How To Connect With Bsnl WiFi Connection In Apple Ipad

Dec 1, 2011

How to connect with bsnl wifi connection in apple ipad

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 1142 Apple IPad That Won't Connect To Network

Apr 16, 2013

I have an iPad 4 (6.1.3) that won't connect to our Cisco 1142 APs.  Full Cisco network; 3560 POE switches on edge and Cisco 6509 at the core.At first we looked at it as a wireless issue.  No settings changes on the APs would allow the iPad connect.  About 125 other iPads of various models worked fine.  Took the offending iPad to McDonalds and it connects fine.  Took the offending iPad to another school in our District and it connected and worked fine.  Went back to the home school, still won't connect.  Contacted Apple since iPad was under warranty, sent it to them and they ran diagnostics and it is fine.Is there anyway that the core switch is blocking the iPad client?

View 1 Replies View Related

Windows 7 Laptop - No Connection To Wifi Although Ipad And Phone Connect

Mar 25, 2013

My laptop, windows 7, is telling me there are no connections available. My iPad and phone are connected. I've removed my wifi network and replaced it, I've restarted my laptop, I've deleted other networks.

View 10 Replies View Related

Connect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?

Jan 16, 2013

I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.

View 4 Replies View Related

Cisco :: 1252 And 1242 AP - Apple IPAD In Flex Mode

Apr 24, 2013

One of my customer has an Apple IPAD 2.The IPAD is getting registerd through Cisco WLC 7.2.The APs that are being used is AP 1252 & AP 1242. The AP are configured in flex mode. The issue that we are facing is all the laptops and IPADs other then Apple IPAD are working but the Apple IPAD are not working through AES WPA2.It gives him a dismiss message and at time it gets connected but take a long time to get connected. Incase when the IPAD gets connected the following happens.
 
While connecting to the SSID it will ask for the preshared keyAfetr entering the preshared key it takes time to acquire an IP addressAfter the IP address is assigned it gives a dismiss message. If we do not click on the dismiss message then it will take anothere 30 seconds or so and get connected.

View 1 Replies View Related

Belkin Routers :: F5D8236-4 - Wireless Printing From Apple IPhone Or IPad?

Dec 30, 2012

Does my Belkin F5D8236-4 ver. 1 (firmware 1.00.02) router support Apple's Bonjour print application. I can't get my iPhone or iPad to recognize my new HP Photosmart 7520 wireless printer which is connected to my network through my router.

View 4 Replies View Related

Cisco Wireless :: 1041 / 1042 - Apple Ipad Intermittent Wi-Fi Connectivity?

May 3, 2012

We are experiencing problems with Apple Ipads on a large scale network that we install and maintain, the Ipads seem to join the network with no problems (bit slower than laptops etc) but will then disconnect for no apparent reason at random intervals.  We have ran laptops on the same AP's and in the same area and no similar probems occurred, we are using IOS Cisco 1041's and 1042's, we have seen one of the Ipads's sitting quite happily on a 1042 2,4ghz radio and then it disconnected and went to the 5ghz radio.  We are getting similar disconnects on the single radio 1041.

View 13 Replies View Related

Linksys Cable / DSL :: WAG160N - Apple IPhone And IPad Cannot Find Wi-Fi Signal

Mar 14, 2012

I have a Wag 160n router which works fine with desktop pc connected by ethernet & wirelessly to laptop. My nokia phone finds the wi-fi signal but apple i-phone & ipad dont!

View 1 Replies View Related

Linksys Wireless Router :: E4200 Dropping Apple IPad 2 At Random Times

Feb 8, 2012

Had an E4200 for a couple of months now and have not been able to resolve an issue with the router dropping an Apple iPad 2 at random times.The E4200 is replacing a Cisco Aironet 1200, which never dropped any clients, iPad 2 or others, and never displayed any of the issues below.
 
TECH DETAILS:The E4200 is being used purely as an access point.  All extras are not in use and are disabled.

Firmware 1.0.03
Hardware version 1.
 
