Xp As Wifi Bridge Using Two Wireless Cards On Same Computer?
Jul 3, 2011
I have a laptop connected to an home router through its built in wireless card. It has checked the "share internet conexion" option. I can browse on internet with this laptop.The same laptop have another usb wireless card configured as ad hoc with the other(s) computer. This second computer is communicating with the first one, but the router does not answer the ping call (and I cannot browse on Internet with this computer either).
View 5 Replies
ADVERTISEMENT
Mar 22, 2011
Is it possible to configure 2 wireless cards in one computer in order to connect to 2 wireless networks at the same time? Windows XP Pro SP3
I haven't tried the config yet but I'm curious how WZC will distinct between the two cards.
View 3 Replies
View Related
Dec 10, 2011
Have to re-boot computer for wireless card to be recognized
View 19 Replies
View Related
Jan 24, 2012
I have a piece of hardware (audio device) with Ethernet network access only. I'd like to give it to my users and have them connect via Wifi. But configuring a Wifi bridge for each use is too onerous. I'm looking for a wireless bridge device with a display and keypad that allows the user to scan, select and associate with a wifi router, then bridge the wireless network to ethernet so I can attach my device. Does such an animal exist? Price is not a major factor.
View 5 Replies
View Related
Aug 25, 2012
I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.
View 1 Replies
View Related
Mar 9, 2011
After getting informed that I cannot use the AP I bought yesterday as a bridge, I decided to get another linksys E2000, as the guy in the shop informed me that I can run it in bridge mode for sure.Now, as I am doing this for the first time, and my english is not the best, I was not able to find some instructions, or even better a step-by-step manual that can assist me. I searched the forum, but I did not find anything about the E2000 in bridge mode.
View 7 Replies
View Related
Dec 19, 2011
My e4200 v2 arrived today to replace my v1. I installed it along with a re1000 range expander for our big home. Works pretty well now, but did some google searching and it seems i could make my original e4200 into a bridge, would this be the way to go for max wifi? I could run a cat 6 cable upstairs along the outside of the home fairly easily.
View 9 Replies
View Related
Jan 24, 2012
I might fancy having my desktop stay in a sleep state, waking whenever I need to access it for a file or something, so I tried to use WOL. The nic and bios support it, however when I enable it...
The machine only stays off off for 5-10 seconds at a time. I think this is because instead of waking from only a magic packet, it is waking from ANY packet.
View 1 Replies
View Related
Feb 6, 2012
I've just moved my desktop computer back to my parents house. there is an Internet connection in the house already. if I plug the cable into my laptop it works instantly. when I plug into the desktop there is nothing the green light turns on at the back of the tower but otherwise the computer doesn't register anything at all.
View 7 Replies
View Related
Oct 24, 2008
I am trying to install a wireless bridge on my network. It is a Linksys WET54G v3 wireless bridge. I follow the instructions to configure the bridge: attach the antenna, plug the Ethernet cable into the bridge, plug the other end of the cable into the RJ-45 port of the hub (a Linksys WRT300N router), plug the power supply, insert the setup disk, and run the setup program. After following the steps, it came back and said it could not find a wireless bridge on my network. I tried just plugging the wireless bridge directly into the PC (as it was one of the alternatives in the instruction) Ethernet port. I got the same message. The set up on my wireless router is as follows, DSL modem connects into wireless router, and wireless router connects to PC Ethernet port. I am thinking, connecting the wireless bridge to one of the ports on the wireless router wouldn’t necessary allow the PC to know it is there, would it? Could it be that I don’t have a network? Does a wireless router form a hub?
View 9 Replies
View Related
Jan 5, 2011
I have Dell Vostro 1500, i was reinstalling my latop today, and when I try to install Intel PROSet/Wireless WiFi Connection Utility, there is a error at the end of the installation "Driver is not installed, a problem with this connection has been detected" , the internet is not working.
View 2 Replies
View Related
Jun 24, 2012
I have a 4 computer MS LAN connected to a router that is connected to a ISP disk outside the house and all computers have internet access. I now want a redundant backup on connecting to the Internet. I have a Wild Blue Internet Disk outside the house that we used to use.Can I install another LAN card and just have that connected to Wild Blue?
View 1 Replies
View Related
Aug 3, 2012
Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]
View 18 Replies
View Related
Dec 6, 2011
I purchased a WAG320N and E4200 and have manged to get the modem connected to the internet and it's running fine in that respect, with no adjusting done to the settings.My intentions are to connect the WAG320N to the E4200 wirelessly, as they are in seperate rooms in the house and have done a similar setup in the past with a 7300G Billion Modem and WRT54GL.
With the E4200 I quickly discovered there was no bridge mode out of the box, but checking these forums got the indication that the firmware updates added this capability, so updated it..I entered the IP Address of the Router, the Subnet mask of the network and the Default Gateway / Modem router IP address into the fields, following this guide, but have not been able to get the computers to contact one another, nor ping the other devices.
