We bought a Cisco line card WS-X4648-RJ45-E for Cisco 4507 R-E. Later on I found that this module is not working with the chassis becuase supervisor engine 4 we are using. Supervisor Engine 6 is required for WS-X4648-RJ45-E. Now I want to go for WS-X4548-RJ45. Is it possible to return the line card? Is there any possible way to exchange?
View 6 RepliesI have 4506 chassis whose sup engine is WS-X45-SUP6L-E and recently brought line card WS-X4648-RJ45E. When i inserted very same line card on chassis is not support.
View 3 Replies View RelatedI urgently want to replace a faulty line card WS-X6748-SFP with a new one. The switch concern is a 5609-V-E operating in Virtual Switching System mode.How long do you suggest the down time will be?
View 1 Replies View RelatedWe currently have a WS-C6506 chassis with a line-card WS-X6408A-GBIC. Currently we need to replace the chassis by a Ws-6504-E and also the line-card. My question is: What must buy line-card and meets the same specifications of WS-X6408A-GBIC?.
View 4 Replies View RelatedI have cat4500 with subject module. There is strange behaviour over module installed in 3rd slot only, some ports are connected, UP & working fine. But If I am connecting new ports over same module, are not coming UP.Duplex/speed settings already checked & are fine. If i connect same machine to any other module, it perfectly comes up & operation is fine.
View 3 Replies View RelatedI want to enable jumbo frame con a Catalyst 4500, specifically in the WS-X4648-RJ45-E card. (running this IOS version Version 12.2(53)SG1).
For what I checked, this are the only needed commands:
vlan xxx
mtu 9000
interface port 4
mtu 9000
exit
I want to be sure that these are the only needed comands and that they won t generate any disruption.
Our one of the Client need to replace CISCO 831 router with high end router , there will be around 60 to 70 users accessing this router for Internet surfing. Right now 831 having 3 Ethernet and 4 Fast Ethernet Ports.
View 4 Replies View RelatedI just got a DSL Modem router (DSL 2750U) which has DSL input for internetconnectivity.My internet service provider provides RJ45 Cable which needs LAN input socket on a router for internet connectivity. How do I connect?
View 4 Replies View RelatedI have internet line came from my neighbor throught his hub directly connected to my laptop.. My problem is, i buy wireless ADSL model router but when i check the DSL line port its rj14 which i can not connect my RJ45 internet line. Addtional information, my wireless router have another 4 port LAN. Can i connect my internet line to LAN port,if it so how will i configure the router..
View 1 Replies View RelatedHow to know about LAN card model and other technical info in Windows XP?
View 3 Replies View Relatedhow much difference does it makes if i install a NIC PCIe card instead of using the MotherBoard LAN RJ45 for DSL PPPOe internet access?how much does a NIC lowers the latency?
View 3 Replies View Relatedi am getting internet from someone by a LAN cable. the lan Cable is connected to my LAN Card (RJ45).i bought a IPAD. and i want to browse using IPAD. IPAD needs Wifi connectivity. can i convert this existing setting to browse internet from my IPAD?
View 1 Replies View RelatedI have a HP DV6000 Laptop. The wireless coverage is not very good and I was thinking of upgrading the Wireless card to something better. The current card is HP Pavilion DV9000 PCI-Express Wireless WIFI Card 802.11a/b/g 441075-001 by HP. Is it even possible to install another card in the laptop or does HP limit what you can put in this laptop
View 3 Replies View RelatedI have just reinstalled windows vista on my dell inspiron 1318 and now my wireless is not working. I think I might need to reinstall the driver for my wireless card but how do I know which driver to install.
View 2 Replies View Relatedwe need to install a line cards (WS-X4548-GB-RJ45, chassis WS-C4510R-E), on a chassis Ws-6504-E.where I can find information about compatibility?
View 2 Replies View RelatedWe are looking for buying a 20GE port 7600 ES+ Card. However, there are a few different models, we are not sure which one is the right one. We will be using this card for Metro Ethernet Termination, MPLS VPN, EoMPLS, QoS (Marking, CBWFQ), PPPoE, possibly VPLS.
View 5 Replies View RelatedThe ethernet card integrated into the mother board quit working, it doesn't even show that one exist. What ethernet card can I replace it with, or can I.
