i am getting internet from someone by a LAN cable. the lan Cable is connected to my LAN Card (RJ45).i bought a IPAD. and i want to browse using IPAD. IPAD needs Wifi connectivity. can i convert this existing setting to browse internet from my IPAD?
View 1 Replieshow much difference does it makes if i install a NIC PCIe card instead of using the MotherBoard LAN RJ45 for DSL PPPOe internet access?how much does a NIC lowers the latency?
View 3 Replies View RelatedWe bought a Cisco line card WS-X4648-RJ45-E for Cisco 4507 R-E. Later on I found that this module is not working with the chassis becuase supervisor engine 4 we are using. Supervisor Engine 6 is required for WS-X4648-RJ45-E. Now I want to go for WS-X4548-RJ45. Is it possible to return the line card? Is there any possible way to exchange?
View 6 Replies View RelatedI have 4506 chassis whose sup engine is WS-X45-SUP6L-E and recently brought line card WS-X4648-RJ45E. When i inserted very same line card on chassis is not support.
View 3 Replies View RelatedWe just moved and had our internet service connected at the new house using the same service provider, wireless router and network we had at the old house. My PC can access the internet fine, but my wife's iPad cannot.
View 5 Replies View RelatedWe are implementing a new corporate wireless network with Cisco 5508 WLC's and C3602I LWAP's. We are not running any RADIUS or EAP at the moment and are starting with WPA2 w/ AES with a pre-shared key to begin piloting. The issue we are having is iOS based devices (iPhone/iPad) do not seem to want to connect. We just get a could not join wireless network messages. We have had success with several Windows based laptops, my MacBook connects, as well as several different Android devices.Looking at the logs on the WLC I see these entries which correspond to the MAC address of my iPhone.
*apfMsConnTask_6: Jul 17 17:25:20.620: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:376 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 24:ab:81:92:4d:97.
My iphone wireless connectivity to my Linksys router that I have put up with for a year, but as I now have the same issue with my ipad I've decided enough is enough.The issue is that they both connect OK to the router and therefore to the internet, but after a short period of time (minutes) whilst it appears that they are still connected to the router the connection seems to completely hang. At that point I have to go into settings on the iphone/ipad and turn off the wireless connection and turn it on again. This then allows connectivity and internet activity for 5-10 (15-20) minutes before it hangs again.I have no problems with connecting to any other router from the iphone and ipad. And I also have no problems with my PC's connecting to the Linksys router.
View 9 Replies View RelatedI configured DHCP pool on Cisco AP 1131, Laptop users are working fine and obtain IP address from AP 1131 DHCP Server, but IPad user is getting IP problem when he try to connect Cisco AP 1131.when i reboot the AP, IPad user getting IP address from 1131 AP dhcp server and access the network resource for the 2-3 hr after that IPad show "obtaining ip address from .....".
AP Detail-
AIR-AP1131AG-N-K9
c1130-k9w7-tar.124-10b.JA2
12.3(8)JEA
We are experiencing problems with Apple Ipads on a large scale network that we install and maintain, the Ipads seem to join the network with no problems (bit slower than laptops etc) but will then disconnect for no apparent reason at random intervals. We have ran laptops on the same AP's and in the same area and no similar probems occurred, we are using IOS Cisco 1041's and 1042's, we have seen one of the Ipads's sitting quite happily on a 1042 2,4ghz radio and then it disconnected and went to the 5ghz radio. We are getting similar disconnects on the single radio 1041.
View 13 Replies View Relatedis there an adapter ( wifi reciver ) that plug into RJ45 port so RJ45 can receive wifi signal ?
View 1 Replies View RelatediPad connects fine to WiFi leave it idle for 20mins and then when you wake it up, it doesnt reconnect. It is not just this 1 pad, i have about 20 users in the office with same problems.So far i have tried the following:
1. Update router firmware
2. Network initially had split up so each floor router was a DHCP server now only 1 DHCP server.
3. Test with different security WPA/WPA2 and No security.
4. Connect to different wireless router.
5. Try Apple's Airport but doesnt work in corporate enviornment(couldnt even get it working at home)
6. Try adjusting screen brightness (not in a million years is this a fix!!).
7. Static Addressing not an option as too many devices and it is not a fix.
netgear55 for ipad password.
View 3 Replies View RelatedI thought that you just turned on the IPad2 and it would automatically connect to my Dell Studio 5010 DW1501 WiFi Half Card to my new IPad2. No way, I have spent the best of 5 days trying everything including re-installing Windows 7 Pro including the latest DW1501 drivers, but to no avail. I just can not connect. I hear that there is a patch to make Windows 7 compatable with IPad?
View 1 Replies View RelatedI m using 3G USB modem with my laptop. i also have ipad with wifi. my question is how to use internet on my ipad through laptop wifi & 3G USB modem?
View 1 Replies View Relatedi'm overal content with the router. But i bought myself an ipad and an app to go with it,what it does it, you access your computer from your laptop. You can than transfer files onto the ipad.But the max speed while transfering is 4150kbps, kinda slow imo.
View 2 Replies View RelatedI have a computer that is running Windows XP and is using a Linksys wireless card and their connection software. (It's not my computer, and I can't recall the name of the software.) The computer can't connect to the internet, but it can connect to the wireless network. When you try to repair the connection you get back that the computer cannot refresh the IP address, and thus repair the connection.A few extra things, the owner seems to be under the impression that another computer has kicked him off and has somehow broken his connection due the fact that it is used for gaming. These problems occurred when said computer had no internet connection at all. (Wired or wireless, everything was unplugged.) I just would like some kind of verification of the fact that another computer, under general circumstances, can't break another's connection out of thin air. I have tried resetting card, routers, and some other things. I am working on trying other wireless receivers on the computer and a different router tomorrow. I will update when that is finished.
View 2 Replies View RelatedI just bought the VOSTRO 260S Slim Tower from dell. I have problem to connect to the wireless in my house. I got other labtops and tabs in my house which connect well to the wireless...Here is my ipconfig:
Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersAnGi3>ipconfig/allWindows IP Configuration Host Name . . . . . . . . . . . . : AnGi3-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected (code )
How to connect with bsnl wifi connection in apple ipad
View 1 Replies View RelatedI received a Linksys E1200 Wi-Fi Router for Christmas. I inserted the Setup CD into my iMac, running OS X version 10. 8. 2. I clicked on setup and a window opened with the message "Unsupported operating system".At this point I don't plan to use the Wi-Fi for the computer, but I do need to connect the ethernet cable to the router, then to my computer.I will be using Wi-Fi for my iPad. In that case, I have no instructions on how to set up the router for my iPad. Will this Wi-Fi router work or will I need a router compatible with OS X version 10.8.2?
View 1 Replies View RelatedI use a Linksys WRT54GR router. I recently bought an iPad, and I generally use it in a room that is on the other side of the house and through many walls. When it works, it works nice. But recently, my signal has been weak, and is often dropped. Pages load slowly, or not at all after getting a could not connect to server or whatever message. However, this isnt a huge problem for my laptops when used in this room. I dont believe it is the iPad that is faulty because my iTouch also experiences difficulty sometimes. I need a way to increase the signal strength for a longer distance. I looked at a repeater, but im not quite sure what it is and how to set one up, or where to buy one.
View 1 Replies View RelatedMy laptop, windows 7, is telling me there are no connections available. My iPad and phone are connected. I've removed my wifi network and replaced it, I've restarted my laptop, I've deleted other networks.
View 10 Replies View RelatedHave set up Router OK. Created Flashdrive EZ
How do I connect my IPAD now to WiFi since there is no USB port on my Ipad??
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
My house is a two story bldg n my room is upstairs. I got my ipod, playstation 3 and laptop all hooked up plus another one downstairs.. The thing is when all of these are working at the same time i cant seem to play call of duty online (example) is there any way i can speed up my connection so all devices work at the same pace? Keep in mind my wireless internet has about 200gb of data.
View 8 Replies View RelatedOnce I had accessed Internet through Wi-Fi from my Laptop by giving the Security password. Disable and Enable wireless network is causing accessing the internet without asking security password every time.I want to access internet it should ask security password every time.
View 1 Replies View RelatedWi-fi working fine prior to updating to itunes 10.6.1 but when I update on my laptop i have no access to internet showing "limited connectivity".Only way i can resolve this currently is to restore to earlier point and have now deleted itunes. However i need access to itunes for ipad and iphones.
View 6 Replies View RelatedI am trying to connect to the internet using both wifi and wired directly to the router and keep getting the same message "limited or no connectivity". It will see all the available wifi networks, and will even connect to the network, but no internet. I have used google and tried several solutions but to no avail. Also, just fyi, i currently have my desktop hardwired to router, and another laptop, ipad, ps3, wii, droid bionic and a couple of netbooks that all can connect to the router using wifi with no problem what so ever. I have also tried to connect to other networks with the same results. There are 2 network adapters, a broadcom netlink (tm) gigabit ethernet and a dell wireless 1397 wlan mini-card. Here is the ipconfig/all.
