Router Cannot Connect To The Internet (via Cable-modem)

Jun 27, 2012

I updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct

View 1 Replies


ADVERTISEMENT

Linksys Cable / DSL :: X3000 Modem Router - Cannot Connect To Internet

Mar 26, 2013

I am attempting to install the router but cannot connect to SKY ISP. I can connect my laptop to the router both wirelessly and by cable.

View 5 Replies View Related

Cisco Switching/Routing :: Using 2611 Router To Connect To Internet Via Cable Modem

Sep 8, 2012

I am with Virgin media and have a home lab (2611 routers, 3550 switches, 2950s etc) which i usually just use for testing things on and practicing.
 
Now I tried to connect it to the internet and got some weird things happening.
 
I got NAT and DHCP client all setup correctly on the router (or so  I think!) along with DNS settings but I still can't get Internet access.
 
My network is all setup right so that through using OSPF the router is the gateway (0.0.0.0 route) for all devices. Doing a traceroute confirms this.
 
Yet I never get any further than the router?  I see IP nat translations ticking up as I send more requests but never get a webpage or a reply from any of the machines in my network.  
 
HOWEVER... The router itself does get some replies from Google.co.uk and bbc.co.uk but doesn't seem to want to give anything else on the "inside" a response?
 
Here is a dump of config:
 
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec

[Code].....

View 11 Replies View Related

Broadband :: Connect A Modem / Router To A Cable Modem?

Feb 7, 2012

I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.

View 10 Replies View Related

Can't Connect To Internet Through Cable Modem

May 23, 2011

My mother has an older Compaq laptop running XP home edition. She hasn't used this laptop for a while and it won't connect to the internet through her cable modem.I know it isn't a modem or ISP problem since my laptop will connect just fine. By the way, we are connecting to the cable modem with a cat 5.

View 5 Replies View Related

Can't Connect To Internet Using Ethernet Cable And Modem

Aug 29, 2012

So saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.

Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)

So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.

View 14 Replies View Related

Acer AM3100 Desktop Doesn't Connect To Internet Through Cable Modem

Mar 26, 2011

I have an Acer AM3100 desktop running Windows Vista. It is connected to a netgear wireless router via an ethernet cable. I also have two laptops connected to the same router. The laptops connect to the internet fine but the desktop doesn't. I connected to the internet fine (satellite) before I moved but won't connect now. Norton 360 can update automatically and Skype connects but I can't open web pages. I used the norton tool and uninstalled Norton 360 but it still won't connect. I'm attaching the ipconfig information.

Windows IP Configuration
Host Name . . . . . . . . . . . . : Kids-PC
Primary Dns Suffix . . . . . . . :

[Code]....

View 6 Replies View Related

Belkin Router Will Not Connect To Cable Modem?

Aug 6, 2012

Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.

View 5 Replies View Related

RT-N56U Router Won't Connect To Cable Modem

Jan 9, 2012

I bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]

When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.

I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.

Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.

View 4 Replies View Related

New Cable Modem Won't Connect To Existing Router?

Jun 4, 2011

My New comcast cable modem will connect to the internet, as i am connected to it by ethernet right now, but my netgear router will not recognize it and get a link to the internet to get my existing LAN back up.

View 3 Replies View Related

Use 2wire DSL Router / Modem With Cable Internet?

Nov 27, 2011

I have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?

View 1 Replies View Related

How To Connect Ubee Wireless Cable Modem To A Linksys Router

Jan 11, 2013

how to i connect mu linksys router to my ubee cable modem

View 2 Replies View Related

Linksys Cable / Dsl :: Connect Wag160nv2 With Another Modem / Router Wifi?

May 14, 2011

Connect WAG160Nv2 with another modem / router Wi-Fi? 

View 2 Replies View Related

How To Configure Dlink Modem Router With Cable Internet

Jun 30, 2011

have wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade

Aug 28, 2011

Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?

