also offers a way to connect to net as a side feature).basically i need to disconnect / reconnct pppoe without rebooting the router. but theres no button on the wan page for doing so.i noticed clicking on most of the buttons redirect to some non-html urls, like .cmd, .cgi etc, and some of them are common for many routers. e.g. on my router, "reboot" takes me to
[url]...
I've been using my EA4500 since it's original launch date as a PPPoE router through another router/modem which is the Netgear DG834G V4 set to Modem Only mode which was working fine for a long time!A month ago, a friend wanted to borrow the Netgear Router and after he gave it back I reset it like I always do and entered my settings in router mode(i.e. username and password) to check if I havewe working Internet connection and that the router is working properly and it was working properly like it was before I lent it. Now comes the problem, if I keep using the Netgear router as the PPPoE handler and make the EA4500 work as "Automatic Configuration DHCP" it works flawlessly but if I set the Netgear router to modem mode and make the EA4500 handle the PPPoE connection, the report in the troubleshooting tab keeps on saying "Connecting" endlessly!
Note: I've replicatedthe settings that I used on both router before and after lending it to my friend so there's no difference in settings!
When my RV220W used firmware 1.0.0.26 the PPPoE login to AT&T/Bellsouth DSL worked just fine. I upgraded to version 1.0.1.0 and now it won't connect. The PPPoE connection still works from my prior Linksys router so there wasn't a change on the ISP side. Has something changed in firmware 1.0.1.0 that requires a change to the PPPoE profile?
DSL Modem is a Motorola Netopia (model 2210-02) with firmware 7.7.3r10 operating in Bridged mode.
We have WLC-4402 and LWAP-1510, we have issue when users trying to connect to pppoe server with pppoe connection from wireless network. On LAN, pppoe connection work properly and everything is normal. Also I enable broadcast fowarding on GUI but he problem still exist.
View 1 Replies View RelatedWhen the ethernet cable is plugged directly into my laptop i can input my user name and password and connect directly without a problem. But as soon as i plug the cable into the router, the activity lights turn off like its not plugged in on the other end...which it is. So when going through the setup process, both using the cd and inputting the information on the web based setup. It does nothing, the automatic setup says the cable isnt plugged in. When using the browser setup i can click connect as many times as i want and it does nothing but say disconnected.
View 9 Replies View RelatedI am using wrt54gx4. I have a IP camera connected to it. I can view the live images on the intranet and internet. Not too long ago my DSL company upgraded my DSL modem to a newer model. Then I can not connect to the internet by PPPoe. DHCP is fine. So the only connection type works is DHCP. But now I can not view the live images on the internet. I can only view the live images on intranet( I mean if I open web browser and type url.. is the port, I can view the live image).
View 1 Replies View RelatedI am trying to connect to the internet using the PPPoE feature of the router but the router configuration is not successful. Says something like "WAN connection not successful". I have supplied the correct username and password. The connection is ok in my laptop if i directly connect my laptop to the Ethernet port of the modem without the router. Is this a sharing problem from the ISP?
View 10 Replies View RelatedI recently changed my internet connection to DSL from Cable, so now I'm using PPPoE type of connection.
Right now my router is configured as Automatic DHCP with the modem doing the PPPoE connection. All is fine and well.
Since I own a PS3, and Nat Type 3 conection is really bad for my online gaming, I would like to bridge my modem and connect to the internet through my router. That way I can properly forward my ports, use QoS and effectively get a better connection on the PS3.
I was able to successfully bridge the modem, but the PPPoE config on the router isn't able to connect to the internet.
Modem and router have been reinitialized after the configurations were changed. I do have the username and passwords, and they were properly put on the router.
I have rather huge connection at home. DL speed 80Mb, UL speed 3Mb.When I connect my PC directly to modem and configure PPPoE connection, I get 81Mbits/sec. When I connect my old ASMAX $30 router, I get 78 Mbit/sek. And I find it OK.But when I connect my EA6500 I get 28 MBits/sec. Same result on wire as on wireless connection. Of course If I enable prioritisation, I get even less, 12-15 Mbits/sec.I tried already even configuration with ASMAX as wired router and EA6500 connected to its LAN port. It gives me 50Mbits/sec.
View 5 Replies View RelatedI've recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?
3 months ago, we upgraded two ASR-100 shelves from IOS-XE "asr1000rp1-adventerprisek9.02.05.00.122-33.XNE.bin" to "asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin".Prior to the actual IOS upgrade, we had to upgrade the ROM with this package: "asr1000-rommon.150-1r.S.pkg"We now have two more ASR shelves to upgrade but I have 2 concerns and I couldn't find any answer to them:
1) Can I just use the same upgrade procedure for ASR-1000 and ASR-1002F shelves?
2) I could not find the detailed explanations of the "show platform" command output... And I'm afraid we did something wrong with our two first upgrades since I do no have 15.0(1)S mentioned in the three last lines of the output (0, R0,F0)?
ASR #sh ver
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.0(1)S, RELEASE SOFTWARE (fc1)
(…)
System imae file is "bootflash:asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin"
ASR#sh platform Chassis type: ASR1002
[code].....
Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View RelatedDo you know if cisco has release new version that fixed COMP-LZS feature on ASR 1000 series ? or any ETA on that ?
View 2 Replies View RelatedDoes the ASR-1000 accept an HWIC module, or must one go to a SIP/SPA for all modules?
View 1 Replies View RelatedI configured the logging parameters on my Cisco asr 1000 , but nothing was sent to my terminal monitor
logging on
logging buffered debugging
logging buffered 5
[Code].....
For ASR1000 to support 4M routes, RP2 must be used.
1) RP2 need to have 16GB memory in order to support 4M routes?
2) Need to use ESP20/40 together with RP2?
3) If RP2 + ESP10, supporting route table size down to 1M?
4) 4M routes is shared for both IPv4 an IPv6?
5) SIP card will affect route table size?
I use one PA-2H on my 7206vxr to connect 2 T3 lease line,Due to the performance issue,I plan to replace my Cisco 7206VXR to ASR 1006, When I check the interface option for asr 1000 series router,I don't find the HSSI SPA for ASR Series Router.Does it mean ASR don't support HSSI(T3)? or other SPA can use with my T3 lease line.
View 3 Replies View RelatedI have ASA 5510 with 8.4 connected to ISG 1000, when traffic is passing the VPN tunnel is working fine, when the traffic stops, ASA will drop the packet but the VPN tunnel on ISG still up .When new traffic started from ISG side, it will drop, as the tunnel is not up on ASA side.
View 2 Replies View RelatedI came up with a few ideas to Load Balance based on multiple ISPs. In our network setup we have a distribution layer of 3750s going to an ASR 1000 Series Router, which goes out to multiple ISPs, ISP1 and ISP2.
we also have a virtual fortinet appliance behind the 3750. If I say all traffic going to 0 - 126 goto ISP1, and 128 - 254 goto ISP2,and then obviously whatever NATd IP the customer has (ISP1 or ISP2), the return traffic will have to go to that specific IP. The traffic will allgo back to the virtual fortinet on the same interface, so I would assume I would be safe with uPF.I don't know of any ways to load balance based on Link Optimization, without implementing a load balancer?