View 16 Replies View RelatedI'm having a really annoying problem which is making my laptop almost unusable and a hassle to use. My wireless network adapter will suddenly get "limited connectivity", won't connect to the internet but will still get the router.Disabling and then enabling it will cause my computer to freeze, requiring a hard restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it then occurs again within the hour.
Samsung RV511 (i5) notebook from around 2010
4GB RAM, Intel(R)Core(TM) i5 CPU M 480@ 2.67GHz
Came with Windows 7 64bit installed, issue began on this.I installed Windows 8 64bit Pro a month ago, did not reset settings. Problem persists
Broadcom 802.11n wireless network adapter
Device ID 4727
Driver date: 13/03/2012
Driver: 5.100.245.20
It's the latest driver. I keep uninstalling the driver and installing random ones from 2006, 2011 etc however the same problem persists.
This is my IP config when the adapter can't find a connection:
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:UsersStefan>ipconfig/all
[code]....
I have created a virtual WiFi hotspot in win 7 laptop with following commands. netsh wlan set hostednetwork mode=allow ssid=wii key=abcd1234 Now there is a 'Wireless Network Connection 2'(MS virtual WiFi miniport adapter) in my network connections. netsh wlan start hostednetwork WiFi hotspot started and visible in my other wifi device. But the device shows limited connectivity and i can not use internet not even local access to laptop.
My observations - I found that the IP address and DNS of WiFi miniport adapter is 192.168.11.1 But the IP assigned to my other device is 169.XXX.XX.XX which is not in same subnet
So how to set the WiFi miniport adapter of my laptop to assign proper IP address(within subnet) to my other device. So that i can get rid of LIMITED CONNECTIVITY ISSUE .
C:Userssam>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : samlaptop
[Code]......
I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
View 4 Replies View RelatedRegion : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
I'm having a really annoying problem which is making my laptop almost unusable and a hassle to use. After a while of my laptop being on, my wireless network adapter will suddenly get "limited connectivity", and won't connect to the internet.Disabling and enabling the adapter will cause my computer to freeze, requiring a restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it always occurs again within the hour.Sometimes the entire adapter will randomly just disable itself, and the computer will completely freeze, meaning I have to press the power on/off. Sometimes the adapter will just disappear from Device Manager. Searching for "plug and play" devices will cause it to freeze.
Apart from having to reboot, what also seems to work is disabling the wifi from PC Settings, putting the computer to sleep, then awaking it and turning wifi back on. I've had to do that 6 times whilst typing this post.I've tried flushing my dns, registering it, renewing and releasing. Assigning a static DNS address. All those things. Though I may have done them wrong.Operating system: Originally came with Windows 7 64bit installed, issue began on this.I installed Windows 8 64bit Pro a month ago, did not reset settings. Problem persists[CODE]
I'm having a really annoying problem which is making my laptop almost unusable and a hassle to use. After a while of my laptop being on, my wireless network adapter will suddenly get "limited connectivity", and won't connect to the internet.
Disabling and enabling the adapter will cause my computer to freeze, requiring a restart. The same with troubleshooting. The only thing which fixes this is a fresh reboot, however it always occurs again within the hour.
Sometimes the entire adapter will randomly just disable itself, and the computer will completely freeze, meaning I have to press the power on/off. Sometimes the adapter will just disappear from Device Manager. Searching for "plug and play" devices will cause it to freeze.
Apart from having to reboot, what also seems to work is disabling the wifi from PC Settings, putting the computer to sleep, then awaking it and turning wifi back on. I've had to do that 6 times whilst typing this post. I've tried flushing my dns, registering it, renewing and releasing. Assigning a static DNS address. All those things. Though I may have done them wrong.
[B]Specs:[/B]
[B]Laptop model: [/B]Samsung RV511 (i5) notebook from around 2010
4GB RAM, Intel(R)Core(TM) i5 CPU M 480@ 2.67GHz
[Code]....
It's the latest driver according to Windows. I keep uninstalling the driver and installing random ones from 2006, 2011 etc however the same problem persists. I've tried uninstalling the driver and just rebooting, but problem still comes back after a while.