View 3 Replies View Related

Connection Between Access Point / Router / Or Cable Modem And The Internet Is Broken?

Aug 26, 2012

The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.

View 1 Replies View Related

Connection Between Access Point / Router Or Cable Modem - Internet Broken

Jan 31, 2012

My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.

View 3 Replies View Related

Cisco Switching/Routing :: Internet Dropping With 861 Router And DPC3010 Cable Modem

Oct 1, 2012

I am having an issue with my network that has me perplexed. I have a DPC3010 cable modem (Charter internet). I previously had it connected to a Linksys WRT54GL with DD-WRT installed and that was working OK except that I had to reboot it 2-3 times per week. I replaced it with a Cisco 861 (non-wireless) router and it worked OK for a few hours then it started dropping the internet connection (it goes up and down constantly). If I switch back to the Linksys everything works fine again. I am using the same cables in either case so I know it's not a cabling issue. I upgraded the firmware to c860-universalk9-mz.151-4.M3.bin, but it made no difference. I was starting to suspect a problem with the physical ports on the router, but I decided to try connecting the 861 behind the Linksys and turns out it works fine in that setup.

So to recap...
If I connect the 861 directly to the modem my internet connection bounces up and down
If I connect the Linksys directly to the modem my internet connection is fine
If I connect the Linksys directly to the modem and the 861 to the Linksys everything works fine (my PC is connected to the fe0 port of the 861)
 
Are the 861 and the modem simply incompatible or is it a configuration issue? I have attached my 861 config to this thread.

View 3 Replies View Related

Linksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode

Mar 23, 2012

I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?

View 1 Replies View Related

How To Connect Standard TV To Cable Modem

Apr 13, 2011

I wanna subscribe to Internet TV. To watch it on computer screen I need to log in to the site where I registered, i.e. enter my login ID and password. But I want to watch it on my TV WITHOUT my PC. I realize that I have to buy a TOP BOX , connect it to TV and to cable modem. The question is how the TOP BOX knows my login and password to pass it to the site through modem.How do I enter it to tob box?

View 2 Replies View Related

Make The Cable Modem And PC To Re-connect To The Web?

Jun 24, 2011

I am using a cable company called Cox.net for the internet. The cable modem is Motorola brand.Sometimes, the modem got disconnected due to outage in my area. But after Cox fixed the outage, I have to reset the modem. The problem is I do not know when the outage is fixed. Sometimes, I reset the modem and call cox all day long. Is there a modem which can reset itself after there is the internet signal?The second question is my desktop pc, which connected to the wireless router through a cable, sometimes displays a error page in IE8 (Internet Explorer). At the same time, the laptops using wireless can view IE8 pages.I think what happened is there is a internet signal outage in my house but the laptops got re-connected to the internet automatically and the desktop did not re-connect. Sometimes, I can ping a website on the desktop but I cannot see the pages in IE. Re-open IE does not fix the problem. The solution is to re-boot the pc. Is there a network card or software I can use to re-connect to the web after the internet signal becomes available? My pc's mother board has the network device to plug in the cable. The brand is Gigabyte.

View 2 Replies View Related

How To Connect 2 PCs To A Cable Modem Via TP Switch

Feb 6, 2011

How may I connect 2 PCs to a Cable Modem via a TP Switch? Only 1 PC has net connectivity while the other one shows invalid IP address problem.

View 4 Replies View Related

Connect 2 Routers To A Cable Modem?

May 29, 2012

i have a cable modem and i want to connect 2 diferent wireless router .when i connected i dont have internet trought LAN ports just wireless and i need have internet in those LAN ports.

View 4 Replies View Related

Connect Two Routers To One Cable Modem?

