Connect 2 Routers To A Cable Modem?
May 29, 2012i have a cable modem and i want to connect 2 diferent wireless router .when i connected i dont have internet trought LAN ports just wireless and i need have internet in those LAN ports.
View 4 Replies
ADVERTISEMENT
Connect Two Routers To One Cable Modem?
Jun 21, 2011My network currently consists of one cable modem, and one linksys router.i was given a Belkin N router as a gift, and instead of returning it for a different brand ive decided to keep it. i would like to essentially use a splitter or switch in between my current router and modem.This is the plan. Keep modem and linksys router in the den, use a splitter or switch to split the signal from the modem to each router. Use a 50+ foot ethernet cord running from the splitter or switch through the attic and into another room.
View 12 Replies View RelatedCisco LAN :: 3550 / 2610 - Connect 2 Routers To Cable Modem
Oct 29, 2012i have 2 routers with a switch and pc connected to the switch. i am working on RIP and i enabled it on both routers.
my current set up is this:
PC---Switch(3550)---Router2(2610)---Router1(2610)--- Cable modem
I am able to ping from pc to Router1. I am able to ping 4.2.2.2 and google from Router1 but unable to ping it from Router 2 and pc.
Here is my config for Router1:
Current configuration : 1089 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
[code].....
Broadband :: Connect A Modem / Router To A Cable Modem?
Feb 7, 2012I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedRouters / Switches :: Connect Modem To Wireless Router / Modem Combo?
Aug 23, 2011My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedCisco Routers :: RV042 Site VPN Behind Cable Modem
Oct 23, 2012Having some issues getting a site to site VPN connected between two RV042. Any experience getting this to work behind a Motorola SBG9000.Will I be able to get this working? Or will I have to organise a cable modem through my ISP instead
View 1 Replies View RelatedRouters / Switches :: Connecting A Cable Modem To Wireless Router?
Feb 7, 2011I am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).
View 3 Replies View RelatedRouters / Switches :: Create 2 Networks On Same Cable Modem With A Firewall?
Sep 14, 2012how do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
View 4 Replies View RelatedBelkin AC900 / Connecting Two Wireless Routers To One Cable Modem?
Dec 8, 2012I have linksys router connected to my cable modem. I want to change it Belkin AC900. How can I keep the linksys connected until I have tested set up for Belkin AC900 router.
View 2 Replies View RelatedBelkin Routers :: AC1200 Incompatible Cable Modem To Configure
Mar 9, 2013My Comcast cable modem does not have a 2nd port needed to connect my Belkin AC1200 wireless router. Is there another way to configure this or are my options to either buy a new cable modem or try to upgrade it through Comcast?
View 1 Replies View RelatedHow To Connect Standard TV To Cable Modem
Apr 13, 2011I wanna subscribe to Internet TV. To watch it on computer screen I need to log in to the site where I registered, i.e. enter my login ID and password. But I want to watch it on my TV WITHOUT my PC. I realize that I have to buy a TOP BOX , connect it to TV and to cable modem. The question is how the TOP BOX knows my login and password to pass it to the site through modem.How do I enter it to tob box?
View 2 Replies View RelatedMake The Cable Modem And PC To Re-connect To The Web?
Jun 24, 2011I am using a cable company called Cox.net for the internet. The cable modem is Motorola brand.Sometimes, the modem got disconnected due to outage in my area. But after Cox fixed the outage, I have to reset the modem. The problem is I do not know when the outage is fixed. Sometimes, I reset the modem and call cox all day long. Is there a modem which can reset itself after there is the internet signal?The second question is my desktop pc, which connected to the wireless router through a cable, sometimes displays a error page in IE8 (Internet Explorer). At the same time, the laptops using wireless can view IE8 pages.I think what happened is there is a internet signal outage in my house but the laptops got re-connected to the internet automatically and the desktop did not re-connect. Sometimes, I can ping a website on the desktop but I cannot see the pages in IE. Re-open IE does not fix the problem. The solution is to re-boot the pc. Is there a network card or software I can use to re-connect to the web after the internet signal becomes available? My pc's mother board has the network device to plug in the cable. The brand is Gigabyte.
