Netgear - Cannot Connect Computer To Network
Jan 17, 2011
I try to maintain a sizable network at my workplace. We have 10 desktops, 3 laptops (sometimes more) 4 printers/fax, etc.etc. I have just ordered a new HP Pavilion Slim-line S5000 Series with Windows 7 Pro. I cannot get it to connect to the Network. I have set up the server (which runs windows server 2008) with an account called "communications" I have named the computer "communications". I go to the system and security>system: computer name,domain, workgroup settings>change settings. I enter all the information correctly, and it tells me it cannont find the network path. This is happening on this brand new computer, and our old dell optiplex 760 (running windows vista pro). We use a netgear pro-safe 24 port 10/100 switch hub, and a linksys wireless G broadband router model WRT54GS.
View 10 Replies
ADVERTISEMENT
Feb 2, 2013
i load windows 7 onto it and try to get into internet explorer to get google chrome and it says that i need to configure a network so i try and configure one but it says that no networks are connected to it.i had vista on it before windows 7(still couldn't connect)and it said that it was a realtak router but underneath the router it says that it's netgear i don't know which one it is.i have gotten into the router using its ip.also the model for the netgear part is b90-755044-15 it work just fine for this computer although it's on windows XP do i need a driver for the mother board,router,or what.
View 2 Replies
View Related
Feb 27, 2012
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies
View Related
Jul 13, 2011
After a quick power surge forced my desktop to reboot, it can't connect to my wireless network, even though everything else can. It may have been applying windows updates at the time of the surge.
Earlier today I shut down my computer to apply some windows updates. A few minutes after it rebooted a power surge knocked it out for an instant and the computer rebooted again. I don't know if it was done applying the updates but for some reason it can no longer connect to a wireless network. It keeps saying "unknown reason" when it fails to connect. I think I had a static IP attached to it.
My iPhone and iPad can still connect to this network, but this one computer can't. It's a desktop running Windows Vista Home Premium with a broadcom adapter added to it. It's too far away to connect to any wired connection. My router is a Netgear WGT624 v4.
I don't think I can post any IPconfig information here because I'm forced to type this on an iPhone.
View 2 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
Sep 6, 2011
I have a Pre-existing repeating netgear network of a WNR2200 router set up as a base station with a harddrive plugged into it as a network device (readyshare) and another WNR2200 router set up as a repeater.
I want to supply this network using Huawei B260a modem (on the Three network).
I currently have this setup; The b260a IP is 10.0.0.1 subnet 225.225.225.0 and has DHCP turned on (range 10.0.0.100 - 10.0.0.200). This is plugged into the internet lan port of the base station wnr2200. The base station IP is 192.168.1.1 subnet 225.225.225.0 and has DHCP turned on (range 192.168.1.2 - 192.168.1.254) The repeater Wnr2200 is automatically an access point and has an IP of 192.168.1.254
This setup works but the speeds are around 1-2mb slower when connected to the netgear network than if connected directly to the B260a.
View 2 Replies
View Related
Mar 13, 2011
I have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI...
1 computer - Windows Vista Home Premium
1 computer - Windows XP Home
Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
View 1 Replies
View Related
Dec 3, 2011
Im running W7 64 bit and i have a netgear wna1000 and it detects networks but wont connect to them
View 5 Replies
View Related
Dec 20, 2011
new HP 2000 computer he just purchased. I brought it to my house to set it up. No problems connecting to wifi at my home. Downloaded all the updates and got it ready for his house. When I tried connecting to his network, it kept giving me the network key. I know I was entering the correct information because we had his older computer and I copied the exact thing. I had also made a folder when I set up his other computer with his information for his network in it and I was going by that. I tried to automatically connect and I also tried to manually connect. I deleted the name of my network (that worked) and rebooted. It continually gives me the block to put the password in. I brought it back to my house and the wifi connected with no problems. His old toshiba had no problems connecting to his network. I disconnected it and reconnected it. Is there something about the settings I am not doing? Or is it a firewall setting? Is there something in the modem that is conflicting with the new HP. It's a WAP2 Personal with AES Encryption (did not work on that one), where as my network is a WPA Personal with TKIP Encryption (worked on this one). Will that make a difference and if so what do I do about it?
View 4 Replies
View Related
Feb 18, 2012
I have a laptop (win7) and desktop (vista) in a network. The laptop is wireless and the desktop is hard-wired into a d-link router. My computer recently updated and since then I cannot connect to my desktop from my laptop. The desktop shows up in the network map but when I click it, it hangs and says "network path not found". I can ping the IP and the name of the PC from command line but I cannot access it. I have internet connectivity the whole time regardless and I've tried multiple routers.