BASIC ISSUE:The E4200 drops an Apple iPad 2 off the 2.4 Ghz Mixed (B, G, N) network.  The user must then select the network to rejoin.  Rejoining occurs without incident.  The same issue occurs when the network is restricted to B, G.  The drops occur at what appears to be random intervals - sometimes 10 minutes apart, sometimes hours apart.  We can have as many as 6 drops in an hour.  A ping to the apple ipad shows the device stops responding to pings about 10 seconds before the user is prompted to rejoin a network.  Meanwhile, a ping to the E4200 itself from a laptop connected via the E4200 on the same radio as the ipad continues to work without fail during this incident.

1. The iPad 2's cannot connect to the 5Ghz radio.  I believe iPad 2's are supposed to support 5Ghz.

2. Both our Apple TVs do not connect to the 5Ghz radio: they fail with a "There was an error connecting to the network. Check your settings and try again. (-3914)" error.  Apple TV supports 5Ghz.

3. The admin interface for the E4200 is very slow sometimes.  Probably over 20 seconds to render some pages when it gets really bad.  As a comparison, Internet-based pages on fast sites that delivered via the E4200 itself load in less than 2 seconds.

4. The HTTPS version of the admin interface can only be connected to via Safari browers.  Both Internet Explorer 9 and Chrome 16 fail to connect with a "Connection reset" error.  In Chome, it says "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset."  This is across multiple devices.  There is no issue with straight HTTP.
 
All other devices - including Macs and PCs - connect fine with the E4200 on both 5Ghz and 2.4 Ghz radios, even if they cannot access its admin interface via HTTPS.I've presented quite a few issues above, but the main one is the drop outs for the iPad 2 devices.  I'd present logs on drops, but the thing doesn't record any useful logs.
 
Basic wireless config:

5Ghz:
Network Mode: Wireless-N Only
Channel width: Auto (20 or 40 Mhz)
Channel: Auto (DFS)
SSID Broadcast: Enabled

[URL]

View 9 Replies View Related

Tp-link Adsl2+ Wireless :: Td-w8961nd - Mobile And Ipad Connect To Wifi But No Internet?

Apr 6, 2013

Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel

I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !

The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...

What settings Should I turn on/off or any config I should tweak ?

View 4 Replies View Related

Broadband :: Setup Internet Connection For Every System With BSNL DHCP Modem?

Jul 3, 2011

I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.

View 2 Replies View Related

TP-Link 3G/3.75G Router :: Unable To Connect MR3220 With BSNL EVDO ZTE AC8700 Modem

Feb 13, 2013

Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL

I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.

View 2 Replies View Related

Cisco Wireless :: WLC 5508 To Use Apple Bonjour Service For Apple TV And IPads

Oct 22, 2012

A customer of ours has the following access points and wireless lan controllers on site.  They want to use the Apple Bonjour service with Apple TV's and iPads.  I have enabled multicast feature of the 5508 globally and one the SSID.The Apple TV has an ethernet connection and the iPads connect over the wifi.  The Apple tv is on the same subnet as the iPad's - the Bonjour features do work for approx 5/10 minutes then it stops working for some reason. The Access Points plug into a Cisco 2960 Layer 2 switch, the 5508 controllers plug are in LAG mode and plug into a Nortel Layer 3 stack which I have enabled IGMP snooping.I've read that the Apple Bonjour service isnt designed to work on a multi subnet network - but both the Apple TV and iPad are connected on the same subnet.  Sounds like some kind of timeout but not too sure.

View 5 Replies View Related

Cisco Wireless :: 877w - Apple Devices Not Able To See Wired Apple TV

May 15, 2013

how to setup the wireless interface to forward multicast packets?  Basically I cant get the ipads etc.. to see the AppleTV to control it.  I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface.  I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.

View 1 Replies View Related

Netgear Router - Cannot Set Up Wifi On My Apple Touch Ipod

Aug 6, 2011

I have a netgear router. I just got a iPod from a friend. I am having problems trying to figure out how to get wifi on the iPod.

View 1 Replies View Related

Belkin Routers :: N750db Wifi Keeps Going On And Off In Apple Computer

Jan 25, 2013

We added a Belkin N750DB wireless to our building yesterday. Everyone is working fine except one computer that is an apple. Her wi-fi keeps going on and off. Is there a setting we need to change so this stops happening and she has constant internet?

