Port Forwarding On HUAWEI EchoLife HG521?
Dec 24, 2011How can I port forward correctly and make a port checker say it is open? I wan't to open port 82.
View 1 Replies
ADVERTISEMENT
Extending A Wifi Network Using Echolife Hg521 And Hg532 Routers?
May 30, 2012I have an Echolife router, HG532, connected as my main router. It is connected using cable and I use it for wifi too. The signal in other rooms is very weak and I was wondering if it's possible to use a spare router that I have, Echolife HG521, to extend the network coverage?
View 1 Replies View RelatedHuawei HG521 Router - Windows 7 / XP And Vista In Dysfunctional Home Network
Jul 2, 2011My ISP provided me with a new Huawei HG521 router today and I'm trying to get our 4 family PCs to get along nicely through it.So far, one Windows 7 (SysInfo log below) and one XP machine are getting along really sweetly, with the XP printing through the W7's printer.But the 2nd W7 machine sees the 1st W7 machine, but doesn't see its printer.And the sole Vista machine connects to the internet but doesn't see either of the W7 machines, or the XP machine. [code]
View 9 Replies View RelatedHuawei EchoLife HG850a ONT Configuration?
Jul 20, 2011I have BSNL optical fiber broadband connection with Huawei EchoLife HG850a ONT. I want to configure my ONT to control internet access of any individual system which is connected to this ONT by switch.
View 2 Replies View RelatedAdd Dns Server In Huawei Echolife Bm635 Dhcp?
Jan 3, 2012how to add dns server in Huawei echolife bm635 dhcp?
View 1 Replies View RelatedHuawei EchoLife HG8427 - Unable To Connect To Internet?
Oct 3, 2012I moved into a new apartment in Mexico City a month ago. The internet, already installed when I moved in, comes through a device called a Huawei EchoLife HG8427. For the first month of my residence, the internet worked perfectly. Suddenly, on a recent day, I was no longer able to connect to the internet, though I was still connected to the network. This problem has persisted for some time now.I have tried just about everything that I know how to, including restarting the modem, fiddling with my IPv4/6 settings, disabling/enabling my connection, disabling my firewall, ipconfic/flushdns/registerdns, ipconfig/reset/renew, and probably a few other things that I have now forgotten.
My computer, a Toshiba NB505 running Windows 7 Starter 32-bit, has no problem connecting to the internet via other networks. Ping tests show that I am indeed connected to the network and have no OS problems. I do not have any McAffee software (I read somewhere that this was a problem for some people). I cannot do a hard reset because the modem does not belong to me and serves several other people living here (this is sort of a short-stay guesthouse). This afternoon, the map on my network and sharing center briefly showed a successful internet connection (for about 10 minutes). During that time, however, I was still unable to connect to the internet and when I restarted my computer, it was back to showing a broken connection.Windows IP Configuration
Host Name . . . . . . . . . . . . : jmhc-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No [code].....
Huawei EchoLife HG520s Wireless Broadband Router - How To Get Password
Oct 10, 2012How do I get the password for for the Huawei EchoLife HG520s Wireless Broadband Router,there is no indication on back of said Router.
View 1 Replies View RelatedHuawei HG523a - WampServer And Port Forwarding For External Access
Apr 16, 2013I am trying to make my WampServer public but nothing i have tried so far seems to be working. It was all good and well before i got a new router from my new provider.
The router is a Huawei HG523a & my ISP is TALKTALK.
These are the settings i have for the port forwarding. Advanced->Advanced->NAT->Port Mapping
Mapping Name: WebServer(HTTP)
Interface: nas_0_38
Protocol: TCP
Remote Host:
External Start Port: 80
External end Port: 80
Internal Port: 80
Internal Host: 192.168.1.2
Enable: Enable
I have reserved the IP address 192.168.1.2 for my computer under Advanced->Basic->LAN->(Ip address Reserve).
I believe this is all i need to do for the router side of things.
Now for Apache: The .httpd file...
Listen 192.168.1.2:80
And that's everything. The problem is that when i put in my public IP address its not forwarding to my WampServer. its just going to the routers log-in page. If i put in my local ip then i get my servers webpage like i should.
Routers / Switches :: Huawei Echolife 520b Router Wifi Lan Option Is Missing?
Jan 26, 2011I Echolife 520b, can not enable wireless network in the menu Basic Wireless LAN option is missing
View 1 Replies View RelatedRouters / Switches :: Huawei 523a Router Doesn't Allow IP Camera Port Forwarding?
Jan 17, 2013I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera
View 10 Replies View RelatedCisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding
Apr 7, 2013I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies View RelatedHuawei E583C - How To Open Port 2056
Jan 21, 2012I have a Huawei E583C Mobile Modem but cannot forward some ports needed for a game (Civilization 4), specifically port 2056. Im on a windows XP and have disabled that firewall and dont have any other firewall. Ive also logged into the modem with the standard IP but unlike my linkys router in another pc, I can't find the open port section. [code]
View 10 Replies View RelatedHow To Put Security Key In Hg521
Nov 6, 2011regarding of my echolife hg521 i cant put security key on it so that they cant connect in my internet
View 1 Replies View RelatedCisco Routers :: RV042G - Port Forwarding To 2 Different Destinations Based On Incoming Wan Port
Apr 22, 2013how to: port forwarding to 2 different destinations based on incoming WAN port
The default HTTP service works fine: TCP80/80-> 192.168.0.55
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
I was able to do port redirect with the Symantec Firewall I'm replacing.
TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port
Mar 7, 2013Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
Cisco Firewall :: Change Default SSH Port On ASA 5505 (port Forwarding)
Dec 2, 2011So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
Cisco Routers :: RV042G Port Forwarding From Public Port To Internal IP?
Oct 11, 2012Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80
D-Link DIR-655 :: Subsonic Port Forwarding / Get Machine - Port From Outside / Internet
Feb 16, 2011I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
Cisco :: Not Enough Port Fields In Port Forwarding For Linksys E4200
Jul 16, 2011I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
Cisco Routers :: SRP541W Set Up Port Forwarding From External Port
Apr 13, 2013I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.
View 6 Replies View RelatedHome Network :: Port Forwarding Not Access Port
Jul 31, 2011I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies View RelatedPort Forwarding Port 80 Blocks Internet For Everyone Else?
Aug 7, 2011I have a DSL-524B from D-Link. My problem is, whenever I Port Forward port 80 to my comp's IP to host a web server, all the other computers connected to the router are unable to access the Internet. So, I set up no-ip to use port 8080, but, this exposes my ip and even when masking, if you look at the HTML code, you get the ip.I need to know how to open up port 80 without restricting Internet access to only my comp, or any other work around.
View 7 Replies View RelatedEchoLife HG520b Massive Disconnection
Sep 30, 2012i got the echolife HG520b with this weird problem that's bugging me a lot nowadays which is disconnection. The internet light bulb always go off and the internet cuts every 5-10 minutes. I've tried to reboot with factory settings but it didn't work.
View 6 Replies View RelatedEchoLife HG520s - ADSL / Internet Keeps Going Off?
Jul 9, 2012my ADSL/Internet is going off constantly. I have had this problem on and off for years but it has generally went away within time so I guess it's something to do with my provider. Sometimes it will just go off once, but sometimes it will go off 5 times in a row. It also sometimes happens when somebody phones the home phone. I am with talktalk and my router is EchoLife HG520s. I have an extension cable running form the master phone socket, then a microfilter for the phone and the ADSL cable (for my router).
View 5 Replies View RelatedDI-524 / Port Forwarding With ATT DSL?
Nov 10, 2012I was at a friend's office today trying to get the IP cameras working but forwarding the ports seems not to work with his current modem from ATT (a Westwell F90 or something). Would the workaround for this be purchasing a third party modem instead that supports port forwarding and stop leasing the Westwell F90 from ATT?
edit: the modem is hooked up to a DI-524 from D-Link and i already forwarded different ports to see if it was specifically port 80, 1024 etc
Way To Get Port Forwarding In Server
Oct 21, 2011[code]...
How do i setup port forwarding in server 2008?? I have heard numerous ways of doing this through windows firewall, NAT and setting up static routes. Not of which i can get working.
Port Forwarding In A Cisco PIX 501
Apr 1, 2012I finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!I have zero experience with Cisco, so I need step-by-step instructions on what commands to enter to get this thing working!
View 5 Replies View RelatedCisco :: ASA 8.4 And Port Forwarding
Mar 12, 2011I am very confused now. I got my 5505 for home (basic) and loaded up 8.4(1) fresh. From the inside interface I can reach the internet no problem but I am having issues trying to get my port forwarding to work with torrent. inside host is 10.100.130.5 port is 26883, I have been trying to configure this forever.
View 9 Replies View RelatedPort Forwarding Not Working
Jul 7, 2012I am trying to make a server in the game Halo combat evolved for the PC, but i need to forward 3 ports, ports: 80, 2302, and 2303, i did them all, but it still says they are all still closed, when I scan them or they say, its times out.I have a D-Link router.
View 5 Replies View RelatedStatic IP For Port Forwarding?
May 25, 2012I need to set a static IP for port forwarding so my clients can connect directly to my server. I kept losing people because my IP address would change every week. I use version MI424WR router and know my Mac address but do not know which IP address I should set it to.
View 6 Replies View RelatedDLink DIR-601 - ICS And Port Forwarding
Nov 18, 2011I have a computer connected through wifi to the internet.I then turn on the computer into ICS mode and connect that to my PS3/Xbox.I'm trying to get an OPEN NAT type but just can't seem to get it working.I've read a few different pages and have tried some things but it's never worked.I've heard of bridging connections and the sort but I'm not familiar with it. I just want to get an OPEN NAT on my PS3/Xbox.
View 10 Replies View RelatedConfigure Dsl Port Forwarding
Sep 25, 2012To configure DSL port forwarding,I want to configure as remote desktop.
View 3 Replies View RelatedPort Forwarding On A Cisco PIX 501?
Apr 1, 2012I finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!
View 12 Replies View Related