View 16 Replies
View Related
Nov 25, 2012
I have recently become the proud owner of a Sony Xperia P which I would to be able to connect to Wifi in my bedroom. Unfortunately, as my router's WLAN isn't strong enough to reach my room (I get internet on my laptop via ethernet cable) I need to use my laptop as a hotspot to be able to connect my phone. So I set up an ad-hoc network to share my laptop's internet connection via its own Wifi. I'm pretty confident I followed all the required steps accurately (enabled LAN connection sharing, etc), but when I try to connect to my new ad-hoc network on my laptop's list of wireless networks, I just get indefinitely stuck in the "Waiting for the network..." stage. I also tried with WEP security disabled, so no key was required, but to no avail. I know the laptop's wifi works fine as I can connect to my router (when in range) without a problem. Needless to say, my ad-hoc network is also not yet appearing on my phone's wifi connections.Running XP SP3, with Intel Wifi Link 5100 AGN.
View 3 Replies
View Related
May 17, 2012
I am trying to connect to the internet using an external wireless device (Netgear model:MA101), I have managed to install the drivers and my wireless network is coming up as an option! For some bizarre reason when I try and connect the following messages appears: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try again"I then refresh and try to connect but the message constantly appears I have rebooted my computer in case it needs to reset after installing the driver for the wireless device.
View 2 Replies
View Related
Feb 27, 2012
Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies
View Related
Dec 3, 2012
I have a server webpage hosted on a local linux machine. I can access it by typing the I.P. into my address bar from another computer on the same network.way to connect to my computer on my home network from a computer not on my network.
View 1 Replies
View Related
Sep 10, 2011
My Windows XP computer cannot connect to the wirless connection. It used to work before but we installed a new router in our home when I try connecting to the network, it tries to connect but it refreshes and doesnt connect to the internet
View 4 Replies
View Related
Aug 18, 2011
I have a wireless network. For some reason my computer seemed to change regarding the settings, and I can't figure out what to do. Usually I can figure things out when the settings go wrong. I have a broadband connection, where it seems to want me to enter a phone number; I have a "LAN or High Speed" connection. Normally I click "Create New Connection", but it doesn't work.
View 5 Replies
View Related
Jul 18, 2011
I have a computer on a school network, i recently set up a WDS server to make rebuilding computers allot easier and faster. I created an image for a Inspiron Desktop 560ST but when i tried to redeploy the image back on the exact same computer while connecting to WDS deployment service i get this error.
<Installing windows>WdsClient: An error Occured while obtaining an IP address from the DHCP server. check to ensure that there is an operational DHCP server on this network segment.
[code]....
Our default IP is not a 169.xxx.xxx.xxx it is 172.xxx.xxx.xxx so thats obviously not right, and then I try typing ipconfig /renew and it waits a super long time and then i get Windows IP Configuration:An Error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.An error occurred while releasing interface LoopBack Pseudo-Interface 1 : The system can not find the file specified. This computer is part of a lab of about 25 computer and every other computer has no problems, even if i take the network cable out of this computer and plug it into the computer right next to it(I'm take it right from one computer to another, i'm not touching the switch end) the computer right next to it is fine. So its not the switch or the cable.
View 2 Replies
View Related
Oct 24, 2012
So I'm currently running window 7 on my msi GT683-R. As of yesterday my internet stopped working, however only on my msi. I'm currently typing this on a borrowed mac using the same network that doesn't work on the other device. It also works on my iPhone. The problem is, neither the wifi nor the wired works on my MSI. I made sure DHCP was on, ran a TCP/IP stack reset, a winsock reset, have restarted my computer/router multiple times, and disabled bonjour but nothing seems to work.
View 6 Replies
View Related
Feb 4, 2011
how to connect a computer to other computer using network cable?
View 3 Replies
View Related
Jan 5, 2013
I have a Belkin 150 router connected to my modem. I use the wifi in my room. But recently I messed up in the router's page which i dont remember. Now I can't connect my computer to my own network. I am using my friend's network right now. The conenction is shown as "Limited." All the solutions say to type one IP adress or the other to the browser but when connection to my router is not there.
View 1 Replies
View Related
Dec 1, 2012
I have a wireless router. The first time I connected my computer to it, it worked. I went in to change the network password, and after that, it stopped working. Every single other device I have will connect, including other laptops, but this one won't. In the network and sharing center it shows that my network is available, but it will not connect. I have tried everything I can think of. I have looked all over the internet, nd still can't figure it out!!!! My computer's wifi IS on so its not that. The only thing that the trouble shooter tells me to do is unplug the router and restart it and that has not worked after several tries. Also is there a way to reset the computers recognition of networks? Im wondering if that would work if I could completely restart the process again, but I dont know how to get to that. I have a dell inspiron with windows 7.
