Netgear 54 MPBS - Computer Cannot Detect Router
Apr 20, 2011
My fianc just reinstalled Windows XP Home Edition last night as his computer was virus-ridden and it was becoming impossible to use. It took a couple times for the computer to even pick up the Windows disc, but fourth time lucky and it was good to go. Once reinstalled we tried to get everything checked and download some anti-spyware etc, but it wouldn't pick up the router. The router is wireless, but connects to his computer via a cable. The router is a Netgear 54 MPBS Wireless Router, DG834G v3. We have been told that the computer should just automatically pick up the router, but the only way it will allow us to try and connect is via a dial up connection.
View 2 Replies
ADVERTISEMENT
Jul 2, 2011
We have been having a problem with one computer on our network unable to detect our network, or when it rarely does connect, it only has one bar and barely works.The files we attached are one of the times it could connect, when we finally caught it at the right time.We have a total of five computers/laptops on our network connected at different times. We recently updated the router and we've updated the drivers for the network adapter on the problem computer.Neither has worked.The computer was moved here a few months ago and because of condensation the graphics card was destroyed. We took it to a computer repair shop (which is how we found this out) and they installed a new graphics card. It hasn't worked since it got here.That computer was traditionally used for gaming (before it moved here) but if we can get into an online game, our ping is really high, in the 100s.
View 8 Replies
View Related
Dec 26, 2011
I no longer have a software disc, but setup via the 192.168.1.1 page has worked out fine...until the last reset. After the last reset/reboot of the wifi, I was unable to set up the wifi beyond use with my laptop. This is, no doubt, user error.WRT320N.No hard wire, wifi is connected to the cable modem. Everything in the house was on the wireless.
Issue: Laptop finds and connects to wifi just fine, password works just fine.iPhone cannot even detect the wifi in the house (but finds every other wifi in the neighborhood)iPad cannot detect the wifi in the house (but finds every other wifi in the neighborhood)Desktop cannot detect the wifi in the house (but finds every other wifi in the neighborhood)What do I need to tweek in the admin page 192.168.1.1 to allow other computers to jack into my wifi?
View 2 Replies
View Related
Oct 17, 2011
I have just got an acer aspire ethos 8951g.I have several laptops at home all connected to the n network on a netgear dgn3300 dualband router.The problem i'm having is my new acer won't discover the n network only the g side of the router.
View 3 Replies
View Related
Mar 13, 2013
I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connection
View 1 Replies
View Related
Jul 3, 2012
wireless works on other household computer, but not the Sony Vaio
View 1 Replies
View Related
Jun 5, 2011
I have a Netgear wireless router that is connected to my desktop in my house to broadcast wireless throughout. However, the main computer is hooked up to an ethernet cord for a hardwired LAN connection. For some reason, my desktop will constantly disconnect from LAN and switch to wireless, back to LAN to wireless etc.
View 1 Replies
View Related
Feb 2, 2013
i load windows 7 onto it and try to get into internet explorer to get google chrome and it says that i need to configure a network so i try and configure one but it says that no networks are connected to it.i had vista on it before windows 7(still couldn't connect)and it said that it was a realtak router but underneath the router it says that it's netgear i don't know which one it is.i have gotten into the router using its ip.also the model for the netgear part is b90-755044-15 it work just fine for this computer although it's on windows XP do i need a driver for the mother board,router,or what.
View 2 Replies
View Related
Aug 26, 2012
When I plug my ethernet cord into my Dell XPS laptop, Windows doesn't detect that I have a connection. I've tried another cord and it works (it's too short to use instead) and my roommate has tried my cord and it works fine on his computer.I've tried diagnosing the problem, disabling and enabling the Local Area Connection, but nothing seems to work.
View 9 Replies
View Related
Jun 27, 2012
We currently have 1 PC and my laptop connected to the internet with 0 hassle. My father brought in his work computer last night and asked me if I could set it up. Only problem is I cannot for the life of me have it connect to the internet.
He has a PC with Win7, and when I search for a network it says there's no connections available. The PC is inches away from the modem. Also, our other two computers had no problem picking out the connection after a quick scan.
I started to lose hope when I ran an ethernet cable into the PC to see if I could get it to recognize the connection.
No luck. This is not a brand new computer, it's his work computer that before the move was operating just fine.
View 8 Replies
View Related
Jun 25, 2011
So I have a wireless router downstairs in my house that usually reaches around the whole house. However as of a couple days ago, whenever I am upstairs I only get limited connectivity. It still detects my router, but I an exclamation point and I can't connect to the internet. However when I am downstairs I have a connection that actually works. This applies to multiple laptops, computers, phones, etc.
View 1 Replies
View Related
Apr 25, 2011
I tried 3 cables, and even one of them was new. So im sure the problem isn't the cables. For some reason, whenever I connect a ehternet cable to my computer, I cannot seem to get internet connection through it. Some days ago I installed this Wireless Lan device from a CD, that came with a sort of antenne I had to put on my computer. It works great, BUT its slow. Thats why i would like to go on internet with cable again. I remember one day to another that my computer didn't detect the cables anymore, what could be the problem?