Jun 21, 2011

My network currently consists of one cable modem, and one linksys router.i was given a Belkin N router as a gift, and instead of returning it for a different brand ive decided to keep it. i would like to essentially use a splitter or switch in between my current router and modem.This is the plan. Keep modem and linksys router in the den, use a splitter or switch to split the signal from the modem to each router. Use a 50+ foot ethernet cord running from the splitter or switch through the attic and into another room.

View 12 Replies View Related

Cannot Connect To Internet Via Modem Router?

Sep 12, 2011

For several years I was connected to the internet via a USB modem (with TalkTalk being my ISP), however, after purchasing a laptop with Wi-Fi for my partner's daughter, decided it was time to get a router so we could all use the internet.I purchased a Netgear N150 Wireless ADSL2+ Modem Router, model DGN1000, connected (via ethernet as the desktop has no wireless receiver) and installed it as per instructions supplied.However since that point I have been unable to connect to the internet on my desktop through the router. Wireless devices (several laptops, iPhones and games consoles) have no issues whatsoever in connecting and using the internet.

At first the desktop kept saying that I had "limited or no connectivity" which I eventually sorted out, there was some kind of issue with my IP address, but I can't remember what now. Now I when I try to load any website, Internet explorer tells me it couldn't load the page due to .... Google Chrome is more specific and tells me that the DNS lookup failed. I have tried updating the ethernet controller driver, using the 'flushdns' command, and after discovering many other people on TalkTalk tech forums having similar DNS issues, tried using DNS addresses that were suggested by both their support staff and members of the public (i.e. Google's DNS 8.8.8.8), and still nothing. If I reconnect my USB modem I can connect to the internet no problem, but I'd prefer to only have one modem on the go.I am running a HP Pavilion with Win XP (SP2), and all the laptops that have connected wirelessly (including the one I'm using now) are running Vista.

View 8 Replies View Related

Modem Connect To Internet But Router Does Not?

May 20, 2012

Last night Comcast reset our modem (from afar) so we could get a free movie to work. After that, we got the movie but my wireless internet now does not work. I can connect when attached to the cable modem but when I plug into the router I don't have access to internet.The router is plugged in and all lights are working (it acts normally otherwise). Also, our landline phone (which is in the bundle of the cable connection) does not work either.Comcast is willing to look at the phone but refuses to get involved in the wireless thing.What the heck is wrong?

View 1 Replies View Related

Modem Can Connect To Internet But Router Can't?

Feb 15, 2013

I can connect to the Internet when my laptop's connected directly to the modem but not through my wireless router. My laptop can connect to the router, but then I have no Internet access. (I've tried resetting my router and modem.[CODE]

View 1 Replies View Related

Why Router Work With DSL Modem But Not Cable Modem

Jan 6, 2013

I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.

View 3 Replies View Related

Linksys Cable / DSL :: E1550 Cannot Connect Via Dsl Modem

Oct 2, 2011

Have an existing befsr41 / westell b90-210015 connection that has been working for years... replaced the befsr41 with a e1550 and cannot connect to the internet. Tried to connect to the modem directly to see how to put into 'bridge mode' but cannot find the right ip address.

View 1 Replies View Related

Can't Connect To Internet / Router After Modem Reset?

Feb 18, 2012

Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.

I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?

View 14 Replies View Related

Will Cable Modem Work For DSL Internet?

Feb 2, 2011

I have DSL setup in my house and I want to know if using a cable modem will work and increase my speed. And will it work with a linksys router

View 1 Replies View Related

Broadband :: Direct Connect Cable Modem To Computer?

Jan 7, 2011

I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.

View 3 Replies View Related

How To Connect Satellite Receiver To Modem Through Ethernet Cable

Oct 9, 2012

I want to connect my satellite receiver to my modem through Ethernet cables. First connect the modem to Ethernet outlet using standard small Ethernet cable.connect Ethernet outlet A to outlet B using Ethernet cable inside the wall.connect outlet B to the receiver using standard small Ethernet cable.I want to know how I make the connection in outlet A and outlet B to make this work.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved