Connect Huawei B269a To Netgear Network?
Sep 6, 2011
I have a Pre-existing repeating netgear network of a WNR2200 router set up as a base station with a harddrive plugged into it as a network device (readyshare) and another WNR2200 router set up as a repeater.
I want to supply this network using Huawei B260a modem (on the Three network).
I currently have this setup; The b260a IP is 10.0.0.1 subnet 225.225.225.0 and has DHCP turned on (range 10.0.0.100 - 10.0.0.200). This is plugged into the internet lan port of the base station wnr2200. The base station IP is 192.168.1.1 subnet 225.225.225.0 and has DHCP turned on (range 192.168.1.2 - 192.168.1.254) The repeater Wnr2200 is automatically an access point and has an IP of 192.168.1.254
This setup works but the speeds are around 1-2mb slower when connected to the netgear network than if connected directly to the B260a.
View 2 Replies
ADVERTISEMENT
Sep 11, 2012
I recently got a new laptop, but it won't connect to my network. All my other devices do and all my roommates hadn't experience any problems either. My laptop can also connect to the network of my school. My laptop is a HP Elitebook 8560w with windows 7 Enterprise SP 1(64-bit). I believe my router is a Huawei HG655D.
View 1 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
Apr 17, 2011
I am using a USB Modem from HUAWEI Technologies to use internet when im not on a wifi zone.. The Internet Speed is kinda slow (512 kbps), so I configured my browser to go through a proxy to make it a lil bit faster (2mbps now)..Everything works fine except that I couldn't connect to https sites (gmail, facebook, eBay, etc)
View 3 Replies
View Related
Jan 17, 2011
I try to maintain a sizable network at my workplace. We have 10 desktops, 3 laptops (sometimes more) 4 printers/fax, etc.etc. I have just ordered a new HP Pavilion Slim-line S5000 Series with Windows 7 Pro. I cannot get it to connect to the Network. I have set up the server (which runs windows server 2008) with an account called "communications" I have named the computer "communications". I go to the system and security>system: computer name,domain, workgroup settings>change settings. I enter all the information correctly, and it tells me it cannont find the network path. This is happening on this brand new computer, and our old dell optiplex 760 (running windows vista pro). We use a netgear pro-safe 24 port 10/100 switch hub, and a linksys wireless G broadband router model WRT54GS.
View 10 Replies
View Related
Oct 3, 2012
I moved into a new apartment in Mexico City a month ago. The internet, already installed when I moved in, comes through a device called a Huawei EchoLife HG8427. For the first month of my residence, the internet worked perfectly. Suddenly, on a recent day, I was no longer able to connect to the internet, though I was still connected to the network. This problem has persisted for some time now.I have tried just about everything that I know how to, including restarting the modem, fiddling with my IPv4/6 settings, disabling/enabling my connection, disabling my firewall, ipconfic/flushdns/registerdns, ipconfig/reset/renew, and probably a few other things that I have now forgotten.
My computer, a Toshiba NB505 running Windows 7 Starter 32-bit, has no problem connecting to the internet via other networks. Ping tests show that I am indeed connected to the network and have no OS problems. I do not have any McAffee software (I read somewhere that this was a problem for some people). I cannot do a hard reset because the modem does not belong to me and serves several other people living here (this is sort of a short-stay guesthouse). This afternoon, the map on my network and sharing center briefly showed a successful internet connection (for about 10 minutes). During that time, however, I was still unable to connect to the internet and when I restarted my computer, it was back to showing a broken connection.Windows IP Configuration
Host Name . . . . . . . . . . . . : jmhc-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No [code].....
View 1 Replies
View Related
Apr 13, 2013
Region : Sweden
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Telia
The router finds the 4G modem Huwei E392u-12 but could not connect. Sometimes it also drops the modem and it says "Unplugged"
I tried to update the firmeware but no success.
View 5 Replies
View Related
Oct 15, 2012
I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.
