Cisco WAN :: HWIC-2FE Module In ASR-1000?
Nov 15, 2011Does the ASR-1000 accept an HWIC module, or must one go to a SIP/SPA for all modules?
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Prime Network Analysis Module On ASR 1000?
Jan 9, 2013just found that on [URL], it stated that Cisco ASR 1000's management tool is Cisco Prime Network Analysis Module, which is same name as software that can be install in SRE of Cisco ISR G2 router for network analysis via web browser.
My question here is this mean Cisco ASR 1000 has built-in support for Cisco Prime Network Analysis Module, which has similar function as the one on Cisco ISR G2 router's SRE?
Cisco WAN :: HWIC-4B-S/T Module Not Detected On 2811
Oct 26, 2011i am currently trying to configure a four port ISDN BRI interface on a Cisco 2811 router.Upon upgrading to a later version of IOS, c2800nm-advipservicesk9-mz.124-25d.bin, access to the HWIC-4B-S/T module is lost, the router no longer detects it. In fact iI can only get the router to detect the module using the original IOS version c2800nm-advipservicesk9-mz.124-20.YA3.bin.
Is there some special feature needed in the IOS code to support these modules, if so what would be a suitable version/train to upgrade to?I have tried using the Cisco Software advisor tool but it generates an error when searching on a hardware configuration containing this module type.
The reason for upgrading the code is we have a potential bug with the current version which appears to be preventing the BRI interface syncing up with the providers switch (switch type correctly defined and provider confirms isdn line has been provisioned correctly).
The debug error seen is:
GMT: ISDN BR0/0/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
My main question though is why the module is not being detected after a code upgrade and if there is a specific code version/train needed to support this module in a 2811?
Cisco LAN :: Difference Between 1000-T And 1000-Tx?
Aug 22, 2012Understand they are using dfferent cat cable. Does Cisco equipment nromally all are 1000-T, how to check they are 1000-T or 1000-Tx, does cat 5 with 4 pairs already support GE speed.
View 2 Replies View RelatedCisco WAN :: Difference Between HWIC-1ADSL-M And HWIC-1ADSL?
Jun 12, 2013What is the difference between HWIC-1ADSL-M and HWIC-1ADSL without the "-M"?Can either of the above ADSL cards be used in Cisco 3845 router? We are using HWIC-1ADSL-M in our Cisco 3845 routers everywhere?
View 1 Replies View RelatedCisco WAN :: ASR-1000 Upgrade (IOS-XE And ROM)?
Dec 12, 20103 months ago, we upgraded two ASR-100 shelves from IOS-XE "asr1000rp1-adventerprisek9.02.05.00.122-33.XNE.bin" to "asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin".Prior to the actual IOS upgrade, we had to upgrade the ROM with this package: "asr1000-rommon.150-1r.S.pkg"We now have two more ASR shelves to upgrade but I have 2 concerns and I couldn't find any answer to them:
1) Can I just use the same upgrade procedure for ASR-1000 and ASR-1002F shelves?
2) I could not find the detailed explanations of the "show platform" command output... And I'm afraid we did something wrong with our two first upgrades since I do no have 15.0(1)S mentioned in the three last lines of the output (0, R0,F0)?
ASR #sh ver
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.0(1)S, RELEASE SOFTWARE (fc1)
(…)
System imae file is "bootflash:asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin"
ASR#sh platform Chassis type: ASR1002
[code].....
Cisco WAN :: Upgrading ASR 1000 Out Of Box?
Dec 9, 2012Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View RelatedCisco VPN :: ASR 1000 LZS Compression?
Jun 21, 2010Do you know if cisco has release new version that fixed COMP-LZS feature on ASR 1000 series ? or any ETA on that ?
View 2 Replies View RelatedCisco WAN :: No Logging Events In ASR 1000
Apr 26, 2012I configured the logging parameters on my Cisco asr 1000 , but nothing was sent to my terminal monitor
logging on
logging buffered debugging
logging buffered 5
[Code].....
Cisco WAN :: ASR 1000 With 4M Routes Support
Jul 5, 2011For ASR1000 to support 4M routes, RP2 must be used.
1) RP2 need to have 16GB memory in order to support 4M routes?
2) Need to use ESP20/40 together with RP2?
3) If RP2 + ESP10, supporting route table size down to 1M?
4) 4M routes is shared for both IPv4 an IPv6?
5) SIP card will affect route table size?
Cisco WAN :: Does ASR 1000 Support HSSI Interface
Nov 27, 2012I use one PA-2H on my 7206vxr to connect 2 T3 lease line,Due to the performance issue,I plan to replace my Cisco 7206VXR to ASR 1006, When I check the interface option for asr 1000 series router,I don't find the HSSI SPA for ASR Series Router.Does it mean ASR don't support HSSI(T3)? or other SPA can use with my T3 lease line.
