Using Pantech UML290 LTE USB Modem With Netgear Router?
Mar 8, 2011
For 3 years my Pantech 190 modem has been plugged in to my Dell desk top and internet access for my Dell laptop has beem shared thru a Netgear router .
I purchased the new Verison 290/4G modem. It workrd great until I tried to print on my HP printer thru the network. No luck.
Verizon says that the 290 is not a dial up modem, but instead looks like a network adaptor and the desk top doesn't want to run two networks - the Netgear and the 290. In other words, the 290 will not work on a system that is connected to any other network.
View 3 Replies
ADVERTISEMENT
Dec 11, 2012
How do you connect a usb modem to a wireless router?
View 1 Replies
View Related
May 27, 2011
I am using NetGear DGN1000 router which includes ADSL modem. I bought another router (Linksys E3000) with I connected to the old one. I would like to setup port forwarding on the new one and use the old one as a modem only. How can I do that?
View 3 Replies
View Related
Dec 1, 2011
My wife bought her self an xbox last night so we can game togher. We both tried to get online last night, but came up with a strict nat for one of the machines. Which ever machine got online first got the open nat type. i've tried DMZ host with port forwarding for both machines to no success. We have a netgear modem router from charter cable. the model number I believe is CG3000D. she was on a wireless network and i was wired straight to the modem router.
View 3 Replies
View Related
Feb 23, 2011
Cannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies
View Related
Jan 1, 2012
Actually I've a WiFi enabled (Nokia) Mobile phone. I also have a internet enabled USB modem (HUAWEI) & a Netgear Wireless router.I am using internet with this USB modem in my desktop PC at home.But now I want to use internet in my mobile phone. So, I bring that wireless router.
View 3 Replies
View Related
May 8, 2012
I recently got a cable modem. It is Netgear CBC-382d1. It has one ethernet port and no wireless.I have 3 laptops (one will be using ethernet not wireless), 2 iphones, 1 ipad and a PS3 that needs to go online. All but one laptop are wireless. Which 300 Mbps wireless 4 port ethernet router is recommended?
View 5 Replies
View Related
Dec 16, 2012
install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.
PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.
I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:
unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.
I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.
when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.
View 1 Replies
View Related
Feb 15, 2012
I hav a laptop conecteted to the internet with comcast service and a netgear wireless router that works fine. but bought a desktop and when i hook it to the router i get no internet. im running windows 7 ultimate on both machines. i am gettin a thing saying unidentified network in my network settings and i called comcast whent through resetting the modem and router with them and nothing then they tell me i have to pay them to run another machine of of my router this is ridiculas i have the machine pluged into the port on the router with anethernet cable everything is hooked up right i know this im pretty computer savy as ive built many machines in the past.
View 1 Replies
View Related
Dec 24, 2011
how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies
View Related
Oct 14, 2011
I have a Dell XPS 430 desktop and a Netgear DGN2000 modem/router. My ISP is Zen. The router is connected to the PC by an ethernet cable.I have had no problems accessing the internet for years until a couple of days ago when the monitors on the info bar show a triangle with a yellow exclamation mark. The Windows Diagnose and Repair reports - Error 815. The Broadband Network Connection could not be established because the remote server is not responding.My laptop with a wireless connection to the router as no problem connecting so I assume the router is OK.
View 9 Replies
View Related
Feb 14, 2013
I recently went to a higher speed ADSL which claimed to be 16Mpbs.. It is with Acanac and when i first tested with speed net it came in over 14Mbps. I was using a netgear wireless g router (old) with the 4200 speedstream modem and got these results which I found acceptable. Now using netgear n router modem combo DGN-2000 and my readings are just over 12 Mbps. I tried reverting and still got the lower speeds. I tried isolating one computer hard wired still got the lower 12Mbps.It hasnt really affected my download speeds as far as I can tell but I did find it a little puzzling.
View 2 Replies
View Related
Dec 19, 2011
Placing a second router behind a cable modem router combination.? My second router is a netgear WNR 2000 the first router is Netgear 1000.How should I configure the the WNR 2000?? Default settings?
View 1 Replies
View Related
Feb 16, 2013
I am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
View 3 Replies
View Related
Oct 3, 2012
Basically what is happening is I have a fiber decoder whitch goes into My belkin modem which controls my phone and Internet and with the company I am with we need that modem, I also have a netgear router so I can have wireless through my house but I want to plug LAN into the belkin router and still use the netgear for transmitting wireless.In short I want LAN in belkin but still have the netgear transmitting wireless and everything on the same network,E.g I have a pioneer amp and I use the iPhone app icontrol over my wireless but I can't because the amp is plugged into the belkin and the app is using netgear.
View 1 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Jun 21, 2012
I have an Att combination Netgear modem-router that is painfully slow when accessing wi-fi gear remotely. Everything works great on the lan, but often times out on remote access over the internet.