View 1 Replies
View Related
Jan 29, 2013
Region : Poland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
I have some linksys router that I used as wireless client bridge. I have main router that is connected to Internet and linksys router which is connected to main router's WiFi. Linksys router acts as client bridge connecting LAN devices to main router. Now I own TL-WDR3600 and I would like to replace linksys router. How can I achieve the same on TP-Link router? I don't see any option for setting wireless operation mode.
View 3 Replies
View Related
May 4, 2011
What can I do?
View 6 Replies
View Related
Dec 18, 2012
My computer freezes during torrent downloading , usually within the hour. I have used various torrent clients and problem remains.I have the latest drivers Realtek 8168 v 7065 . Some suggested to turn Checksumms off from the property menu , but that would increase my CPU load. Some other suggested to turn off Task Offload , but I cant find anything similar in Properties.
System Setup
---------------
Summary
Operating System
Microsoft Windows 7 Professional 64-bit SP1
CPU
Intel Core i7 920 @ 2.67GHz55 �C
Bloomfield 45nm Technology
RAM
3,00 GB Triple-Channel DDR3 @ 535MHz (8-8-8-20)
Motherboard
[code]....
View 1 Replies
View Related
Dec 6, 2012
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
View 6 Replies
View Related
Dec 17, 2012
Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.
View 4 Replies
View Related
Mar 29, 2007
I just got a WET54GS5 to use for game systems. i wa able to use the software in order to get the system online and working, but i am not able to access the wireless bridge though the web page. the username is blank and i put in the correct password, but it does not go through.
View 7 Replies
View Related
Dec 22, 2011
i have a question my laptop and my computer does not show the local area connection icon i accidently deleted it and now need to put it back.
View 3 Replies
View Related
Mar 8, 2012
my acer cannot detect any wifi and also dont have network adapter
View 1 Replies
View Related
Sep 30, 2012
My acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies
View Related
Oct 15, 2012
Just had a new wifi usb adapter delivered today and tried to connect my desktop pc from my room to the bt home hub 2.0 in the kitchen. This is only 13meters max to walk and 10m if going through 2 or 3 walls. I installed the ralink drivers and plugged in the adapter which my computer then installed fine. It will pick up some networks including mine which i managed to connect to but only at a very low rate. Not after very long the connection will disappear and so will all the other houses networks. If i then pull it out and plug it in again they appear again for a short while?
I use my parents packard bell netbook in my room and it works fine. It could well be the case that this adapter was pretty cheap from amazon and you get what you pay for..
This and the two attachments contain your required info.
BT Broadband
BT Home Hub 2.0
DSL
[Code]......
View 6 Replies
View Related
Jul 5, 2011
I have one desktop system and one laptop.In desktop i have Internet Broadband. Now i have installed wifi PCi card into Desktop to share internet to my laptop.But there seems some problem i am not able to share internet.
View 9 Replies
View Related
Aug 20, 2012
I have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersWhatAJoy>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : OwlAlwaysLoveU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 13 Replies
View Related
Nov 28, 2012
I recently installed a new SSD and a fresh windows install.After reinstalling everything,I connected my LAN cable and had issues that it would constantly connect and disconnect.Even the lights on the back were flashing on and off.If it stayed on long enough it would establish a connection. I am using my motherboard build in lan adapter.I have a Asus P8P67 Pro, which has the Intel� 82579, 1 x Gigabit LAN Controller. I was able to establish a connection perfectly fine through my wlan stick.I went to the Asus website and downloaded their drivers for the Lan Controller. This did not fix anything.I attempted numerous install and deinstall of the drivers. At that point I went directly to the Intel website and downloaded their most recent drivers. After installing the Intel drivers, I was able to keep a connection, but it was very very slow.Through Lan connection i am barely able to open up Google, but every time I attempt a speed test, the connection is too slow. Though when I connect through Wlan,I get the full connection speeds.The router I am using is a Netgear DG834G v4. Also tested various cable just incase that might be the issue. Also,when i use the same cable and connect it to my Laptop, I get the full connection and no issues.
View 4 Replies
View Related
Jul 19, 2012
1. my laptop is connected to my isp via laptop wireless card
2. I want to share my laptop wifi internet with my Brother laptop wifi using Locco m2 as access-point...
3. Using Locco m2 as access-point my brother and my iphone will be connected to internet via Locco m2
View 3 Replies
View Related
May 4, 2011
I already know how to bridge the lan and wifi connection so I can plug in an ethernet cable from the laptop to my desktop and get internet that way, but is there a way to actually turn the laptop into a router when it's connected to the router, wirelessly? I tried using ad hoc but it looks like that only works if I'm directly connected to the router.
View 5 Replies
View Related
May 16, 2012
I have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies
View Related
Apr 1, 2013
I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.
View 2 Replies
View Related
Sep 30, 2012
My acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter
View 1 Replies
View Related
Jan 7, 2012
I am wondering if I should use my old 100 mbps router as a bridge and use the 300mbps one as the main. Or vice versa. I will mostly be gaming on the bridged router and will have a cat6 going from the router to the computer.
View 5 Replies
View Related