View 3 Replies View RelatedCisco VPN :: VPN To Juniper ISG 1000 Dropping Packets
Aug 1, 2012I have ASA 5510 with 8.4 connected to ISG 1000, when traffic is passing the VPN tunnel is working fine, when the traffic stops, ASA will drop the packet but the VPN tunnel on ISG still up .When new traffic started from ISG side, it will drop, as the tunnel is not up on ASA side.
View 2 Replies View RelatedCisco WAN :: ASR 1000 / How To Connect Using PPPOE Through Gigaethernet
Jan 29, 2011i have cisco Router ASR 1000 .. i configure it ... i need to connect using PPPOE through gigaethernet ....the error 720 appear to me so where the problem ?????????
Router#show running-config
Building configuration...
Current configuration : 1867 bytes
!
! Last configuration change at 11:18:31 UTC Sun Jan 30 2011
!
version 12.2
[code].....
Cisco WAN :: ASR 1000 Multiple ISP Load Balancing?
Nov 21, 2012I came up with a few ideas to Load Balance based on multiple ISPs. In our network setup we have a distribution layer of 3750s going to an ASR 1000 Series Router, which goes out to multiple ISPs, ISP1 and ISP2.
we also have a virtual fortinet appliance behind the 3750. If I say all traffic going to 0 - 126 goto ISP1, and 128 - 254 goto ISP2,and then obviously whatever NATd IP the customer has (ISP1 or ISP2), the return traffic will have to go to that specific IP. The traffic will allgo back to the virtual fortinet on the same interface, so I would assume I would be safe with uPF.I don't know of any ways to load balance based on Link Optimization, without implementing a load balancer?
Hp Pavillian Tx 1000 Can't Detect Any Wifi
Jul 26, 2012It just happen yesterday that my brother's laptop can not connect to Wi-Fi - it could not detect any wireless in the range while my macbook can still find many wireless around here. As usual , I will use window troubleshooting. However , this case , it could not identify any problem ; it said " troubleshooting can not identify problem ". My brother's computer run on Window 7 , Hp pavillian tx 1000.
View 8 Replies View RelatedLinksys E 1000 Won't Connect To The Internet At All?
Dec 25, 2011The internet is working fine though when i bypass the router and go straight through my modem
View 1 Replies View RelatedHP Pavilion TX 1000 Won't Connect To Internet?
Dec 18, 2011I have an HP Pavilion TX-1000 Entertainment PC that is really frustrating me. It will not connect to my wireless router. I have had this laptop for at least 3 years and it connects to any other wireless connection I've ever tried ( at my sons with Cox, every airport, overseas, and with my previous Qwest routers ). Since I moved and now have a Qwest PK5000Z router this laptop will not connect. The error message I get is " The network security key is incorrect ", but it's not of course. All other laptops I've used here connect successfully, Dell, Mac, Toshiba, etc.
View 1 Replies View RelatedRealtek Gigabyte Nic Running At 100 Not 1000
Oct 18, 2011I have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
Cisco WAN :: Powering Off ASR 1000 Series Router Safely?
Apr 16, 2012Does following link/procedure is valid for ASR1004 chassis (STEP4) and not just ASR1013 ?
[URL]
Cisco Security :: SCE 1000 - Fight SPAM In ISP Network
Nov 7, 2011I like to fight spam emanating from my network. How to do it and which equipement to use?I have an SCE 1000 series, i'll like to know if it can do the job.
View 1 Replies View RelatedCisco WAN :: 3750G-48TS Do Not Work At 1000 Kbits
Dec 13, 2010I have a stack composed by:
Switch Ports Model SW Version SW Image------ ----- ----- ---------- ----------* 1 52 WS-C3750G-48TS 12.2(35)SE5 C3750-IPBASE-M 2 52 WS-C3750-48TS 12.2(35)SE5 C3750-IPBASE-M
All works well, except for the client connected to the gigaethernet ports that do not works at 1000, I am sure that the clients are able to do it. I have done a check on one of 48 port:
SW3750_100_ced_rk0#sh int gigabitEthernet 1/0/24 capabilitiesGigabitEthernet1/0/24 Model: WS-C3750G-48TS Type: 10/100/1000BaseTX Speed: 10,100,1000,auto Duplex: half,full,auto Trunk encap. type: 802.1Q,ISL Trunk mode: on,off,desirable,nonegotiate Channel: yes Broadcast suppression: percentage(0-100) Flowcontrol: rx-(off,on,desired),tx-(none) Fast Start: yes QoS scheduling: rx-(not configurable on per port basis),tx-(4q2t) CoS rewrite: yes ToS rewrite: yes UDLD: yes Inline power: no SPAN: source/destination PortSecure: yes Dot1x: yes
Seems all ok but if I try to disable auto config about speed and duplex, and force it manually to 1000 full, I lost the client when i done it I forced the speed and the duplex to 1000 full on the client too.
