Broadband :: Connect To Internet Using PPPoE Feature Of Router / Configuration Is Not Successful
Feb 4, 2013
I am trying to connect to the internet using the PPPoE feature of the router but the router configuration is not successful. Says something like "WAN connection not successful". I have supplied the correct username and password. The connection is ok in my laptop if i directly connect my laptop to the Ethernet port of the modem without the router. Is this a sharing problem from the ISP?
View 10 Replies
ADVERTISEMENT
Oct 24, 2011
I've recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
Â
The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?
View 3 Replies
View Related
Feb 18, 2012
I am using wrt54gx4. I have a IP camera connected to it. I can view the live images on the intranet and internet. Not too long ago my DSL company upgraded my DSL modem to a newer model. Then I can not connect to the internet by PPPoe. DHCP is fine. So the only connection type works is DHCP. But now I can not view the live images on the internet. I can only view the live images on intranet( I mean if I open web browser and type url.. is the port, I can view the live image).
View 1 Replies
View Related
Dec 6, 2011
I recently changed my internet connection to DSL from Cable, so now I'm using PPPoE type of connection.
Â
Right now my router is configured as Automatic DHCP with the modem doing the PPPoE connection. All is fine and well.
Â
Since I own a PS3, and Nat Type 3 conection is really bad for my online gaming, I would like to bridge my modem and connect to the internet through my router. That way I can properly forward my ports, use QoS and effectively get a better connection on the PS3.
Â
I was able to successfully bridge the modem, but the PPPoE config on the router isn't able to connect to the internet.
Â
Modem and router have been reinitialized after the configurations were changed. I do have the username and passwords, and they were properly put on the router.
View 1 Replies
View Related
Jul 14, 2011
I cant access internet but the connection is successful
View 1 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : mr3040v2_en_3_14_4_up_boot(121017)
ISP : Railwire
I have an broadband connection which does not need a modem to access, i get the CAT5 inthernet cable from the provider. In case if i use it directly on my PCall i have to do is provide username and password under PPPoE and internet works like a breeze.
Now i try to use this 3040 device to use as an wireless router so that i can access internet on multiple devices. How to configure this. I tried in all the three switch options provided with no result at all..I am now using a traditional router from which i connect to Tplink 3g router and using wireless under Access point option...But i would like to use it directly as i can get battery back up so that even when there is no power i can still browse?
View 2 Replies
View Related
Apr 8, 2012
i have a Dlink DSL-2730U (an expensive, el cheapo router devoid of any functionalities, which also offers a way to connect to net as a side feature).basically i need to disconnect / reconnct pppoe without rebooting the router. but theres no button on the wan page for doing so.i noticed clicking on most of the buttons redirect to some non-html urls, like .cmd, .cgi etc, and some of them are common for many routers. e.g. on my router, "reboot" takes me to
[url]...
View 18 Replies
View Related
Mar 19, 2012
I have recently gotten a cisco 1941 router running version 15.1(3)T, and am trying to configure the router as a PPPoE server for access via a vlan on one of the gigabit ethernet ports.I currently have a cisco 2620 router (version 11.3(2)XA4) with the following relevant configurations:
Â
vpdn enable
vpdn multihop
vpdn domain-delimiter @ suffix
!
vpdn-group pppoe
[code]....
Â
I am trying to duplicate this (all but IP addresses) on the new router, but there are some options that do not seem to exist in this particular software/hardware combination. Specifically,
Â
vpdn-group pppoe
accept-dialin
 protocol pppoe
Â
does not accept "pppoe" as a protocol, only allowing l2tp. What has changed, and what the proper configuration is.
View 1 Replies
View Related
Jun 20, 2012
I'm trying to get a PPPoE config working on an 1841. Running c1841-advsecurityk9-mz.124-3i.bin . I tried c1841-advsecurityk9-mz.151-4.M4.bin but it has even less protocol options.
Â
I used a walkthrough but it suggests the following fragment which doesn't work because there is no "protocol ppoe" command available on my system. Perhaps there is a simpler way to do this? I tried c1841-broadband-mz.151-4.M4.bin but it doesn't seem to have ssh available.
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
exit
[Code]...