View 2 Replies View RelatedHow To Connect 2 PCs To A Cable Modem Via TP Switch
Feb 6, 2011How may I connect 2 PCs to a Cable Modem via a TP Switch? Only 1 PC has net connectivity while the other one shows invalid IP address problem.
View 4 Replies View RelatedCan't Connect To Internet Through Cable Modem
May 23, 2011My mother has an older Compaq laptop running XP home edition. She hasn't used this laptop for a while and it won't connect to the internet through her cable modem.I know it isn't a modem or ISP problem since my laptop will connect just fine. By the way, we are connecting to the cable modem with a cat 5.
View 5 Replies View RelatedBelkin Router Will Not Connect To Cable Modem?
Aug 6, 2012Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies View RelatedCan't Connect To Internet Using Ethernet Cable And Modem
Aug 29, 2012So saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.
Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)
So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.
RT-N56U Router Won't Connect To Cable Modem
Jan 9, 2012I bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]
When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.
I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.
Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.
New Cable Modem Won't Connect To Existing Router?
Jun 4, 2011My New comcast cable modem will connect to the internet, as i am connected to it by ethernet right now, but my netgear router will not recognize it and get a link to the internet to get my existing LAN back up.
View 3 Replies View RelatedRouter Cannot Connect To The Internet (via Cable-modem)
Jun 27, 2012I updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct
View 1 Replies View RelatedLinksys Cable / DSL :: E1550 Cannot Connect Via Dsl Modem
Oct 2, 2011Have an existing befsr41 / westell b90-210015 connection that has been working for years... replaced the befsr41 with a e1550 and cannot connect to the internet. Tried to connect to the modem directly to see how to put into 'bridge mode' but cannot find the right ip address.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: WR841ND / WR541G - Configuring 2 Routers To One Cable Modem
Mar 29, 2013Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : optimum online
I have two wireless routers:
TP Link TL-WR841ND
and
TP Link TL-WR541G
I would like to:
use the TL-WR541G for my children wireless laptop, wireless ipad and wireless iphones.
I can turn this unit off at a specific time each evening as I wish.
The WR841ND is used for my wireless laptop, wired iMac, wired Roku stream player and wired Voip adapter.
I tried a few things but really do not know what I am doing and I cannot get both wireless routers to access the internet.
What I tried so far:
Cable modem ethernet out to the input on the WR841ND router. took one of the four hardwire outputs from the WR841ND and ran into the input on the WR541G I powered on the cable modem....it booted... i then powered each router up and waited for each to boot. I launched web browser and navigated to : http://192.168.0.1/ this allowed me to setup the WR841ND router.
it's current settings:
Firmware Version: 3.13.27 Build 121101 Rel.38183n
Hardware Version: WR841N v8 00000000
WAN type: dynamic IP
LAN IP address: 192.168.0.1
subnet mask: 255.255.255.0
DHCP Server: enabled
Start IP: 192.168.0.100
End IP: 192.168.0.199
How do I set up the second router? I tried to disable the DHCP server on router 2 (WR541g) and change the IP but don't know what to change it to.
Cisco Routers :: RVS4000 V1 Connected To Comcast Extreme 100 Mbps Cable Modem
Jul 24, 2011I have an RVS4000 V1 router connected to a Comcast Extreme 100 mbps cable modem.The port setting for the port (number 4) is 1000Mbps Full Duplex, auto Negotiate.why the RVS4000 is throttling the port?
View 3 Replies View RelatedBroadband :: Direct Connect Cable Modem To Computer?
Jan 7, 2011I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies View RelatedHow To Connect Satellite Receiver To Modem Through Ethernet Cable
Oct 9, 2012I want to connect my satellite receiver to my modem through Ethernet cables. First connect the modem to Ethernet outlet using standard small Ethernet cable.connect Ethernet outlet A to outlet B using Ethernet cable inside the wall.connect outlet B to the receiver using standard small Ethernet cable.I want to know how I make the connection in outlet A and outlet B to make this work.