View 1 Replies View Related

Linksys Wireless Router :: Wrt320n With Apple Time Capsule In Wifi Sharing

Aug 17, 2012

I try to connect my LinkSys wrt320n with Apple Time Capsule with mode "sahring existing wireless network" and so Time capsule doesn't work. It gets IP, but writes "isn't internet connection, WiFi network don't find" and also in the admipage of my wrt320 I can't see Time Capsule as client. 

View 4 Replies View Related

Ipad 2 Doesn't Reconnect To Wifi

Oct 14, 2011

iPad connects fine to WiFi leave it idle for 20mins and then when you wake it up, it doesnt reconnect. It is not just this 1 pad, i have about 20 users in the office with same problems.So far i have tried the following:

1. Update router firmware
2. Network initially had split up so each floor router was a DHCP server now only 1 DHCP server.
3. Test with different security WPA/WPA2 and No security.
4. Connect to different wireless router.
5. Try Apple's Airport but doesnt work in corporate enviornment(couldnt even get it working at home)
6. Try adjusting screen brightness (not in a million years is this a fix!!).
7. Static Addressing not an option as too many devices and it is not a fix.

View 8 Replies View Related

Netgear55 / Get Wifi And The Password For Ipad?

Dec 30, 2012

netgear55 for ipad password.

View 3 Replies View Related

D-Link DIR-655 :: Apple TV Loose Connection

Feb 22, 2011

I've purchased and am trying to use a Dir-655 rev. B, running firmware 2.00NA. I have two hard-drive style Apple Tv's. They can see my wireless network, and after putting in the passcode, can connect. They at this point are visible to iTunes and can play any/all of my content. However after a period of non-use, they go into standby mode, and upon waking, can no longer connect to my network. I have to re-do the wireless each and every time

View 5 Replies View Related

Linksys Wireless Router :: Ea4500 - Device In Smart Wifi Is Listed With Two Multiple Apple

Jan 2, 2013

I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.

View 8 Replies View Related

Windows 7 Dw1501 Wifi Cannot Detect Ipad 2?

Apr 10, 2012

I thought that you just turned on the IPad2 and it would automatically connect to my Dell Studio 5010 DW1501 WiFi Half Card to my new IPad2. No way, I have spent the best of 5 days trying everything including re-installing Windows 7 Pro including the latest DW1501 drivers, but to no avail. I just can not connect. I hear that there is a patch to make Windows 7 compatable with IPad?

View 1 Replies View Related

How To Use Internet On Ipad Through Laptop Wifi And 3g Usb Modem

May 23, 2011

I m using 3G USB modem with my laptop. i also have ipad with wifi. my question is how to use internet on my ipad through laptop wifi & 3G USB modem?

View 1 Replies View Related

Lan Card (rj45) - Ipad Needs Wifi Connectivity?

Sep 11, 2012

i am getting internet from someone by a LAN cable. the lan Cable is connected to my LAN Card (RJ45).i bought a IPAD. and i want to browse using IPAD. IPAD needs Wifi connectivity. can i convert this existing setting to browse internet from my IPAD?

View 1 Replies View Related

D-link Dir-655 :: Slow Transfer Over Wifi To Ipad

Dec 16, 2011

i'm overal content with the router. But i bought myself an ipad and an app to go with it,what it does it, you access your computer from your laptop. You can than transfer files onto the ipad.But the max speed while transfering is 4150kbps, kinda slow imo.

View 2 Replies View Related

Linksys Wireless Router :: How To Set Up E1200 Wifi For Ipad

Dec 26, 2012

I received a Linksys E1200 Wi-Fi Router for Christmas. I inserted the Setup CD into my iMac, running OS X version 10. 8. 2. I clicked on setup and a window opened with the message "Unsupported operating system".At this point I don't plan to use the Wi-Fi for the computer, but I do need to connect the ethernet cable to the router, then to my computer.I will be using Wi-Fi for my iPad. In that case, I have no instructions on how to set up the router for my iPad. Will this Wi-Fi router work or will I need a router compatible with OS X version 10.8.2?

View 1 Replies View Related

WiFi To IPad - Increase The Signal Strength For A Longer Distance?

Jun 12, 2011

I use a Linksys WRT54GR router. I recently bought an iPad, and I generally use it in a room that is on the other side of the house and through many walls. When it works, it works nice. But recently, my signal has been weak, and is often dropped. Pages load slowly, or not at all after getting a could not connect to server or whatever message. However, this isnt a huge problem for my laptops when used in this room. I dont believe it is the iPad that is faulty because my iTouch also experiences difficulty sometimes. I need a way to increase the signal strength for a longer distance. I looked at a repeater, but im not quite sure what it is and how to set one up, or where to buy one.