View 3 Replies
View Related
Nov 17, 2012
I've been using my EA4500 since it's original launch date as a PPPoE router through another router/modem which is the Netgear DG834G V4 set to Modem Only mode which was working fine for a long time!A month ago, a friend wanted to borrow the Netgear Router and after he gave it back I reset it like I always do and entered my settings in router mode(i.e. username and password) to check if I havewe working Internet connection and that the router is working properly and it was working properly like it was before I lent it. Now comes the problem, if I keep using the Netgear router as the PPPoE handler and make the EA4500 work as "Automatic Configuration DHCP" it works flawlessly but if I set the Netgear router to modem mode and make the EA4500 handle the PPPoE connection, the report in the troubleshooting tab keeps on saying "Connecting" endlessly!
Â
Note: I've replicatedthe settings that I used on both router before and after lending it to my friend so there's no difference in settings!
View 6 Replies
View Related
Nov 18, 2012
I have a laptop and a computer. The laptop works fine and so does the computer. My computer says I'm connected to the internet, But Whenever I try to get on the internet (GoogleChrome, Mozzila Firefox, Internet Explorer) It says I'm not connected to the internet. And I checked everything and it says I'm connected. I just can't get on the internet pages. Not even messenger.
View 1 Replies
View Related
Jul 14, 2011
I recently reformatted and restored the original os on my Gateway MX6920 which is windows xp media center edition. Before and after restoring the original os, however, I still have not been able to connect to the internet through the onboard lan that doesn't seem to be active or even be seen by the computer. How should I fix this? Is there a possibility that the internal lan was disabled mechanically? Or would I have to get a pci lan card? as I have been trying to get this computer to work properly for the last 4 weeks. Also, before I restored the os, I put a pci lan card in but it still would not recognize that there was an internet connection when I would connect it to an active ethernet connection. I'm worried that I still will not be able to connect when I get a new pci lan card because of unknown reasons that I have been trying to figure out for quite some time now.
View 2 Replies
View Related
Mar 4, 2012
I am trying to connect my laptop to the Internet and it isn't working. I have high speed broad band both modem and a nexxt router. My laptop does not recognize that there is a wireless network in the area. When I connect the cable directly from the router to my laptop jack it does not recognize it has an Internet connection. I have tried running windows network connection setup wizards but no luck. There is another computer on the network that connects with the Internet flawlessly. I also downloaded a new driver but that did not work. I have a windows seven 32 bit notepad.
View 1 Replies
View Related
Oct 24, 2012
When the ethernet cable is plugged directly into my laptop i can input my user name and password and connect directly without a problem. But as soon as i plug the cable into the router, the activity lights turn off like its not plugged in on the other end...which it is. So when going through the setup process, both using the cd and inputting the information on the web based setup. It does nothing, the automatic setup says the cable isnt plugged in. When using the browser setup i can click connect as many times as i want and it does nothing but say disconnected.
View 9 Replies
View Related
May 3, 2012
However I cannot connect to the internet, the following message appears. The system cannot up date the telephone book file error 624. I am not connected to a telephone line for my system, as I use a modem USB, which is working ok.
View 1 Replies
View Related
May 1, 2011
i have the internet connection but it wont connect. and theres no file button to select to click to work offline the whole page is blank
View 2 Replies
View Related
Sep 9, 2011
I cant connect to internet but other user can. We use the same laptop but my internet connection was cut off whereas my son's internet connection on the same computer is working fine. I have used cable as well with no success. Obviously there is nothing wrong with the router or cable or wireless but there must be something wrong with my user settings. My son is using the same computer and can connect fine to internet as another user.
View 2 Replies
View Related
Aug 15, 2011
diagnosis is indicating server is connected but internet is not connected
View 1 Replies
View Related
Jan 23, 2011
reloaded xp. dont seem to have internet drivers. down loaded new drivers and seem to do no good. still unable to connect to internet.
View 1 Replies
View Related
Jul 9, 2012
I've bought the EA4500 and configured it to connect to internet. it works fine.however, one day after it, it can't connect to the internet anymore. I go to the router setup page and try to manually connect it to the internet, but it keeps "connecting." I then restore to its factory configuration, then do the configuration again and it can successfully connect to the internet.however, one day after it, again, it can't connect to the internet anymore.
View 2 Replies
View Related
Jan 15, 2012
I have a problem with my Belkin router that is ruining any online gaming experience I want to have. Any time I try to play a game on my PC, I have to deal with STRICT NAT. On my router setup page I have all security features off, UPnP is enabled, and i'm pretty sure I have my computer in a DMZ. (As far as I know a DMZ'd computer should have an Open Nat right?)When I use run>cmd>ipconfig it says my ip address is 192.168.2.2, which is the same exact thing that is in my DMZ box, but it isn't appearing to work.Does anybody have an idea how to set up a successful DMZ on a belkin router?
