Cannot Connect To Internet Have A Netgear DGN2000 Modem-router?
Feb 23, 2011
Cannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies
ADVERTISEMENT
Oct 14, 2011
I have a Dell XPS 430 desktop and a Netgear DGN2000 modem/router. My ISP is Zen. The router is connected to the PC by an ethernet cable.I have had no problems accessing the internet for years until a couple of days ago when the monitors on the info bar show a triangle with a yellow exclamation mark. The Windows Diagnose and Repair reports - Error 815. The Broadband Network Connection could not be established because the remote server is not responding.My laptop with a wireless connection to the router as no problem connecting so I assume the router is OK.
View 9 Replies
View Related
Oct 18, 2012
I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
View 4 Replies
View Related
Jun 7, 2012
Tried numerous times but no Internet connection between Directv hr23-700 and Netgear DSL 7550 modem/router. Is connected to home network, but no Internet.
View 1 Replies
View Related
Aug 29, 2011
I have a Netgear DGN2000 which I use as my main router/modem. This is ADSL and works perfectly.I have added a Belkin F5Z0102 UK G Wireless ADSL Modem Router as a wireless range extender.It is connected to the Netgear via homeplug and works fine for connecting to the internet on all my gadgetry (ie internet radio, netbooks and mobile phone) via wireless and wired.My problem is when the internet radio and music player on my phone try to connect to the NAS, connected via ethernet cable to the Netgear router.I can connect to the NAS via it's IP address directly but it will not be recognised by the software on the radio or phone.However,if I connect to the Netgear router (first), it recognises it straight away.
To allow access, do I need to change the settings of the router to point to the other router in any particular way?I have specified the second router as 192.168.0.2 and this points back to the Netgear router in the settings. The SSID is different to the first because if I put it as the same, the router gets confused and I lose all connectivity. I have also disabled the DHCP settings ont he second router. Forgot to mention that it is set up as a 1483 Bridge.
View 2 Replies
View Related
Dec 21, 2012
I am having trouble with my wireless internet at home, i am using a dell inspirion with windows 7, and an ipad, my router is a Netgear DGN2000, what happens is that the connection is intermittent on all the devices when using the wireless connection but no problem when using a direct connection.
These are the spec when it is working:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ericise
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No[code].....
View 1 Replies
View Related
Jan 8, 2011
I have a Netgear DGN2000 router wired to a desktop machine running windows 7. In another room i have another desktop machine running windows XP. I have a netgear WN111v2 network adapter connected to this machine. The network adapter says it is connect to the router, the icon in the bottom right hand corner is green and the signal strength is in high 90%s, yet when i start up internet explorer the message i get is "Internet Explorer cannot display the webpage".
Also, in the house there is a laptop running windows 7 (connected wirelessly - no problems) another laptop running windows xp (connected - no problems) and an Xbox 360 (connected ok). Been on to netgear tech support all they could suggest was to lower the security settings on the router, ultimately lowered down to disabled - still nothing. Disabled homegroup on the windows 7 machine still nothing running out of ideas now.
View 14 Replies
View Related
Dec 11, 2012
How do you connect a usb modem to a wireless router?
View 1 Replies
View Related
Feb 15, 2012
I hav a laptop conecteted to the internet with comcast service and a netgear wireless router that works fine. but bought a desktop and when i hook it to the router i get no internet. im running windows 7 ultimate on both machines. i am gettin a thing saying unidentified network in my network settings and i called comcast whent through resetting the modem and router with them and nothing then they tell me i have to pay them to run another machine of of my router this is ridiculas i have the machine pluged into the port on the router with anethernet cable everything is hooked up right i know this im pretty computer savy as ive built many machines in the past.
View 1 Replies
View Related
Mar 23, 2011
Every day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
View 1 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Aug 26, 2011
I have Windows 7 64 bit.I bought a Netgear DGN2000 approximately two years ago. It is working well.Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).I worked on my desktop this morning, uninstalled some programmed, but must have uninstalled a driver or something.I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point.If I troubleshoot, it states “Windows do not detect a properly installed network adaptor.
View 3 Replies
View Related
Jun 24, 2012
I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.
View 7 Replies
View Related
Sep 10, 2011
I have a Magnavox Blu-Ray player, model MBP5130/F7. I leep getting the DHcP cannot be acquired.
View 4 Replies
View Related
Jul 22, 2012
Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect.I am able to follow step-by-steps to resolve this
View 14 Replies
View Related
Mar 11, 2011
I am running Windows Vista and we recently got a new wireless router to work with our Blu-Ray player. The desktop works, but not the laptop. I can connect to the local network, but not the internet. The laptop worked before we got the new router, and it works on another network. Our new router is a Netgear WNR-1000 v3. I get a response when I ping 127.0.0.1.