View 1 Replies
View Related
Apr 20, 2012
I currently own 2 wifi routers which have 4 lan ports on the back. In my room i have two desktops without wireless capability. I was wondering is it possible to have one router in my room which my desktops plug into - and then the router to ""Bridge" with the one downstairs to give me wireless capability. I believe its called bridging but i have had no hopen as of yet. Huawei HG520b and Huawei HG532 are my two routers. I know this can be done by purchasing a wire - but i cannot afford a 100m cable and i am not particularly interested in purchasing an adapter for my desktops.
View 6 Replies
View Related
Nov 26, 2012
i have Huawei 8066 video conference Terminal, and i want to have a video conference point to point using the internet, so how to set the connection ?
View 3 Replies
View Related
Dec 3, 2011
Im running W7 64 bit and i have a netgear wna1000 and it detects networks but wont connect to them
View 5 Replies
View Related
May 17, 2012
I am trying to connect to the internet using an external wireless device (Netgear model:MA101), I have managed to install the drivers and my wireless network is coming up as an option! For some bizarre reason when I try and connect the following messages appears: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try again"I then refresh and try to connect but the message constantly appears I have rebooted my computer in case it needs to reset after installing the driver for the wireless device.
View 2 Replies
View Related
Feb 27, 2012
Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies
View Related
Jul 2, 2011
My ISP provided me with a new Huawei HG521 router today and I'm trying to get our 4 family PCs to get along nicely through it.So far, one Windows 7 (SysInfo log below) and one XP machine are getting along really sweetly, with the XP printing through the W7's printer.But the 2nd W7 machine sees the 1st W7 machine, but doesn't see its printer.And the sole Vista machine connects to the internet but doesn't see either of the W7 machines, or the XP machine. [code]
View 9 Replies
View Related
Jan 24, 2013
My company thus cuts off my subscription before the month ends.My family and I use a total of 8 devices on our home wireless network; 3 laptops, 4 iPads, and a Galaxy phone.My router/modem home page shows me the total amount used by all users.. I use a huawei LTE B593 router.
View 2 Replies
View Related
May 12, 2012
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
View 3 Replies
View Related
May 6, 2011
I have a desktop and laptop and im on my desktop which has internet...I have a wireless router that is working and its called:NETGEAR WIRELESS-N 150 ROUTER WNR1000V2. The router network comes up on my laptop when I look for avaliable networks but..I try to connect and type in the exact password for the router but says "windows cannot connect to network" On my laptop im running windows vista home premuim service pack 2. This all starte 2 days ago when i knocked the outlet out that ha the power to our computer and i tuned it on and my laptop wont connect
View 5 Replies
View Related
Feb 15, 2012
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies
View Related
Jun 24, 2012
when i click on connect to network nothing happens. it doesn't do anything, but if i plug in my old router it will connect just fine. It's just the new router
View 1 Replies
View Related
Jul 10, 2011
Netgear FS605 v3 wont connect to both my ps3 and my pc. It can only get internet to either my pc or my ps3.
View 1 Replies
View Related
Mar 11, 2012
I have a functioning wireless network at home, but I can't get my computer to connect to the internet. I bought a new wireless usb adaptor (Netgear N-150, WNA1100VC) and tried to install it. The computer at first connected to the internet, but the next day it did not. I unistalled the software and tried to reinstall it, but I got an error message saying the driver was not digitally signed and I should contact the provider. I have done this, and Netgear have given me instructions on how to fix. The problem is that now when I packed up my computer and re-assembled so I can plug the ethernet cable directly into it, I still can't connect to the internet.I get a message saying I'm connected to the wireless network, but can't connect to the internet.When I click on the "Diagonose Problem" it says the following:Windows Network Diagnostics Window.There might be a problem with one or more network adaptors on this computer
1. The network adaptor "Realtek RTL8168C (P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)" is experiencing driver or hardware related issues
2. Make sure your internet protocol bindings are correct - Ensure that "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" are selected in the configuration for the network adaptor "Local Area Connection"[code]
View 8 Replies
View Related
Nov 5, 2011
how do i connect xbox 360 to the NETGEAR
View 1 Replies
View Related
Jul 20, 2012
i have two computers in my house, the main one is connected to the internet with a Netgear N600 router. Computer 2 connects to that connection wirlessly with a D-link adapter.However after i reinstalled the OS to the main one, computer 2 suddenly is unable to even see the connection. i checked my smartphone which also used to connect when i was home and that can't see the connection either.
