Desktop Does Not Connect To Netgear Modem
Aug 26, 2011
I have Windows 7 64 bit.I bought a Netgear DGN2000 approximately two years ago. It is working well.Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).I worked on my desktop this morning, uninstalled some programmed, but must have uninstalled a driver or something.I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point.If I troubleshoot, it states “Windows do not detect a properly installed network adaptor.
View 3 Replies
ADVERTISEMENT
Jan 1, 2012
Actually I've a WiFi enabled (Nokia) Mobile phone. I also have a internet enabled USB modem (HUAWEI) & a Netgear Wireless router.I am using internet with this USB modem in my desktop PC at home.But now I want to use internet in my mobile phone. So, I bring that wireless router.
View 3 Replies
View Related
Feb 15, 2012
I hav a laptop conecteted to the internet with comcast service and a netgear wireless router that works fine. but bought a desktop and when i hook it to the router i get no internet. im running windows 7 ultimate on both machines. i am gettin a thing saying unidentified network in my network settings and i called comcast whent through resetting the modem and router with them and nothing then they tell me i have to pay them to run another machine of of my router this is ridiculas i have the machine pluged into the port on the router with anethernet cable everything is hooked up right i know this im pretty computer savy as ive built many machines in the past.
View 1 Replies
View Related
Nov 19, 2012
I have a desktop and a laptop connected to one router, my desktop is connected via ethernet wire and my laptop is connected via wireless.
Here's the problem, on my desktop under "Network" in the Windows Explorer, I can see my laptop's name as well as my desktop's name. But when I want to go into my laptop it says "Windows cannot access \<laptop name>".
But, if I go onto my laptop and do the same thing, it works perfectly, no errors, no problems. Both of them have their IPs automatically assigned as well as the DNS server address. Both have File Sharing enabled and both have Network Discovery enabled.
My desktop has Windows 7 64-bit and my laptop has Windows 8 Pro 64-bit. I have tried disabling both firewalls, no luck. I used to be able to connect to my laptop, but now I can't. But I can connect to my desktop through my laptop. My router is a NETGEAR DGN2200
View 3 Replies
View Related
Jan 7, 2011
connect the desktop and my loptop in one modem
View 1 Replies
View Related
Dec 11, 2012
How do you connect a usb modem to a wireless router?
View 1 Replies
View Related
Sep 10, 2011
I have a Magnavox Blu-Ray player, model MBP5130/F7. I leep getting the DHcP cannot be acquired.
View 4 Replies
View Related
Mar 26, 2011
I have an Acer AM3100 desktop running Windows Vista. It is connected to a netgear wireless router via an ethernet cable. I also have two laptops connected to the same router. The laptops connect to the internet fine but the desktop doesn't. I connected to the internet fine (satellite) before I moved but won't connect now. Norton 360 can update automatically and Skype connects but I can't open web pages. I used the norton tool and uninstalled Norton 360 but it still won't connect. I'm attaching the ipconfig information.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kids-PC
Primary Dns Suffix . . . . . . . :
[Code]....
View 6 Replies
View Related
May 17, 2012
I'm using Linksys WAG160N - ADSL Modem/Router on one Desktop with Linksys WUSB Adapter. This connection is working fine.Recently I decided to add another Desktop wirelessly to share network, files and internet access. The second desktop is located in another room (approx. dist. is 30 Ft.)The second desktop detects the Modem but it fails to connect and it shows limited or no connectivity.
1. Allow Internet Access to both the desktops without loosing connectivity or without comporomising on speed.
2. Allow file/disk haring of desktop 2 with desktop 1.
View 1 Replies
View Related
Nov 18, 2011
I have a Netgear DGN3500 wireless modem router that I'm trying to setup on my Dell desktop "Dimension C521". I get the error message "Ethernet adaptor required". I'm not sure why I am encountering the error message, as I have successfully installed a modem previously on the desktop via a ethernet cable.
View 1 Replies
View Related
Feb 23, 2011
Cannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies
View Related
Feb 3, 2013
Buffalo Linkstation HD-H250LAN and Netgear N300 DGN2200v3 ADSL2 Modem Router.
3 PCs connect without a problem, 2 wireless and 1 wired, but cannot get it to recognise the Buffalo Linkstation. Netgear uses 192.168.0.1. but Belkin used 192.168.2.etc.
Linkstation setup says Linkstation not connected, but it is.
