Cisco Switching/Routing :: Line Card Speed With 6800 And 6900?

Jan 26, 2013

The WS-X68xx series line card has a fabric of 40Gbps and a 16 Port 10GE has a 4:1 oversubscription rate. The WS-X6908-10G has a fabric speed of 80Gbps and has a 1:1 oversubscription rate.
 
If I mixed the 68xx and 69xx series line card, do I get 80Gbps for the 6900x and 40gbps for the 68xx line card? Or would the 69xx series line card be downgraded to 40Gbps?
 
From my understanding, the 68xx series has a DFC card and thus the fabric speed operates independently.

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: To Replace A Line Card WS-X6748-SFP

Oct 18, 2012

I urgently want to replace a faulty line card WS-X6748-SFP with a new one. The switch concern is a 5609-V-E operating in Virtual Switching System mode.How long do you suggest the down time will be?

View 1 Replies View Related

Cisco Switching/Routing :: 6509 Line Card Not Showing

Jun 30, 2008

Cisco Catalyst 6509 Chassis.We have moved a line card from slot 8 to slot 6, but config remains for the line card in slot 8 and nothing is seen in slot 6.
 
We are running on IOS Verison 12.2 (33SXH2A) i.e. VSS.Blade model number is WS-X6748.

View 2 Replies View Related

Cisco Switching/Routing :: Replacing A Line Card On 6500?

Mar 20, 2012

when replacing a line card on a 6500, i gather there is no config stored on the card, its all held on the sup, so when i put in another card the config will be the same?

View 2 Replies View Related

Cisco Switching/Routing :: 6500 Line Card Boot Order?

Nov 28, 2011

direct me to a document detailing the order that line cards are supposed to boot in a 6500? I'm noticing random boot sequences in some of my chassis,?Note: We currently run Sup720 3CXL for the most part.

View 6 Replies View Related

Cisco Switching/Routing :: Replace Chassis By Ws-6504-E And Also Line-card

May 27, 2012

We currently have a WS-C6506 chassis with a line-card WS-X6408A-GBIC. Currently we need to replace the chassis by a Ws-6504-E and also the line-card. My question is: What must buy line-card and meets the same specifications of WS-X6408A-GBIC?.

View 4 Replies View Related

Cisco Switching/Routing :: Requirements For Line Card Upgrade On WS-C6509-E

Jan 14, 2013

We are planning to replace a few line cards in the existing 6509-E chassis. The sup installed is a VS-S720-10G-3C but the line cards are legacy. As a result we are not able to enable the VSS functionality. We are looking to replace the existing line cards with the following:

1. 1 x WS-X6716-10G-3C
2. 1 x WS-X6724-SFP
3. 4 x WS-X6724-GE-TX
 
What are the requirements in terms of IOS and Roman.
 
The current IOS is: Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2) 
And the ROM Version is: ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
 
Do I need an upgrade?

View 3 Replies View Related

Cisco Switching/Routing :: 671610GE / 10GE Port Channel Using Sup And Line Card?

Jan 17, 2012

Is it possible to use a 10GE interface on a sup720 and an interface from a 671610GE line card and create a port channel. I haven't found specific documentation on CCO stating you can. I have found the QOS queuing is differnet between the sup and line card.

View 1 Replies View Related

Cisco Switching/Routing :: WS-X6148E-GE-45AT - Alternative Line Card For 650x-E?

Mar 26, 2012

Cisco announced EOL for ws-x6148A-GE-45AF line card and proposed WS-X6148E-GE-45AT. However this card seems not to be supported by the SUP2T-10G supervisor.  Which alternative card should I take for this EOL line card, or can I use the proposed line card (use extra daughter card DFC4)?
 
I'm looking for an alternative line card for the 650x-E chassis with Supervisor 2T iso 6148-GE-45AF

View 7 Replies View Related

Cisco Switching/Routing :: 6500 How To Remove Ports From Config For Non-existent Line Card

Aug 6, 2012

On a number of 6500 chassis it appears that linecard 3 did exist at somepoint, but was removed.Problem is that when issuing the 'show int desc'  or  'show ip int brie'  the ports for the still appear, and indeed same with 'show run'  and  'show conf'.

View 1 Replies View Related

Cisco Switching/Routing :: Pull A WS-X4712-SFP+E Line Card From Online 4507 Chassis

Jun 24, 2012

I need to pull a WS-X4712-SFP+E line card from an online 4507 chassis, can this be done, or does it need to be offline?

View 2 Replies View Related

Cisco Switching/Routing :: Compatibility Of 4548 SFP Line Card With WS-X4516-10GE Sup Engine

Oct 12, 2012

I've 4500 Core Switch with 4507R chassis, Sup V-10GE(WS-X4516-10GE) along with 2 WS-X4306-GB line Cards, but now I require a line card for 14 more fiber up links and I cannot go with 3 of 4306 as there are only 2 slots left. I've checked and found that E series line cards does not work with Sup V Engine.
 
As per the link below, I found that "WS-X4448-GB-SFP" is compatible..
 
[ URL]

View 1 Replies View Related

Cisco Switching/Routing :: High Memory Utilization On Line Card 6748 And 6724?