View 1 Replies View RelatedI own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:
1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then
2) what is the best notebook card to replace the Broadcom with to assure these issues go away.
Im looking for MIB for monitoring 6500 line card from availability prespective;
View 1 Replies View RelatedI see differrent voltage in line card ws-6704. Iam afraid of something went wrong with my 6500 switch. two 6500 switch is redundant.
View 3 Replies View Related[code]...
Primary clock is CSC 1 Board State is Waiting to retry download after persistent failures (RTRY WAIT) Insertion time: 00:00:16 (13:54:07 ago)
Im wondering if the Adaptive Security Services Module has some of the same function as a ASA 5500.Can we configure a IPSec VPN tunnel, SSL VPN tunnel or IPS on a C6500 with ASA-SM or do we need a specific line card for those tasks?
View 1 Replies View RelatedCisco Catalyst 6509 Chassis.We have moved a line card from slot 8 to slot 6, but config remains for the line card in slot 8 and nothing is seen in slot 6.
We are running on IOS Verison 12.2 (33SXH2A) i.e. VSS.Blade model number is WS-X6748.
when replacing a line card on a 6500, i gather there is no config stored on the card, its all held on the sup, so when i put in another card the config will be the same?
View 2 Replies View RelatedI am trying to configure traffic policing on a 7609 with ES20 line card - however it doesn't appear to be working. The customer is randomly getting DoS attacked, and the policy doesn't appear to be dropping any exceed/violate traffic.This is an egress policy on a sub-interface.
View 5 Replies View Relateddirect me to a document detailing the order that line cards are supposed to boot in a 6500? I'm noticing random boot sequences in some of my chassis,?Note: We currently run Sup720 3CXL for the most part.
View 6 Replies View RelatedThe WS-X68xx series line card has a fabric of 40Gbps and a 16 Port 10GE has a 4:1 oversubscription rate. The WS-X6908-10G has a fabric speed of 80Gbps and has a 1:1 oversubscription rate.
If I mixed the 68xx and 69xx series line card, do I get 80Gbps for the 6900x and 40gbps for the 68xx line card? Or would the 69xx series line card be downgraded to 40Gbps?
From my understanding, the 68xx series has a DFC card and thus the fabric speed operates independently.
We are planning to replace a few line cards in the existing 6509-E chassis. The sup installed is a VS-S720-10G-3C but the line cards are legacy. As a result we are not able to enable the VSS functionality. We are looking to replace the existing line cards with the following:
1. 1 x WS-X6716-10G-3C
2. 1 x WS-X6724-SFP
3. 4 x WS-X6724-GE-TX
What are the requirements in terms of IOS and Roman.
The current IOS is: Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
And the ROM Version is: ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
Do I need an upgrade?
Is it possible to use a 10GE interface on a sup720 and an interface from a 671610GE line card and create a port channel. I haven't found specific documentation on CCO stating you can. I have found the QOS queuing is differnet between the sup and line card.
View 1 Replies View RelatedCisco announced EOL for ws-x6148A-GE-45AF line card and proposed WS-X6148E-GE-45AT. However this card seems not to be supported by the SUP2T-10G supervisor. Which alternative card should I take for this EOL line card, or can I use the proposed line card (use extra daughter card DFC4)?
I'm looking for an alternative line card for the 650x-E chassis with Supervisor 2T iso 6148-GE-45AF
On a number of 6500 chassis it appears that linecard 3 did exist at somepoint, but was removed.Problem is that when issuing the 'show int desc' or 'show ip int brie' the ports for the still appear, and indeed same with 'show run' and 'show conf'.
View 1 Replies View RelatedI need to pull a WS-X4712-SFP+E line card from an online 4507 chassis, can this be done, or does it need to be offline?
View 2 Replies View RelatedI've 4500 Core Switch with 4507R chassis, Sup V-10GE(WS-X4516-10GE) along with 2 WS-X4306-GB line Cards, but now I require a line card for 14 more fiber up links and I cannot go with 3 of 4306 as there are only 2 slots left. I've checked and found that E series line cards does not work with Sup V Engine.
As per the link below, I found that "WS-X4448-GB-SFP" is compatible..
[ URL]