Netgear WNR-1000 V3 New Router / Can Connect To LAN But Not Internet
Mar 11, 2011I am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 Replies View RelatedLinksys Wireless Router :: RE-1000 - Not Responding To URL
Sep 14, 2012MY RE-1000 is up and working at 192.168.1.141. But I get nothing back when I put this address into IE.
View 3 Replies View RelatedDell :: Vostro 1000 Can't Connect To Internet
Feb 22, 2009I've had my Vostro 1000 Laptop for almost a year now. I had to reload the O/S. I put all the CDs in and downloaded all the drives, but now I don't show the WLAN card/connection.. nothing.
I can't connect to the internet and when Iook at the network adapters it only shoes the Broadcom 440x 10/100 intergrated controller.. My modem is only showing Conexant HDA D330 MDC v.92 modem.
I had the internal wireless with my laptop when it was given to me as a gift... and have been able to connect via wifi, etc.. but since reloading the O/S and all drivers, etc.. I don't have internet? Can't find this wireless connection?
Netgear WNR 2000 / 1000 - Download Speed
Apr 10, 2011According to the Time Warner website, my Road Runner Turbo with Power boost is capable of download speeds up to 15 Mbps, which seems to be far surpassed by all wireless routers. So what are the benefits of routers such as the Netgear WNR2000 and beyond with speeds up to 300 Mbps vs the Netgear WNR1000 with speeds up to 150 Mbps?
I'm more than willing to spend more for increased performance, but don't fully understand what benefits I'll see by dropping more than about $40 on something like the WNR1000.By the way, I'm in a two bedroom apartment and regularly have two laptops, a PS3, and Droid X connected to the internet.
XFX 750I - Get 1000 Mbps Gigabit Network?
Jul 17, 2012I'm using an XFX 750I motherboard and a D-link DWR-112 router to connect to my network. It is showing that it's using 100 Mbps when connected through above mentioned motherboard's Ethernet port. Can I get 1000 Mbps i.e. 1 Gbps networking speed in my local area network?
View 3 Replies View RelatedIntel GT 1000 NIC / XP Pro SP3 PC - Driver Update Fail
Nov 12, 2011I have an Intel GT 1000 NIC installed in my XP Pro SP3 PC.I downloaded the driver update file for this NIC: "PROWin32.exe", version 16.6, dated 9/30/2011 for Windows XP 32 bit.The install failed with the following error message: I emailed these details to Intel Tech Support but have not yet heard back from them.
I searched my PC for "VC90_CRT_x86" and found it in many *.cab files but not as a single file anywhere else on my computer. How to get the new driver to install? I'm using the GT 1000 because the Realtek NIC that is on my MOBO failed a couple of years ago.
Cisco :: CASR 1000 And ASR 9000 To Remove Alarms For These Equipments
Oct 12, 2011I have many alarms with CWLMS 4.0. The alarms are OutOf Range Voltage, OutOfRange Temperature and OutOfRange Memory. I don´t know how eliminate this alarms for these equipaments. I am trying with Setting up the thresholds but nothing.
View 3 Replies View RelatedCisco Firewall :: ASR 1000 ZBF Can Use Police Action In An Inspect Rule
Mar 23, 2011I have two questions about ZBF on ASR1000 with Firewall and Flexible Packet Inspection license:
1 is IPv6 supported?
2 can I use police action in an inspect rule? I want to limit some protocols to low bandwidth. There is no police command in ZBF policy map.
Cisco WAN :: Duplex Setting On WAN Interface On ASR 1000 Series Router
Apr 13, 2013I have autonegotiation disable on my interfcae what should be duplex setting on other end?
Router#sh run int Gi0/3/0
Building configuration...
Current configuration : 334 bytes(code)
Cisco VPN :: ASA5540 / 1000 Webvpn Users With Secure Desktop?
Jan 24, 2012My customer has 1000 SSL VPN users license on ASA5540 and i want to know the impact of deploying secure desktop on the ASA resources "processor , memory ... etc)
View 1 Replies View RelatedCisco Firewall :: ASA 5520 Can't Ping Bigger Than 1000 Byte
Sep 28, 2011I have a cisco asa 5520 version 8.2.
I found big problem with ping. I can't ping any internet ip with packet size bigger than 990.
I checked runing again. I see config every thing fine. I can't ping bigger than 990 byte.
C:Usersuaydinli>ping 172.17.97.2 -l 1000
Pinging 172.17.97.2 with 1000 bytes of data:
Request timed out.
Request timed out.
[Code]......
Cisco WAN :: Does ASR 1000 Series Support DMVPN Hub And Key Server In GetVPN
May 12, 2009Does ASR 1000 Series support DMVPN Hub, and Key Server in GETVPN.
View 2 Replies View Related