View 7 Replies
View Related
Sep 1, 2012
Computer unable to detect wireless adapter
View 1 Replies
View Related
Mar 27, 2011
I am about to buy a Netbook from HP with windows 7 Starter.But a few days back when I tried to connect my friend's laptop to my network using WiFi ,it accessed the Internet but did not detect any other XP computers on the Network neither could I ping them nor could I access their shared folders.
2)And What is N Draft?? and how is it different from WiFi-N?
3)And can I set up Guest Network so that I can give the connected computers Internet access but no Shared Folder access..
View 14 Replies
View Related
Feb 27, 2012
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies
View Related
Aug 20, 2012
Have two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies
View Related
Feb 6, 2012
I have a NetGear WNR-1000 wireless G router. I currently only have 1 computer hooked up but I have had 3 computers hooked up to it before. It doesn't matter what internet it's connected to or how it's connected to the modem itself. I have had DSL and Cable hooked up to it and I am currently using it as a secondary router behind my roommates old Wireless B router. He currently has all of his things hooked up via ethernet and wirelessly to his router. So, im download the xirrus wifi inspector thing. It doesn't matter the OS either. I've had XP sp3, vista, and 7 all hooked to it and it's the same all the way around and it doesn't matter the kind of wireless card either!
View 1 Replies
View Related
Apr 21, 2012
I am trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
View 1 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Sep 21, 2011
My desktop failed to detect the local area network, but my laptop successfully detects that network. What may be the reason? Both the case, the green light is blinking (Means there is not problem with the cable/line ?). Is it a problem related to the network pin? The same desktop is successfully connecting through another line. So it means, it not an issue with desktop computer or it's configuration.
View 8 Replies
View Related
Jan 6, 2013
So lately my computer's wireless network has started to get really bad, we have 100mbit, and it only gets about 0.3. This seems to be an issue with the range, or something, since if i move the computer right next to the router, it runs at about 50-60mbit. Now a few days ago i decided to get an ethernet cable to try and solve the issue, but my computer doesn't detect a LAN connection, only the wireless one ( atleast it doesnt show up among the other connections). Some weeks ago the wireless connection worked nicely, but now suddenly it doesnt anymore. Currently i'm typing this from an old mac computer, since my internet doesn't work at all on my pc.
View 11 Replies
View Related
Aug 3, 2012
Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]
View 18 Replies
View Related
Oct 15, 2011
I tried connecting someone else's laptop to a network cable but the laptop refused to detect the hardware device plugged?
View 1 Replies
View Related
Sep 8, 2011
I have the WMP54G internal wireless adaptor. It normally works fine, but I have been having problems with it lately when I turn my computer back on from sleep. Even thought the wireless router works just fine, when the computer wakes up from sleep the adaptor does not seem to detect any network. I have to restart my computer, and then the adaptor detects the network.
View 1 Replies
View Related
Mar 24, 2011
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies
View Related
Sep 27, 2011
Is there any way to use an asa 5510 to detect which computer on the inside of my network is connecting to ip 87.255.51.229. I am being blacklisted for w win32/Zbot connection, I need to identify this computer and get it disconnected from the network ASAP.
View 6 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Mar 7, 2012
My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".
View 5 Replies
View Related
Jan 7, 2011
I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well
View 5 Replies
View Related
Jan 17, 2011
I try to maintain a sizable network at my workplace. We have 10 desktops, 3 laptops (sometimes more) 4 printers/fax, etc.etc. I have just ordered a new HP Pavilion Slim-line S5000 Series with Windows 7 Pro. I cannot get it to connect to the Network. I have set up the server (which runs windows server 2008) with an account called "communications" I have named the computer "communications". I go to the system and security>system: computer name,domain, workgroup settings>change settings. I enter all the information correctly, and it tells me it cannont find the network path. This is happening on this brand new computer, and our old dell optiplex 760 (running windows vista pro). We use a netgear pro-safe 24 port 10/100 switch hub, and a linksys wireless G broadband router model WRT54GS.
View 10 Replies
View Related
Jul 13, 2011
After a quick power surge forced my desktop to reboot, it can't connect to my wireless network, even though everything else can. It may have been applying windows updates at the time of the surge.
Earlier today I shut down my computer to apply some windows updates. A few minutes after it rebooted a power surge knocked it out for an instant and the computer rebooted again. I don't know if it was done applying the updates but for some reason it can no longer connect to a wireless network. It keeps saying "unknown reason" when it fails to connect. I think I had a static IP attached to it.
My iPhone and iPad can still connect to this network, but this one computer can't. It's a desktop running Windows Vista Home Premium with a broadcom adapter added to it. It's too far away to connect to any wired connection. My router is a Netgear WGT624 v4.
I don't think I can post any IPconfig information here because I'm forced to type this on an iPhone.
View 2 Replies
View Related
Dec 6, 2012
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
View 6 Replies
View Related
Feb 25, 2012
For some reason I cannot ping or FTP on a specific computer on my home network. All other computers work fine and the specific computer works fine on other networks. But the combination of this computer and my home network it doesn't like.
I have disabled both windows firewall and my virus software but nothing seems to work. It seems to be a timeout issue as FTP and ping sometimes does work but FTP is increadibly slow when it works and the ping time is very high 670ms and above. I am running windows 7 and my router is a netgear n150
View 4 Replies
View Related