View 4 Replies
View Related
Jan 22, 2011
My internet connect sometimes and other time is won't do nothing at all it picking up the network just won't pull up anything. I just flush my dns and still no luck.
View 1 Replies
View Related
Aug 8, 2012
A lightening strike hit us recently (last week) and fried electronics in the house. The next morning we didn't have internet on either our PC or Apple laptop. The modem wasn't doing its blinky green light dance. I used a multi-meter; the power supply was dead. I replaced it. It did its blinky dance. I turned everything on in order; turn everything off, turn the modem on and wait, turn the router on and wait, and turn on the PC and laptop. The good news was, the laptop got the internet, albeit much more slowly and intermittently than it used to. The PC got nothing. I've fumbled around with this for a week and can't fix it. I'm not sure if what's wrong is the router, modem, or something specific to the PC. Time Warner reported the internet is getting to my location (I called). They said the router was the problem and, consequently, not their problem. I tried connecting the laptop to the modem directly, leaving the router and PC unconnected. This works (I get the internet on the laptop, still). I tried connecting the PC to the modem and leaving the laptop and router unconnected. This *doesn't* work (I get no internet on the PC). Device manager shows that my ethernet card works. I tried sending a test packet to the modem. This also worked. Here's my ipconfig /all Microsoft Windows [Version 6.1.7600]
View 2 Replies
View Related
Oct 18, 2011
There are currently 6 laptops in my household.4 windows (1 vista, 1 xp2002 pro, 2 windows 7) and 2 linux (both ubuntu). Night before last, without warning, all 6 stopped connecting through the wireless router. I took the router out of the mix, and now only the linux laptops can connect to the internet via ethernet cable. comcast support is useless.any ideas what could be happening here? Only 1 of the linux and 2 of the windows laptops were connected at the time this occurred.
View 7 Replies
View Related
Jul 4, 2011
Ethernet driver or wireless undetected have a port to plug ethernet cord into on computer
View 1 Replies
View Related
Dec 28, 2011
It's not on one device, and it doesn't matter if you are connected wirelessly or by cable. It also doesn't matter what internet browser you use. I would guesstimate that every 5-15 mins the dsl broadband just gives and all internet goes down for probably 1-3 mins at a time.I honestly have no idea. I'm using a 2Wire, just what AT&T gave me. I'm guessing it's either the dsl filter, or the actually router itself, i'm just not sure how to go about troubleshooting and figuring out the root of the problem.
View 1 Replies
View Related
Jul 6, 2012
My xp laptop does not connect to the internet using USB broadband after deletion of the dns changer virus (although still shows a connection) , however still connects using LAN or wireless. The usb modem works on other xp computers.Tried ipconfig/dnsflush, cfs /runnow/ uninstall and reinstall modem and usb ports.
View 4 Replies
View Related
Jul 4, 2012
I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.
View 1 Replies
View Related
Nov 29, 2012
I recently buyed a Linksys EA6500 wireless router. I accessed [URL] to access the settings interface of the router. Went to "Connectivity Internet Settings" and chose type of the internet connection as PPPoE. Entered the username and password, clicked ok.
Â
No internet access.
View 9 Replies
View Related
Mar 8, 2013
I have rather huge connection at home. DL speed 80Mb, UL speed 3Mb.When I connect my PC directly to modem and configure PPPoE connection, I get 81Mbits/sec. When I connect my old ASMAX $30 router, I get 78 Mbit/sek. And I find it OK.But when I connect my EA6500 I get 28 MBits/sec. Same result on wire as on wireless connection. Of course If I enable prioritisation, I get even less, 12-15 Mbits/sec.I tried already even configuration with ASMAX as wired router and EA6500 connected to its LAN port. It gives me 50Mbits/sec.
View 5 Replies
View Related
Oct 24, 2011
I am using USB internet connection. I am trying to connect internet, it shows all the signal but connect button is grayed out.
View 1 Replies
View Related
Jul 1, 2011
I just need a usb dongle to connect my acer n30 handheld to my internet
View 2 Replies
View Related
May 24, 2012
Firefox, Safari, SeaMonkey nor Chrome can´t connect internet even I´ve got internet connection
View 5 Replies
View Related