View 3 Replies
View Related
May 2, 2011
i am unable to configure my netgear router with my clear modem
View 1 Replies
View Related
Oct 21, 2012
Nearly every morning/evening I have to re-boot my router to get internet access. Netgear N300 ADSL2+ modem router Model DGN 2200 (had about a year), Windows 7 64bit Home premium Laptop connected wirelessly, Windows 7 64Bit Home Premium desktop connected by LAN cable. ISP BT Internet. Until recently this set up has been working OK with occasional loss of interent access and need to re-boot router. The internet light has been showing red on those occasions. Over the last two weeks I have found that when I turn one of computers on although all lights on router are green I have no internet access. I have to re-boot, then all is OK until the next day when I have to re-boot again. My phone line appears OK with no noise on line, no reported problems on BT broadband staus. The thing that puzzles me is that the lights are all green on the router yet my networking icon on the pc shows an exclammation mark and 'no internet access' and I do not have access to net.The wireless connection is OK with excellent strength.
View 7 Replies
View Related
May 1, 2012
I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
View 5 Replies
View Related
May 8, 2011
I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies
View Related
Jun 7, 2012
Tried numerous times but no Internet connection between Directv hr23-700 and Netgear DSL 7550 modem/router. Is connected to home network, but no Internet.
View 1 Replies
View Related
Mar 23, 2011
Every day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
View 1 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Mar 25, 2011
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Apr 14, 2012
Lately I encountered random Internet connection issues?My router is a Netgear Wireless ADSL Firewall Modem Router DG834 (Firmware V1.05.0) and my ISP, isn't the most reliable regarding bandwidth... All clients (max 3 at the same time) connect wireless.The problem is that the last few weeks my connections is very unstable, all clients lose the internet connection until you restart the router manually.I can't even connect to the webinterface (192.168.0.1), during the downtimes.
View 4 Replies
View Related
Apr 18, 2011
I am hard wiring a Netgear wireless modem DG834G to the LAN connection on my PC. The modem lights up, the internet light flashes then goes green and the connection to the PC is lit. My PC wont see the modem - when I type 192.168.0.1 it cannot access the Netgear setup page. I have tried swapping the cable and even bought a PCI Lan card and installed it but the modem wont work in either port? I've had the modem checked out and it works fine it's just something in my PC stopping it from seeing the Modem. At present I have a USB modem hard wired which works fine. I unplug this when trying to setup the NEtgear modem...
View 6 Replies
View Related
Aug 26, 2011
I have Windows 7 64 bit.I bought a Netgear DGN2000 approximately two years ago. It is working well.Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).I worked on my desktop this morning, uninstalled some programmed, but must have uninstalled a driver or something.I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point.If I troubleshoot, it states “Windows do not detect a properly installed network adaptor.
View 3 Replies
View Related
Sep 24, 2011
I am experiencing constant DNS issues page not found errors after about 10 clicks it seems to work, and actually get to the page, sometimes it takes longer or i may have to resete the modem again for my system to work, now i have a computer lan buisness with 10 computers connected to it and the internet speed is 4 mbps, i have called the internet provider they did some test, and the modem seems fine they have changed my modem 3 times for that reason , so i know its not the modem , i have switched cables connected to the modem, i use to own a hub i thought that was the problem, so i bought a NetGear's FS116 switch and the problem persists, i have switched over to different inernet browsers , that didnt work, changed my computers modem to assigne ip addresses , and that didnt woerk, also changed my dns servers from my modem by the ones provided by my service provider , and that didnt i am stuck. i have a 15 ft cable connected from my modem to the switch. and all my computers connected to the switch, the problem seems to be more when i have more then 5 computers running at the same time. i have also switched the 15ft cable and the problem still persists, error not found could me a config with the lan settings or dns error
View 3 Replies
View Related
Jun 9, 2011
So here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
View 3 Replies
View Related
Sep 10, 2011
I have a Magnavox Blu-Ray player, model MBP5130/F7. I leep getting the DHcP cannot be acquired.
View 4 Replies
View Related
Mar 21, 2011
My laptops internet runs super slow, but only at our house.It runs at top speed on any other network. My wifes laptop has no issues at all. Have done multiple virus check with multiple different anti virisus programs.We use a Netgear modem I usually connect wireless, but have connected with an Ethernet cord with no change in speed.
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4063 Mb
Graphics Card: ATI Mobility Radeon HD 4650, 1024 Mb
Hard Drives: C: Total - 463711 MB, Free - 389512 MB; D: Total - 13026 MB, Free - 2178 MB;
Motherboard: Quanta, 3628, 18.42, CNF9401DLR
Antivirus: AVG Internet Security, Updated and Enabled
View 3 Replies
View Related