View 1 Replies View Related

Linksys Wireless Router :: E2500 - Connecting Ipad To Wifi?

Mar 5, 2012

Have set up Router OK. Created Flashdrive EZ
 
How do I connect my IPAD now to WiFi since there is no USB port on my Ipad??

View 1 Replies View Related

Linksys Wireless Router :: WRT120n - Intermittent Connection For Apple Devices

Dec 3, 2011

I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings.  Subsequently, some (but not all) of my apple devices are having intermittent wireless connection problems.  Specifically, my ipad1 & ipad2 never lose their connection but a mac book pro (~ 2 years old), iPhone 3g, iPhone 4, older iPod touch & very old i book g4 all work for a period of time (usually 1/2 day) & then lose their connection.  When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....".  I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem.  Finally, when the devices do lose their network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices).  I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option. 

View 1 Replies View Related

Linksys Cable / DSL :: Cannot Connect Apple Mac To WAG160N Network

Mar 25, 2011

I can find the network OK but whenever I put in the password it just refreshes and tells me I need a password. My son has just got the applemac for his communication studies and neither of us are very bright with computers let alone apple. They are completely different.

View 1 Replies View Related

D-Link DIR-601 :: Apple MacBook Doesn't Auto-connect

Dec 25, 2012

About six months ago I replaced my old router (some generic 802.11b/g router I got for free with a rebate years ago and which lasted a few years) with a Dir-601 after the old router started intermittently cutting out. Setup of the Dir-601 was straightforward enough and I have WEP enabled.  Both my Macbook and my wife's Macbook can connect fine if we choose the router from the drop-down wireless network list, and the router has been consistently reliable in maintaining a connection as long as the OS is running.

HOWEVER, neither computer will remember the wi-fi network and won't auto-connect when waking up from sleep or after a restart.  Our iPhone and Android smartphones remember the network just fine and auto-connect every time, zero issues.  I've gone through all the typical Mac troubleshooting steps, deleting saved network connections and re-establishing new ones.  Never solves the problem.  We always have to go to the wireless network menu and manually select the wifi connection to connect to.

It's not the Macbooks.  Firstly, both macbooks have the same issue, and they're each running different MacOS versions, so there's no version-specific issue that can be at play here.  Secondly, neither macbook had this issue with any previous wifi router.  Thirdly, anywhere else we take our macbooks where we've set up a wifi connection, they remember it and auto-connect without us having to manually select the network.  The only network where we have to manually select the network every time is the one set up with the Dir-601.  In fact, we're at my inlaws for the holidays and our Macbooks have been auto-connecting to their router each and every time.Is there a setting I'm not seeing on the Dir-601 admin page?

View 3 Replies View Related

Dell :: Latitude D610 Will Not Connect To Apple IPhone 4s

Sep 7, 2012

I purchased a new Apple I Phone 4S with hotspot. I have two Dell Computers, a Latitude D830 and an Inspiron 15R, both with Window 7. These computers connect to the I4s hot spot.an older Latitude D610, Windows XP 32 Bit, will not connect. I can connect to the I4S via USB cable but not via wireless.

View 1 Replies View Related

Ipad Is Losing Connection Every 15 Minutes?

Feb 14, 2013

We have a newer linksys router supporting 4 laptops, 2 desktops, 3 iphones, an ipad, an apple tv (also a smart tv, two wifi blu-ray players, but I'm less concerned about those devices). Everything is relatively new (1-2 years old). Most everything is turned on during the day but only a few things may be in use at a time.Many of my devices are loosing connection multiple times per day, my ipad is losing connection every 15 minutes, my apple tv takes a lot of finagling to connect (my level of tech expertise is basically me power cycling everything and prayer). Once my laptops get online, they tend to stick. It seems my apple devices lose signal more frequently.I've updated the firmware on the router and played with wideband settings and channel selection and haven't noticed much difference. I do see a lot of other wifi signals around me. The constant disconnecting has been going on for a couple of months. We have Comcast/Xfinity as our cable provider on 20/MB internet.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved