Getting Huawei Wa1003a Wireless Setup?
Jan 12, 2011i have a wa1003a wifi modem and the light of wireless is working but no range is shown by my laptop?
View 8 Repliesi have a wa1003a wifi modem and the light of wireless is working but no range is shown by my laptop?
View 8 RepliesI am connected to the internet using a Huawei wireless USB modem connected to my desktop computer(no other type of service available) I would like to set up a Wifi home network so that I can connect using Wifi to all of the other gadget that I have in the house. So the question is can I connect a Wifi router using a ethernet cable comming from my desktop computer? and if so what router would you recommend for this application?
View 4 Replies View RelatedI just bought a Huawei E586 Mifi from 3 network in the UK and installed a 32GB micro-SD card. I want to be able to access this card wirelessly, but the "dashboard" (web interface control panel) that is installed doesn't have an option for the SD card. I have seen dashboards on the Internet and also a video on Youtube that do have this option, so I know this can be done.
View 9 Replies View RelatedHow do I get the password for for the Huawei EchoLife HG520s Wireless Broadband Router,there is no indication on back of said Router.
View 1 Replies View RelatedI tried to bridge two wireless routers wirelessly, but after extensive research I came to the conclusion that this wasn't possible.
Now I am trying to connect these two routers through a cat5 cross-over cable and I wanted to know whether can I disable DHCP on the router which has internet, and enable the DHCP of the router which is connected to the printers, because I have a few systems that shouldn't be connected to the internet.
What I had in mind is if I switch the DHCP OFF on the internet router and turn it ON on the Huawei B683 router, I could add those devices' MAC addresses to the internet gateway router to deny them access to the internet..?
I have set up my linksys in my main hall, i get a decent wifi signal in my room. But i get very very poor signals on my phones (bb9780 and Samsung S2). I bought a Huawei WS320 wifi repeater. how to connect these two so that i can get a strong enough signal in my room ?
View 2 Replies View RelatedI buy the Huawei K3765 USB Modem (unlocked, so I can use all operators).
After I plugged it in, it installed the Mobile Partner Software succesfully. The phone and SMS function is running well. I can call and text someone through the modem.
But the problem is when I tried to connect to the internet it shows error message:
Error 31: A device attached to the system is not functioning
I have tried the modem on another computer (Windows XP and Windows 7 Home Premium 32 bit too) and it worked well. For information my notebook is ASUS K42JR, OS Windows 7 Home Premium 32bit.
I have BSNL optical fiber broadband connection with Huawei EchoLife HG850a ONT. I want to configure my ONT to control internet access of any individual system which is connected to this ONT by switch.
View 2 Replies View RelatedI have connected Huawei switch with Cisco switch using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side..
View 2 Replies View RelatedI can connect to the internet using a huawei dongle on three mobile broadband. But recently having trouble loading web pages. I get the message- dns server isn't responding. I have contacted three who changed settings on my pc through remote access, but I still have the problem although it doesn't seem as bad, i can view more web pages before getting the error message.
[code]....
I am using a USB Modem from HUAWEI Technologies to use internet when im not on a wifi zone.. The Internet Speed is kinda slow (512 kbps), so I configured my browser to go through a proxy to make it a lil bit faster (2mbps now)..Everything works fine except that I couldn't connect to https sites (gmail, facebook, eBay, etc)
View 3 Replies View RelatedI have a Huawei E583C Mobile Modem but cannot forward some ports needed for a game (Civilization 4), specifically port 2056. Im on a windows XP and have disabled that firewall and dont have any other firewall. Ive also logged into the modem with the standard IP but unlike my linkys router in another pc, I can't find the open port section. [code]
View 10 Replies View RelatedI have just installed a new router, a HUAWEI HG533 I am not able to connect wirelessly with my Acer Aspire 5520 (with Vista home premium).I can connect my new router using the ethernet cable, and last time I tried my old router would connect wirelessly.If I hover over the network icon, it says 'Unidentified Acess:local only'My smartphone (and my wifes) will connect (but oly mine to the old router!).I have tried removing the microsoft 6to4 adapters (suggested on another forum) this didn't work. (I then re-installed, no better).I've had a look at other posts on this forum, and Have done a couple of the tests suggested (wireless and mini toolbox, which I will post separately as it exceeds 20000 characters!)I have tried support from my ISP (who also supplied the router) and got a generic email in response, no luck.
View 14 Replies View RelatedHow can I port forward correctly and make a port checker say it is open? I wan't to open port 82.
View 1 Replies View RelatedIf you are familiar with the Huawei HG520s router, I want to filter an ip range (ex. 192.168.1.10 to 192.168.1.255) so that no other users can connect on this ip range and start using the router.
View 2 Replies View Relatedhow do you install a hauwei E1550 dongle to windows 7 & driver.