View 3 Replies View RelatedD-Link DIR-601 :: How To Connect WAN With A Motorola SBG901 Cable Modem
Feb 13, 2012I've been trying to connect my D-Link DIR-601 router with a Motorola SBG901 cable modem. The modem itself has a built-in WIFI (G) and one ethernet port, but not good enough for my purposes. I need more wired connections and an (N) WIFI connection, which the D-Link could provide, if I could get it to work. I just cannot get the two pieces of equipment to talk to each other. I can set up 2 independent LAN's, but no WAN (internet connection) from either. D-Link has provided pages of instrutions, but nothing works.
View 1 Replies View RelatedRouters / Switches :: Install Surfboard Extreme Wireless Cable Modem And Gigabit Router
Jan 13, 2013My computer is not wireless so I have needed a wireless router from Time Warner. Directions tell me to connect to my computer. Will that solve the fact that my computer is not built in wireless?
View 2 Replies View RelatedHow To Connect Ubee Wireless Cable Modem To A Linksys Router
Jan 11, 2013how to i connect mu linksys router to my ubee cable modem
View 2 Replies View RelatedLinksys Cable / Dsl :: Connect Wag160nv2 With Another Modem / Router Wifi?
May 14, 2011Connect WAG160Nv2 with another modem / router Wi-Fi?
View 2 Replies View RelatedLinksys Cable / DSL :: X3000 Modem Router - Cannot Connect To Internet
Mar 26, 2013I am attempting to install the router but cannot connect to SKY ISP. I can connect my laptop to the router both wirelessly and by cable.
View 5 Replies View RelatedD-Link DIR-655 :: Won't Connect To Charter Cisco Dpc3010 Cable Modem
Feb 8, 2012my dir-655 rev. A2 router won't connect to the new modem that Charter sent me. I had the scientific Atlanta model dpc2100r2 modem but Charter called and said that they have upgraded my speed for free from 18/2 to 30/4 and that I needed a new docsis 3.0 compatable modem in order to take full advantage of the speed upgrade. I received the modem and connected an activated it according to their instructions. The modem works fine when connected to the PC only but as soon as I connected to the dir 655 the link light went out on the modem and I lost my internet connection. The first step I took was to clone the mac address in Wan section of router. It still did not work. The next step was to turn the modem off, the router off and shutdown the PC. I waited until this morning to reconnect everything. I started the PC, then I started the modem and waited for it to stabilize and finally I restarted the router. I still had no connection. The status page of the router said that the cable was disconnected and that network was disconnected. There was no info to release so I clicked the renew button but nothing happened.
View 3 Replies View RelatedAcer AM3100 Desktop Doesn't Connect To Internet Through Cable Modem
Mar 26, 2011I have an Acer AM3100 desktop running Windows Vista. It is connected to a netgear wireless router via an ethernet cable. I also have two laptops connected to the same router. The laptops connect to the internet fine but the desktop doesn't. I connected to the internet fine (satellite) before I moved but won't connect now. Norton 360 can update automatically and Skype connects but I can't open web pages. I used the norton tool and uninstalled Norton 360 but it still won't connect. I'm attaching the ipconfig information.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kids-PC
Primary Dns Suffix . . . . . . . :
[Code]....
After Wiping Windows Vista And Installing XP DPC2203 Cable Modem Won't Connect
Jan 7, 2012I wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N Desktop Detects Modem But It Fails To Connect
May 17, 2012I'm using Linksys WAG160N - ADSL Modem/Router on one Desktop with Linksys WUSB Adapter. This connection is working fine.Recently I decided to add another Desktop wirelessly to share network, files and internet access. The second desktop is located in another room (approx. dist. is 30 Ft.)The second desktop detects the Modem but it fails to connect and it shows limited or no connectivity.
1. Allow Internet Access to both the desktops without loosing connectivity or without comporomising on speed.
2. Allow file/disk haring of desktop 2 with desktop 1.