Apr 15, 2012

I am writing with regard to a high memory utilization that we have on a pair of line card WS-X6748-GE-TX and WS-X6724-SFP for a VSS 6500. I am enclosing a little part of the "show tech"of this VSS 6500 where is possible to see the high memory utilization of the line cards 1/1, 1/2, 2/1, and 2/2, in despite of having some ports in state connected.  In addition of this, the IOS installed on VSS 6500 is s72033-ipservicesk9_wan-vz.122-33.SXI6.bin for checking if there are some bugs affecting the behaviour of the Switch for this case.
 
 System Resources
  PFC operating mode: PFC3C
  Supervisor redundancy mode: administratively sso, operationally sso
  Switching resources: Sw/Mod    Part number               Series      CEF mode
1/1      WS-X6748-GE-TX            CEF720           CEF
1/2      WS-X6724-SFP              CEF720           CEF

[code]....

View 1 Replies View Related

Cisco Switching/Routing :: Does Nexus 7K Support Multiple VDCs Sharing Ports On Single Line Card

Mar 19, 2013

Does Nexus 7K support Multiple VDCs sharing ports on a single line card. One of our cisco parnter engineers stated that cisco doenst recommend using same line card for multiple VDCs.The second VDC (Non-Default VDC) will be used four our Outside, and DMZ Segment, and to phyiscally segregate our Firewall from our Internal/Inside Core Switch without using a physical DMZ Switch.I know Cisco used the Nexus in this way in their PCI DSS 2.0 Compliance Document. Module is N7K-M148GT-11L
 
Mod  Ports  Module-Type                      Model              Status
---  -----  -------------------------------- ------------------ ------------
1    48     10/100/1000 Mbps Ethernet XL Mod N7K-M148GT-11L
Mod  Ports  Module-Type                      Model              Status
---  -----  -------------------------------- ------------------ ------------
1    48     10/100/1000 Mbps Ethernet XL Mod N7K-M148GT-11L

View 7 Replies View Related

Cisco Switching/Routing :: What S The Fabric Speed (backplane Speed) Of A Nexus 2232 10G EX

Jan 12, 2013

What s the fabric speed (backplane speed) of a Nexus 2232 10G EX?What is the forwarding rate (Mpps) of the same 2232 FEX? 

View 6 Replies View Related

Cisco WAN :: MIB For Monitoring 6500 Line Card?

Dec 6, 2010

Im looking for MIB for monitoring 6500 line card from availability prespective;

View 1 Replies View Related

Cisco WAN :: Different Voltage In Line Card Ws-6704?

Apr 24, 2011

I see differrent voltage in line card ws-6704. Iam afraid of something went wrong with my 6500 switch. two 6500 switch is redundant.

View 3 Replies View Related

Cisco WAN :: 12406 Line Card Can't Be Online

Jan 3, 2012

[code]...

Primary clock is CSC 1  Board State is Waiting to retry download after persistent failures (RTRY WAIT)  Insertion time: 00:00:16 (13:54:07 ago)

View 1 Replies View Related

Cisco VPN :: C6500 Need A Specific Line Card For Tasks

Feb 20, 2012

Im wondering if the Adaptive Security Services Module has some of the same function as a ASA 5500.Can we configure a IPSec VPN tunnel, SSL VPN tunnel or IPS on a C6500 with ASA-SM or do we need a specific line card for those tasks?

View 1 Replies View Related

Cisco :: WS-X4648-RJ45 Way To Replace A Line Card With Another Model?

Jul 14, 2012

We bought a Cisco line card WS-X4648-RJ45-E for Cisco 4507 R-E. Later on I found that this module is not working with the chassis becuase supervisor engine 4 we are using. Supervisor Engine 6 is required for WS-X4648-RJ45-E. Now I want to go for WS-X4548-RJ45. Is it possible to return the line card? Is there any possible way to exchange?

View 6 Replies View Related

Cisco WAN :: Traffic Policing On 7609 With ES20 Line Card

May 5, 2013

I am trying to configure traffic policing on a 7609 with ES20 line card - however it doesn't appear to be working.  The customer is randomly getting DoS attacked, and the policy doesn't appear to be dropping any exceed/violate traffic.This is an egress policy on a sub-interface. 

View 5 Replies View Related

Cisco Switching/Routing :: How To Clear Vty Line On Cat6500

Jun 19, 2012

how to clear vty line?  Please see below. A sh tcp <line number> shows that the TCB is waiting for TCP Process.  The TCP processs TCB is waiting for is SSH.  I believe because of this ssh process still running, the vty line cannot be cleared. 
 
sh users
   Line       User       Host(s)             Idle       Location
   1 vty 0     pf         10.10.20.8                                   9w1d 10.10.1.54
   2 vty 1     pf         10.10.1.16                                35w0d 10.10.1.54
   3 vty 2     pf         10.10.1.16                                 1y14w 10.10.1.54

[code].....

View 7 Replies View Related

Cisco Switching/Routing :: 2960 Saving Changes To Line Con 0

Nov 21, 2011

I was configuring a new Catalyst 2960 switch and had forgotten to set the speed back to 9600 after downloading the new IOS software image.  I finished doing all of my configurations and went in to line con 0 to change the speed back to 9600.  The change was accepted and I did a 'wr' to save the change, but when I reload the switch it is back to 115200.

View 3 Replies View Related

Cisco Switching/Routing :: C2900 Can't Delete Line 2

Mar 20, 2013

I'm configuring a new 2911 running c2900-universalk9-mz.SPA.151-4.M4.  In the config by default is "line 2"  its not a vty, aux or console line and I can't remove it.

View 1 Replies View Related

Cisco Switching/Routing :: 4500 Sup 6 / Not Seeing Line Cards

Feb 14, 2012

I have a Cisco 4500 Sup 6 engine and I have two 48 port fiber line cards installed. When I do a show interfaces I do not see any of the Fiber cards. This is a new out of the box 4500 and I installed the Sup 6 Line card in Slot #1, And the two 48 port Fiber cards in Slots 2 and 3. Am I missing something, is there a command or set up procidure for the line cards. I just assumed they were plug and play

View 2 Replies View Related

Linksys Wireless Router :: Connecting EA4500 To Samsung 6900 Smart LED

Jan 29, 2013

I have been trying to connect my smart tv to my wireless network for the last 3 weeks.  It connects intermittently but the connection is always lost within a few minutes to a couple hours.  I have turned off all of the firewalls, and all other devices connect fine.  It is an ea4500 running on updated firmware and a Samsung 6900 smart tv.  The connection works if I run an ehternet cable to it oith from the modem as well as from the router, but it does not work over the wireless connection.

View 7 Replies View Related

Cisco WAN :: Line Card WS-x4648-RJ45-E Not Supported On 4506 Chassis

Jan 4, 2013

I have 4506 chassis whose sup engine is WS-X45-SUP6L-E and recently brought line card WS-X4648-RJ45E. When i inserted very same line card on chassis is not support.

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 7000 OTV With F1 Line Cards?

Jul 17, 2012

I have two data centres connected via a L2 DWDM, my manager wants to look into using OTV to get rid of the layer 2 broadcasting issues.
 
Problem is the DWDM is 1000BaseSX, which is only supported on the N7K-F132XP-15.   (and the N7K-M148GS-11 but that doesn't support FCOE, so many bloody caveats). From what I can gather OTV is not supported on the N7K-F132XP-15.
  
Is it possible to terminate the DWDM on the F1 card & loop another port from the F1 to a port on the N7K-M148GT-11 & run OTV on the M1????
  
Either using VDCs or just an isolated VLAN on the F1. Is there any better way to do this? Hardware has not yet been purchased.

View 0 Replies View Related

Cisco Switching/Routing :: Moving Line Cards On 4510R-E?

Apr 2, 2013

We need to move some line cards around on our 4510.  The top slots have a 24Gbps backplane while the lower slots are limited to 6Gbps.  Poor planning on our part has left us with installing a 10Gb line card in one of the bottom slots.  I'd like to move a couple of the cards up top, to the bottom.
 
My question is simply will the switch magically preserve the configuration for those cards and change the slot number for me or will I need to reconfigure the interfaces for those cards I move?

View 2 Replies View Related

Cisco Switching/Routing :: 877W - Removing NTP Line From Configuration

Jan 13, 2012

NTP server When I setup NTP server to take time from [URL] everything is working fine but as soon as I reset my router during boot I can see that router is first trying to get time before it's even connected to ATM and when it can't get time from NTP server it's removing NTP line from configuration (ntp server uk.pool.ntp.org source Dialer0 ). How I setup to wait with sync and do it once ATM connection is up and established? Or How to get IOS to leave this line and sync with NTP every 10 min)?

View 9 Replies View Related

Cisco Switching/Routing :: Upgrading Line Cards - 4510R-E

Feb 4, 2013

I have a requirement to upgrade some line cards in our 4510R-E chassis to ease some oversubscription due to the 6Gbps limit.
 
At the moment my plan is to upgrade three cards from WS-X4548-GB-RJ45 to X4648 to get the 24Gbps per card.
 
Supervisors are 6-E
 
1. Is this a viable plan?

2. If so can the cards be hot-swapped?

3. Would the new cards retain the existing interface settings of the previous cards?

4. Any gotchas to look out for?

View 4 Replies View Related

Cisco Switching / Routing :: 3550 - Line Protocol Flapping

Aug 27, 2012

I work for a Wireless ISP and the device impacted is the back haul radio into the site. I have swapped from a 2950T to a 3550. Replaced the radio, PoE, patch lead. We have re ran the cable up the tower using shielded outdoor cable with a drain wire which has been earthed to an earthing block in the cabinet. We have other devices on the tower not experiencing the issue. We suspect cable interference however am now at a loss to diagnose further.

[Code]....

View 3 Replies View Related

Cisco Switching/Routing :: 10GBSR - How To Measure Delay Of Line

Dec 27, 2011

We have two devices connected through a several miles DWDM connection (two switchports 10GBSR).We would like to measure the delay for that connection.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved