Connect Computer To Other One Using Network Cable?
Feb 4, 2011how to connect a computer to other computer using network cable?
View 3 Replies
ADVERTISEMENT
Why Won't Computer Connect To Cable Modems
Dec 28, 2012I Just switched from DSL to Charter Communications Cable internet. For some reason my computer wont see the internet. I plug the same cord into my brothers computer and the internet works just fine. I plug the same cord back into the DSL and i have internet. I have done troubleshooting and it finds this problem (Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. I switched to a different cable modem same exact situation. Works on my brothers but not mine. My computer is a much newer and more capable computer then his. When we activated the internet we did it on his computer, but before we switched to charter i plugged the modem in without internet and it seemed to have the same problem. I just got more results on his as it immediately directed my to the charter page at that time. On mine i got nothing. ( Also i believe my brother said that it did work on my computer for a few minutes at first but i'm not 100% on that.)
View 1 Replies View Related784 - Router Won't Connect To Computer Over Cable
Sep 7, 2012I have a Thompson 784 router that connects to the Internet. It works nicely enough.What is wrong is that I have a shielded Cat 5e cable that goes from my room to the router that's in a another room (~30 metres). Both ends are the same; both ends are done nicely; I've tested it with a cable tester and every wire connects. However, when i connect my computer to my router neither one will find the other.
View 1 Replies View RelatedComputer Doesn't Like Network Cable
Apr 6, 2011i have a computer at my company that is wired in to the network. we upgraded the core switches a while back and lost connection with the computer. i personally traced the connection back and it is plugged into the switch, but i still get no link lights on the NIC. that network drop and cable work for any other computer or laptop i plug it in to, and the problem computer in question works on any other cable/drop.
View 12 Replies View RelatedBroadband :: Direct Connect Cable Modem To Computer?
Jan 7, 2011I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies View RelatedConnect Laptop To Desktop Computer Using Simple Cable?
Dec 5, 2011I have laptop or desktop both computers and i want to share my desktop matter in my laptop or laptop matter in my desktop without using any modem by the using of a simple cores cable? how i can handle it..
View 1 Replies View RelatedConnect Laptop To Computer Using Ethernet Crossover Cable?
Jul 30, 2011i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro
View 1 Replies View RelatedNetwork Cable - Unable To Get Computer Recognized
Sep 15, 2011This will be rather difficult as i'm on a cell phone. Anyways i'm unable to get my computer to recognize that an ethernet cable is connected. I know that the cable is good is i've used it with my girlfriends computer with on problems. I've blowed out the port, used two different cords. Apart from connecting to the internet (which i can't atm) i have no idea what to do.
View 12 Replies View RelatedNetwork Printer And Computer Share Same Cat 5 Cable?
May 3, 2011I have a network printer that I would like to use in a room away from the router. Can I use an RJ45 splitter so these two devices can share the same cable? It doesn't have wireless capability.
View 11 Replies View RelatedComputer Does Not Connect To Internet Through Router Only Directly Through Cable Mode
Jul 18, 2011I cannot connect to the internet via my router. The router is functioning properly two other computers in the house use the router one though Ethernet cable and the other one connects wireless. Things I have done while trying to figure out the problemMade sure all windows updates were up to date Scanned for viruses and malware (none were found) Uninstall the network adapter Made sure the network adapter driver were up to date
I have noticed that when I plug the Ethernet cable from the router to the computer the led on the back of the computer panel does not blink as it does when I route directly from he cable modem.
Routers / Switches :: Computer Say Network Cable Unplugged?
Jun 14, 2011my modem is working, I have two computers on the router plus my wireless is working.I connected my cable that was going from the modem to the router directly to the computer and it still says "network cable unplugged"sis 900 based PCI fast internet?
View 3 Replies View RelatedWhat Makes A Computer / Laptop Not To Detect A Hardware Network Cable
Oct 15, 2011I tried connecting someone else's laptop to a network cable but the laptop refused to detect the hardware device plugged?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N-AU LAN Computer Cannot Ping Computer
Oct 8, 2008I just got a WAG160N-au, I run the installation disk, follow the procedures. I got the internet connection.
View 9 Replies View RelatedHome Network :: Computer Won't Re-connect Network Drives
Mar 13, 2011I have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI...
1 computer - Windows Vista Home Premium
1 computer - Windows XP Home
Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
New Computer Will Not Connect To A Particular Network
Dec 20, 2011new HP 2000 computer he just purchased. I brought it to my house to set it up. No problems connecting to wifi at my home. Downloaded all the updates and got it ready for his house. When I tried connecting to his network, it kept giving me the network key. I know I was entering the correct information because we had his older computer and I copied the exact thing. I had also made a folder when I set up his other computer with his information for his network in it and I was going by that. I tried to automatically connect and I also tried to manually connect. I deleted the name of my network (that worked) and rebooted. It continually gives me the block to put the password in. I brought it back to my house and the wifi connected with no problems. His old toshiba had no problems connecting to his network. I disconnected it and reconnected it. Is there something about the settings I am not doing? Or is it a firewall setting? Is there something in the modem that is conflicting with the new HP. It's a WAP2 Personal with AES Encryption (did not work on that one), where as my network is a WPA Personal with TKIP Encryption (worked on this one). Will that make a difference and if so what do I do about it?
View 4 Replies View RelatedCan't Connect To Network Computer
Feb 18, 2012I have a laptop (win7) and desktop (vista) in a network. The laptop is wireless and the desktop is hard-wired into a d-link router. My computer recently updated and since then I cannot connect to my desktop from my laptop. The desktop shows up in the network map but when I click it, it hangs and says "network path not found". I can ping the IP and the name of the PC from command line but I cannot access it. I have internet connectivity the whole time regardless and I've tried multiple routers.
View 16 Replies View RelatedComputer Will Not Connect To Own Ad-hoc Network
Nov 25, 2012I have recently become the proud owner of a Sony Xperia P which I would to be able to connect to Wifi in my bedroom. Unfortunately, as my router's WLAN isn't strong enough to reach my room (I get internet on my laptop via ethernet cable) I need to use my laptop as a hotspot to be able to connect my phone. So I set up an ad-hoc network to share my laptop's internet connection via its own Wifi. I'm pretty confident I followed all the required steps accurately (enabled LAN connection sharing, etc), but when I try to connect to my new ad-hoc network on my laptop's list of wireless networks, I just get indefinitely stuck in the "Waiting for the network..." stage. I also tried with WEP security disabled, so no key was required, but to no avail. I know the laptop's wifi works fine as I can connect to my router (when in range) without a problem. Needless to say, my ad-hoc network is also not yet appearing on my phone's wifi connections.Running XP SP3, with Intel Wifi Link 5100 AGN.
View 3 Replies View RelatedConnect Computer On Home Network
Dec 3, 2012I have a server webpage hosted on a local linux machine. I can access it by typing the I.P. into my address bar from another computer on the same network.way to connect to my computer on my home network from a computer not on my network.
View 1 Replies View RelatedXP Computer Cannot Connect To Wireless Network?
Sep 10, 2011My Windows XP computer cannot connect to the wirless connection. It used to work before but we installed a new router in our home when I try connecting to the network, it tries to connect but it refreshes and doesnt connect to the internet
View 4 Replies View RelatedComputer Can't Connect To Wireless Network
Aug 18, 2011I have a wireless network. For some reason my computer seemed to change regarding the settings, and I can't figure out what to do. Usually I can figure things out when the settings go wrong. I have a broadband connection, where it seems to want me to enter a phone number; I have a "LAN or High Speed" connection. Normally I click "Create New Connection", but it doesn't work.
View 5 Replies View RelatedCannot Connect To DHCP On A Network Computer
Jul 18, 2011I have a computer on a school network, i recently set up a WDS server to make rebuilding computers allot easier and faster. I created an image for a Inspiron Desktop 560ST but when i tried to redeploy the image back on the exact same computer while connecting to WDS deployment service i get this error.
<Installing windows>WdsClient: An error Occured while obtaining an IP address from the DHCP server. check to ensure that there is an operational DHCP server on this network segment.
[code]....
Our default IP is not a 169.xxx.xxx.xxx it is 172.xxx.xxx.xxx so thats obviously not right, and then I try typing ipconfig /renew and it waits a super long time and then i get Windows IP Configuration:An Error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.An error occurred while releasing interface LoopBack Pseudo-Interface 1 : The system can not find the file specified. This computer is part of a lab of about 25 computer and every other computer has no problems, even if i take the network cable out of this computer and plug it into the computer right next to it(I'm take it right from one computer to another, i'm not touching the switch end) the computer right next to it is fine. So its not the switch or the cable.
Computer Unable To Connect To Network
Oct 24, 2012So I'm currently running window 7 on my msi GT683-R. As of yesterday my internet stopped working, however only on my msi. I'm currently typing this on a borrowed mac using the same network that doesn't work on the other device. It also works on my iPhone. The problem is, neither the wifi nor the wired works on my MSI. I made sure DHCP was on, ran a TCP/IP stack reset, a winsock reset, have restarted my computer/router multiple times, and disabled bonjour but nothing seems to work.
View 6 Replies View RelatedBelkin Can't Connect Computer To Own Network
Jan 5, 2013I have a Belkin 150 router connected to my modem. I use the wifi in my room. But recently I messed up in the router's page which i dont remember. Now I can't connect my computer to my own network. I am using my friend's network right now. The conenction is shown as "Limited." All the solutions say to type one IP adress or the other to the browser but when connection to my router is not there.
View 1 Replies View RelatedComputer Shows That The Network Is Available But Won't Connect
Dec 1, 2012I have a wireless router. The first time I connected my computer to it, it worked. I went in to change the network password, and after that, it stopped working. Every single other device I have will connect, including other laptops, but this one won't. In the network and sharing center it shows that my network is available, but it will not connect. I have tried everything I can think of. I have looked all over the internet, nd still can't figure it out!!!! My computer's wifi IS on so its not that. The only thing that the trouble shooter tells me to do is unplug the router and restart it and that has not worked after several tries. Also is there a way to reset the computers recognition of networks? Im wondering if that would work if I could completely restart the process again, but I dont know how to get to that. I have a dell inspiron with windows 7.