View 3 Replies
View Related
Jun 7, 2012
Tried numerous times but no Internet connection between Directv hr23-700 and Netgear DSL 7550 modem/router. Is connected to home network, but no Internet.
View 1 Replies
View Related
Nov 2, 2012
when the wireless router is plugged in to my acer desktop computer (running on windows 7) it will cause the desktop to reboot itself numerous times what do i need to do to make this stop so i can hook up wireless to the laptops i have?
View 1 Replies
View Related
Jul 26, 2012
My PC can't seem to keep the wireless connection for longer than a few seconds without it trying to reconnect and eventually drop again. Other family members' PCs don't seem to have this problem and my laptop also has a stable connection.
I used to have no problem connecting, but this problem arose one day. My house uses Verizon FIoS, the router is a Netgear R3600 and my PC uses AVG.
The picture has the signal showing up, but then it disappears seconds later only to reappear again.
View 4 Replies
View Related
Jan 15, 2013
I bought a netgear n600 wnda3100vs wifi adapter for my desktop.I installed it and everything. Now when I try to connect, it finds my router, but for some reason it will not connect. My router is a 2wire that runs on 802.11g[CODE]
View 1 Replies
View Related
Jan 13, 2013
I have a Dell desktop with Windows 7, a Dell laptop with Windows XP & a Toshiba Satellite laptop with Windows 7. I bought a new router for faster internet speed - Netgear N600. I now have internet on the two laptops, the Kindle Fire HD & my Iphone. I cannot access the internet on the desktop. It shows that I am connected to an unidentified network but I can't get online. The techs I talked to said it's a problem with my computer but I didn't have that problem before.
View 1 Replies
View Related
Nov 13, 2011
How do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.
View 3 Replies
View Related
Sep 9, 2012
I plugged in the USB from the Modem to my desktop and my desktop doesn't see the modem, I don't want the router to my desktop because it is interferring with my magicjack
View 3 Replies
View Related
Jul 21, 2011
I put a new windows on my computer froma cd and now i cant get internet directly from my modem to decktop what to do to get it back.
View 1 Replies
View Related
Mar 12, 2011
Modem >> switch router1 >> switch >> computer
same Modem >> same switch >> router2 >> switch >> computer
Now I want to access computers from router 1 to router 2 computers.I opened the router 2 web page and forwarded it. I put service port no. 3389, ip address of a computer of router 2 network. Now I can access the specific computer via remote desktop from router 1 computers using public ip .But what I need is I want to access via mstsc all computers of the router 2 network. using service port, ip address of one computer, I can access only one computer.
View 2 Replies
View Related
Jan 16, 2012
i purchased a Dell N7110 from Dell last week, and a few days later I purchased a NETGEAR PTV2000 wireless display adapter. It was my understanding the N7110 would support the PTV2000; my N7110 specs are below.Originally, I downloaded the required software (Intel WIDI) and drivers from the Intel website.
The laptop and PTV2000 adapter seemed to start fine in that the security code was given on my TV screen and I was able to enter it in the Intel WIDI software. Next step was to select "connect" to the adapter. The connection was initialized, as the green light on the PTV2000 was flashing and my TV screen said "connecting", then "connected". At the moment it said "connected", my laptop screen immediately flashed black, then restored itself approx one second later with the graphics on the laptop screen larger (larger icons) than normal. Approximately one second after this occurred, the connection was lost and the Intel software stated the following error: "unable to send desktop to wireless display, try restarting the application. If the problem persists, try re-installing the Intel WIDI software".
I retried the software numerous times with same results. I uninstalled then re-installed the Intel WIDI software and drivers with the same results. I also uninstalled and re-installed the software, but got them from the Netgear website, and then later from the Dell website (all had Intel WIDI software to download), which all ended in the same results (original problem still exists).After countless tries of running Intel WIDI, the program would on rare occasions, lock up and become unresponsive, while the green light on the adapter was still flashing (connection being made) and the TV message said "connected". The screen never changed from "connect", the desktop image never appeared on the TV, and I would have to use task manager to shut the program down.
Netgear and Intel websites do not address this issue, other than saying "try uninstalling then reinstalling the software", which I did countless times. Web searches hint the real problem is in the Graphics drivers on the Dell - I did find a thread on this site (Dell site) complaining the PTV2000 would not play DVDs or Blueray, and the person changed the Graphics driver, but now cannot get Windows to boot - I believe the Dell techs are currently mailing him software to correct this problem. Because of this, I am very reluctant to change the Graphics drivers as I do not want to cause the same issue on my machine...I have not had any problems with the wifi side of things, in that I am always able to initialize a "connect" without issues, and it tries to connect but just never completely does... tell me if the original problem I stated above can be corrected, and the steps I need to take, or should I return the PTV2000 and forget the whole wireless display idea?