View 1 Replies
View Related
Feb 7, 2013
From our Exchange server, I am completely unable to communicate with one of our partner's mail server. I cannot ping it by either the host name or IP address. Trace route times out at the final hop. The firewall is disabled, and antivirus (ESET) is temporarily disabled. I cannot access the IP through the web browser either, everything times out.However, every other computer on our network can connect fine. I haven't seen any other problems with any other IP addresses, it seems to be only this one that I can't connect to, and only from our Exchange server. All computers are going through the same gateway, using the same internet connection, and using the same DNS servers.The computer that I'm having the problem on is a static IP. All settings look correct, and match another server that I can access the IP from.I've checked the hosts file for anything, and it is in it's default state.
View 1 Replies
View Related
Nov 2, 2011
I have just moved apartments and am trying to connect to the internet. The problem is that I can see the network I need to connect to and I am putting in the correct network key but it just won't let me connect to it. There are three other computers using the wireless so it isn't the modem... and my iPhone is working on it. I am wondering if it has something to do with the IP... I do not really understand any computer stuff but I am desperate for this to be fixed because I am in the middle of mid-terms.
View 2 Replies
View Related
May 12, 2012
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
View 3 Replies
View Related
May 6, 2011
I have a desktop and laptop and im on my desktop which has internet...I have a wireless router that is working and its called:NETGEAR WIRELESS-N 150 ROUTER WNR1000V2. The router network comes up on my laptop when I look for avaliable networks but..I try to connect and type in the exact password for the router but says "windows cannot connect to network" On my laptop im running windows vista home premuim service pack 2. This all starte 2 days ago when i knocked the outlet out that ha the power to our computer and i tuned it on and my laptop wont connect
View 5 Replies
View Related
Jun 23, 2011
The computer I am using won't connect any of the routers I've tried (one innoband and two sonicwall tz100's, all of which work with other computers), even though it does connect to the internet through the ethernet port. It is a Dell optiplex 980
View 1 Replies
View Related
Jan 30, 2012
i am unable to connect to some lan computers in my office. when i go to start ---> Run ---> \192.168.0.24 or else...(lan computer ip) after 10/15 seconds a popup window comes and says (network path not found). but some systems i can easily access through this procedure
View 12 Replies
View Related
Jan 29, 2013
my computer cannot connect to the internet, and there are unidentified network in my computer.
i hve attach a image for my ipconfig.
View 3 Replies
View Related
Sep 28, 2012
I am trying to transfer files from my laptop to my desktop, but when I open the 'network' folder from the start menu to access the desktop from the laptop, the desktop computer is not shown. I ensured that the workgroup names are the same, all sharing is turned on on both computers in Network and Sharing Center, since it is a private network, I checked the router settings and nothing seems to be wrong. The desktop is running Windows Vista Business x86 and the laptop is running Windows 7 Home Premium x64, so there is no way to make a Homegroup connection. However, I can see the laptop computer from the desktop's network folder. I click on it to gain access, but I get an error message: "Network Error, Windows cannot access \****-PC, check the spelling of the name. Otherwise, there might be a problem with your network. Error code: 0x80070035 The network path was not found." have checked all wiring, router settings, and nic card settings, have done a successful ping, even Network and Sharing Center, I have also checked sharing permissions and permission levels, I see nothing that could possibly affect the access of the computers.
The only thing I can think of is that when I click on the 'Network ID' button under the Computer Name tab in System Properties on the desktop, it asks join a domain or workgroup, it will not let me save the selection "This is a home computer; it's not part of a business network," that may or may not be the issue, because it will only remain on "This computer is part of a business network" probably because I am running Windows Vista Business.
View 7 Replies
View Related
May 1, 2011
I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies
View Related
Apr 19, 2011
I have just reformatted my windows 7 ultimate. I have installed the Ethernet driver that came in the motherboard utilities CD. But the problem is computer is not picking up my network and its just saying unidentified public network and i cannot connect to the internet.The modem i use is Netgear cable voice gateway CVG824G. The connection is cable internet.
View 3 Replies
View Related
Jan 28, 2011
I have a desktop and 2 laptops connected to a wireless router on my home network. I used to be able to get internet access on all 3 computers, but suddenly one day I can't get on the internet on my desktop. The 2 laptops have no problem getting on. I am at a total loss as to what to do. I am really good with computers, but networking is all new to me
View 14 Replies
View Related