View 11 Replies
View Related
Sep 7, 2012
I cant get this to work and maybe it's not possible to even do it. I have 2 laptops one old running XP and one new running 7. I have DSL Sprint modem that works fine when directly wired to either laptop. A friend gave me an old Netgear Wrt54g wireless router he had laying around so I could connect both laptops to the internet. I cannot do this wired or wireless. When I try wired the internet doesn't work. When I try to do it via wireless the new Windows 7 laptop says it isn't compatible. Any way to get this to work either way on both? Or do I need to pick up a new router. Also, I would prefer a wired connection so any recommendations for a wired router that will work with this setup.
View 2 Replies
View Related
Feb 3, 2013
Buffalo Linkstation HD-H250LAN and Netgear N300 DGN2200v3 ADSL2 Modem Router.
3 PCs connect without a problem, 2 wireless and 1 wired, but cannot get it to recognise the Buffalo Linkstation. Netgear uses 192.168.0.1. but Belkin used 192.168.2.etc.
Linkstation setup says Linkstation not connected, but it is.
View 3 Replies
View Related
Mar 21, 2011
My laptops internet runs super slow, but only at our house.It runs at top speed on any other network. My wifes laptop has no issues at all. Have done multiple virus check with multiple different anti virisus programs.We use a Netgear modem I usually connect wireless, but have connected with an Ethernet cord with no change in speed.
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4063 Mb
Graphics Card: ATI Mobility Radeon HD 4650, 1024 Mb
Hard Drives: C: Total - 463711 MB, Free - 389512 MB; D: Total - 13026 MB, Free - 2178 MB;
Motherboard: Quanta, 3628, 18.42, CNF9401DLR
Antivirus: AVG Internet Security, Updated and Enabled
View 3 Replies
View Related
Mar 29, 2011
I have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies
View Related
Feb 27, 2012
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies
View Related
Sep 16, 2011
I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies
View Related
Feb 27, 2012
i have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Feb 27, 2011
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies
View Related
Mar 2, 2011
I recently installed a NetGear router to my PC in order to do online gaming. Now my laptop does not connect to the internet. I have spent over 9 hours on the phone with Centurylink (the internet provider); Netgear (the router) and HP (the laptop). Each one says its not their problem. The laptop can find our connection, it says "Connected". However it then says "Internet access denied".
View 5 Replies
View Related
Jan 24, 2013
Unable to connect to the internet thru router.
Hardware:
Motorola Modem
Netgear N-300 WNR2000v3 router
Dell Vostro 470
View 8 Replies
View Related
Sep 12, 2011
For several years I was connected to the internet via a USB modem (with TalkTalk being my ISP), however, after purchasing a laptop with Wi-Fi for my partner's daughter, decided it was time to get a router so we could all use the internet.I purchased a Netgear N150 Wireless ADSL2+ Modem Router, model DGN1000, connected (via ethernet as the desktop has no wireless receiver) and installed it as per instructions supplied.However since that point I have been unable to connect to the internet on my desktop through the router. Wireless devices (several laptops, iPhones and games consoles) have no issues whatsoever in connecting and using the internet.
At first the desktop kept saying that I had "limited or no connectivity" which I eventually sorted out, there was some kind of issue with my IP address, but I can't remember what now. Now I when I try to load any website, Internet explorer tells me it couldn't load the page due to .... Google Chrome is more specific and tells me that the DNS lookup failed. I have tried updating the ethernet controller driver, using the 'flushdns' command, and after discovering many other people on TalkTalk tech forums having similar DNS issues, tried using DNS addresses that were suggested by both their support staff and members of the public (i.e. Google's DNS 8.8.8.8), and still nothing. If I reconnect my USB modem I can connect to the internet no problem, but I'd prefer to only have one modem on the go.I am running a HP Pavilion with Win XP (SP2), and all the laptops that have connected wirelessly (including the one I'm using now) are running Vista.
View 8 Replies
View Related
May 20, 2012
Last night Comcast reset our modem (from afar) so we could get a free movie to work. After that, we got the movie but my wireless internet now does not work. I can connect when attached to the cable modem but when I plug into the router I don't have access to internet.The router is plugged in and all lights are working (it acts normally otherwise). Also, our landline phone (which is in the bundle of the cable connection) does not work either.Comcast is willing to look at the phone but refuses to get involved in the wireless thing.What the heck is wrong?
View 1 Replies
View Related
Feb 15, 2013
I can connect to the Internet when my laptop's connected directly to the modem but not through my wireless router. My laptop can connect to the router, but then I have no Internet access. (I've tried resetting my router and modem.[CODE]
View 1 Replies
View Related
Feb 18, 2012
Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.
I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?
View 14 Replies
View Related
Jun 27, 2012
I updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct
View 1 Replies
View Related
Jul 16, 2012
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies
View Related