Side Note: I can provide the exact softeware and driver links I used if required, but didn't as there really wasn't much choice - The Intel site, Netgear site, and DELL site all provided short instructions and only one download option; Win 7 32 or Win 7 64. I used Win 7 64 option.
Quantity
Parts #
Part Description
1
62GY1
Base, Notebook, BTS, FCG06, DELL AMERICAS ORGANIZATION..., N7110
[code]....
View 1 Replies
View Related
Feb 26, 2012
I've got a Livebox router/modem that provides an ethernet connection for our desktop and wifi connections for our smartphones (all-in-one kind of thing) in a SOHO environment. what i'd like to do is access one from the other, that is move files between a smartphone and the desktop without additional wiring or hardware.
View 1 Replies
View Related
Apr 18, 2011
I am hard wiring a Netgear wireless modem DG834G to the LAN connection on my PC. The modem lights up, the internet light flashes then goes green and the connection to the PC is lit. My PC wont see the modem - when I type 192.168.0.1 it cannot access the Netgear setup page. I have tried swapping the cable and even bought a PCI Lan card and installed it but the modem wont work in either port? I've had the modem checked out and it works fine it's just something in my PC stopping it from seeing the Modem. At present I have a USB modem hard wired which works fine. I unplug this when trying to setup the NEtgear modem...
View 6 Replies
View Related
Nov 15, 2011
My mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?
View 9 Replies
View Related
Nov 21, 2012
Now unable to connect laptop wirelessly. The laptop can see the connection, but when I click it to connect it just doesn't. Have tried rebooting both laptop, desktop and modem, left it overnight, can't connect smartphone to it either. All were working perfectly until I had to reinstall.
View 6 Replies
View Related
Sep 24, 2011
I am experiencing constant DNS issues page not found errors after about 10 clicks it seems to work, and actually get to the page, sometimes it takes longer or i may have to resete the modem again for my system to work, now i have a computer lan buisness with 10 computers connected to it and the internet speed is 4 mbps, i have called the internet provider they did some test, and the modem seems fine they have changed my modem 3 times for that reason , so i know its not the modem , i have switched cables connected to the modem, i use to own a hub i thought that was the problem, so i bought a NetGear's FS116 switch and the problem persists, i have switched over to different inernet browsers , that didnt work, changed my computers modem to assigne ip addresses , and that didnt woerk, also changed my dns servers from my modem by the ones provided by my service provider , and that didnt i am stuck. i have a 15 ft cable connected from my modem to the switch. and all my computers connected to the switch, the problem seems to be more when i have more then 5 computers running at the same time. i have also switched the 15ft cable and the problem still persists, error not found could me a config with the lan settings or dns error
View 3 Replies
View Related
Jun 9, 2011
So here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
View 3 Replies
View Related
May 27, 2011
I am using NetGear DGN1000 router which includes ADSL modem. I bought another router (Linksys E3000) with I connected to the old one. I would like to setup port forwarding on the new one and use the old one as a modem only. How can I do that?
View 3 Replies
View Related
Jun 10, 2012
So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies
View Related
Dec 27, 2011
I am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle.
View 12 Replies
View Related
Mar 8, 2011
For 3 years my Pantech 190 modem has been plugged in to my Dell desk top and internet access for my Dell laptop has beem shared thru a Netgear router .
I purchased the new Verison 290/4G modem. It workrd great until I tried to print on my HP printer thru the network. No luck.
Verizon says that the 290 is not a dial up modem, but instead looks like a network adaptor and the desk top doesn't want to run two networks - the Netgear and the 290. In other words, the 290 will not work on a system that is connected to any other network.
View 3 Replies
View Related
Dec 1, 2011
My wife bought her self an xbox last night so we can game togher. We both tried to get online last night, but came up with a strict nat for one of the machines. Which ever machine got online first got the open nat type. i've tried DMZ host with port forwarding for both machines to no success. We have a netgear modem router from charter cable. the model number I believe is CG3000D. she was on a wireless network and i was wired straight to the modem router.
View 3 Replies
View Related