View 1 Replies View RelatedI picked a threeHUAWEI E586, but after that i found this on mobile2wifi.co.uk that's fully unlocked, so that i wanna to do unlocked solution for mine, it could be compatible with more network
View 2 Replies View RelatedI have a Pre-existing repeating netgear network of a WNR2200 router set up as a base station with a harddrive plugged into it as a network device (readyshare) and another WNR2200 router set up as a repeater.
I want to supply this network using Huawei B260a modem (on the Three network).
I currently have this setup; The b260a IP is 10.0.0.1 subnet 225.225.225.0 and has DHCP turned on (range 10.0.0.100 - 10.0.0.200). This is plugged into the internet lan port of the base station wnr2200. The base station IP is 192.168.1.1 subnet 225.225.225.0 and has DHCP turned on (range 192.168.1.2 - 192.168.1.254) The repeater Wnr2200 is automatically an access point and has an IP of 192.168.1.254
This setup works but the speeds are around 1-2mb slower when connected to the netgear network than if connected directly to the B260a.
how to add dns server in Huawei echolife bm635 dhcp?
View 1 Replies View RelatedI need to unlock my huawaei u8180 to accept sim card other than the branded one.
View 1 Replies View RelatedJust purchased a WS320 repeater so that my son can use his I-phone and I-pad around the house when he comes home weekends.Sadly, when the repeater is connected to my router the internet drops out on even my wired connections.I recently connected up to fibre and notice that the new router has the same gateway as the repeater.
View 7 Replies View RelatedRegion : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
how to make the Hauwei E3276 LTE dongle work with the TL-MR3420 V2.1?I have tried to create a bin file, but no success - does any bin file I could use?I have not been able to get a positive response from the support team on when this will be supported...
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : India
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Reliance
Configuring my TL_Mr3040 with Huwei EC 150 model USB modem, the modem and ISP name is there in the list , I have configured all (manual/ as well as auto ) methods of authentication as mentioned in user guide.
for more infor , the exported profile from laptop where my modem works fine is
<?xml version="1.0" encoding="utf-8"?>
<utpsdoc type="Profile">
<ProfileGroup type="DialUp">
<Profile name="Reliance" type="" readonly="" device="" user="74831*****" password="74831*****" phonenumber="#777" autoapn="true" apn="" chap="true" pap="false" ip="" dns="" dnsalt="" wins="" winsalt="" imsi="" langid=""/>
</ProfileGroup>
</utpsdoc>
Region : Finland
Model : TL-MR3220
Hardware Version : V1
Firmware Version : TL-MR3220_V1_120523
ISP : DNA
Would it be possible to get huawei e3131 working with other ISP than Poland model? Since it seams to be technically just the same 3g modem, but ISP play locked bin file for it.
I moved into a new apartment in Mexico City a month ago. The internet, already installed when I moved in, comes through a device called a Huawei EchoLife HG8427. For the first month of my residence, the internet worked perfectly. Suddenly, on a recent day, I was no longer able to connect to the internet, though I was still connected to the network. This problem has persisted for some time now.I have tried just about everything that I know how to, including restarting the modem, fiddling with my IPv4/6 settings, disabling/enabling my connection, disabling my firewall, ipconfic/flushdns/registerdns, ipconfig/reset/renew, and probably a few other things that I have now forgotten.
My computer, a Toshiba NB505 running Windows 7 Starter 32-bit, has no problem connecting to the internet via other networks. Ping tests show that I am indeed connected to the network and have no OS problems. I do not have any McAffee software (I read somewhere that this was a problem for some people). I cannot do a hard reset because the modem does not belong to me and serves several other people living here (this is sort of a short-stay guesthouse). This afternoon, the map on my network and sharing center briefly showed a successful internet connection (for about 10 minutes). During that time, however, I was still unable to connect to the internet and when I restarted my computer, it was back to showing a broken connection.Windows IP Configuration
Host Name . . . . . . . . . . . . : jmhc-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No [code].....
I recently got a new laptop, but it won't connect to my network. All my other devices do and all my roommates hadn't experience any problems either. My laptop can also connect to the network of my school. My laptop is a HP Elitebook 8560w with windows 7 Enterprise SP 1(64-bit). I believe my router is a Huawei HG655D.
View 1 Replies View RelatedI have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
View 1 Replies View RelatedI have a router HUAWEI echo lifeH9520b Broadband wireless how do I find WPA security pass phrase?
View 2 Replies View Relatedcan I use a huawei 520b router ro connect wirelessy to xbox
View 1 Replies View RelatedRegion : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
I have a MR3040 and purchased a Huawei E303C data card. After an initial hickup in configuring it the Data card although not on the compatibility list works excellently with the MR3040.
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
Region : Sweden
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Telia
The router finds the 4G modem Huwei E392u-12 but could not connect. Sometimes it also drops the modem and it says "Unplugged"
I tried to update the firmeware but no success.
Region : Malaysia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Celcom
My HUAWEI E367 Can't Detect in TL-MR3420.I don't know what to do and I'm already downgrade the frimware but it still can't detect my broadband. Then, I upgrade the frimware and it still can't detect my broadband.