View 1 Replies View RelatedCan't Connect To External IP From Just One Computer On Network
Feb 7, 2013From our Exchange server, I am completely unable to communicate with one of our partner's mail server. I cannot ping it by either the host name or IP address. Trace route times out at the final hop. The firewall is disabled, and antivirus (ESET) is temporarily disabled. I cannot access the IP through the web browser either, everything times out.However, every other computer on our network can connect fine. I haven't seen any other problems with any other IP addresses, it seems to be only this one that I can't connect to, and only from our Exchange server. All computers are going through the same gateway, using the same internet connection, and using the same DNS servers.The computer that I'm having the problem on is a static IP. All settings look correct, and match another server that I can access the IP from.I've checked the hosts file for anything, and it is in it's default state.
View 1 Replies View RelatedNetgear - Cannot Connect Computer To Network
Jan 17, 2011I try to maintain a sizable network at my workplace. We have 10 desktops, 3 laptops (sometimes more) 4 printers/fax, etc.etc. I have just ordered a new HP Pavilion Slim-line S5000 Series with Windows 7 Pro. I cannot get it to connect to the Network. I have set up the server (which runs windows server 2008) with an account called "communications" I have named the computer "communications". I go to the system and security>system: computer name,domain, workgroup settings>change settings. I enter all the information correctly, and it tells me it cannont find the network path. This is happening on this brand new computer, and our old dell optiplex 760 (running windows vista pro). We use a netgear pro-safe 24 port 10/100 switch hub, and a linksys wireless G broadband router model WRT54GS.
View 10 Replies View RelatedWireless Network Available But Computer Will Not Connect
Nov 2, 2011I have just moved apartments and am trying to connect to the internet. The problem is that I can see the network I need to connect to and I am putting in the correct network key but it just won't let me connect to it. There are three other computers using the wireless so it isn't the modem... and my iPhone is working on it. I am wondering if it has something to do with the IP... I do not really understand any computer stuff but I am desperate for this to be fixed because I am in the middle of mid-terms.
View 2 Replies View RelatedHome Network :: Computer Does Not Connect To Router?
Jun 23, 2011The computer I am using won't connect any of the routers I've tried (one innoband and two sonicwall tz100's, all of which work with other computers), even though it does connect to the internet through the ethernet port. It is a Dell optiplex 980
View 1 Replies View RelatedHome Network :: Unable To Connect To Lan Computer?
Jan 30, 2012i am unable to connect to some lan computers in my office. when i go to start ---> Run ---> \192.168.0.24 or else...(lan computer ip) after 10/15 seconds a popup window comes and says (network path not found). but some systems i can easily access through this procedure
View 12 Replies View RelatedUnidentified Network In Computer - Cannot Connect To The Internet
Jan 29, 2013my computer cannot connect to the internet, and there are unidentified network in my computer.
i hve attach a image for my ipconfig.
Cannot Connect Or Share Files With Other Computer On Same Network
Sep 28, 2012I am trying to transfer files from my laptop to my desktop, but when I open the 'network' folder from the start menu to access the desktop from the laptop, the desktop computer is not shown. I ensured that the workgroup names are the same, all sharing is turned on on both computers in Network and Sharing Center, since it is a private network, I checked the router settings and nothing seems to be wrong. The desktop is running Windows Vista Business x86 and the laptop is running Windows 7 Home Premium x64, so there is no way to make a Homegroup connection. However, I can see the laptop computer from the desktop's network folder. I click on it to gain access, but I get an error message: "Network Error, Windows cannot access \****-PC, check the spelling of the name. Otherwise, there might be a problem with your network. Error code: 0x80070035 The network path was not found." have checked all wiring, router settings, and nic card settings, have done a successful ping, even Network and Sharing Center, I have also checked sharing permissions and permission levels, I see nothing that could possibly affect the access of the computers.
The only thing I can think of is that when I click on the 'Network ID' button under the Computer Name tab in System Properties on the desktop, it asks join a domain or workgroup, it will not let me save the selection "This is a home computer; it's not part of a business network," that may or may not be the issue, because it will only remain on "This computer is part of a business network" probably because I am running Windows Vista Business.
Can't Connect To Server - Remote Computer Not Available On Network
May 1, 2011I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies View RelatedComputer Is Not Picking Up Network / Cannot Connect To Internet
Apr 19, 2011I have just reformatted my windows 7 ultimate. I have installed the Ethernet driver that came in the motherboard utilities CD. But the problem is computer is not picking up my network and its just saying unidentified public network and i cannot connect to the internet.The modem i use is Netgear cable voice gateway CVG824G. The connection is cable internet.
View 3 Replies View Related