View 1 Replies
View Related
Aug 9, 2011
I buy the Huawei K3765 USB Modem (unlocked, so I can use all operators).
After I plugged it in, it installed the Mobile Partner Software succesfully. The phone and SMS function is running well. I can call and text someone through the modem.
But the problem is when I tried to connect to the internet it shows error message:
Error 31: A device attached to the system is not functioning
I have tried the modem on another computer (Windows XP and Windows 7 Home Premium 32 bit too) and it worked well. For information my notebook is ASUS K42JR, OS Windows 7 Home Premium 32bit.
View 5 Replies
View Related
Jul 20, 2011
I have BSNL optical fiber broadband connection with Huawei EchoLife HG850a ONT. I want to configure my ONT to control internet access of any individual system which is connected to this ONT by switch.
View 2 Replies
View Related
Jun 11, 2012
I have connected Huawei switch with Cisco switch using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side..
View 2 Replies
View Related
Jan 12, 2011
i have a wa1003a wifi modem and the light of wireless is working but no range is shown by my laptop?
View 8 Replies
View Related
Jun 6, 2011
I can connect to the internet using a huawei dongle on three mobile broadband. But recently having trouble loading web pages. I get the message- dns server isn't responding. I have contacted three who changed settings on my pc through remote access, but I still have the problem although it doesn't seem as bad, i can view more web pages before getting the error message.
[code]....
View 14 Replies
View Related
Feb 22, 2011
Have a netgear WNR854T with three access points connect to the router. The problem I am having for example is the access point is not letting me get on the internet. I have to keep turning off and on the router then the wireless access point work fine.
View 1 Replies
View Related
Dec 30, 2012
N900, WNDR4500, works fine as long as broadcasting SSID on 2.4, but if broadcasting SSID is turned off neither of wireless computers (windows 7 & 8) will reconnect.
View 1 Replies
View Related
Jun 6, 2011
In Room 1 Computer 1 and computer 2 are connected to the Verizon box via ethernet cables using port LAN 1 & LAN 2.In Room 2 I have Computer 3 connected to the Verizon box using Wireless I then added a ethernet cable into Computer 3 that goes into a Netgear box the ethernet cable goes into the Internet port I then run a ethernet cable into port 1 in the netgear box into the Xbox 360 and on computer 3 I bridge the wireless and LAN connection this then lights up the netgear box showing Internet and Gives the Xbox internet connection but Computer 3 shows and will not connection to the internet just that it is on the LAN network.
View 6 Replies
View Related
May 8, 2011
We recently connected the Netgear WNR2000 to our modem. All wireless devices connect just fine, except for our Roku XD. It says there is an activation error. I've reset the box, unplugged, changed the channel via wireless settings. What's next??? I'm quite frustrated and would like to get this to work. The message I get is "activation issue. There was a problem connecting to the Roku server". Argh!! It was working fine with the other wireless modem/router (versalink 327W), but it kept going off (as in the signal would drop and we would have to turn it off/on to get it to work) and connected the netgear router to it today.
View 5 Replies
View Related
Aug 26, 2011
I have Windows 7 64 bit.I bought a Netgear DGN2000 approximately two years ago. It is working well.Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).I worked on my desktop this morning, uninstalled some programmed, but must have uninstalled a driver or something.I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point.If I troubleshoot, it states “Windows do not detect a properly installed network adaptor.
View 3 Replies
View Related
