My NetGear router stopped connecting to the internet. The internet light, which is usually orange, is now yellow and flashing. I tried rebooting everything and now, when it connects it says "local access" so I can't get on the net
View 3 Replies[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
View 2 Replies View RelatedWell, I have a WRT120N Router for 11 months to now. I never had a problem with the Router, but since 2 days ago, It didnt connect to the internet.
My network is: Internet > Cable Modem > WRT120N > Computers
As I said, the problem is that the Router doesnt has Internet Connection.
Things to take in consideration: The Cable MODEM ISN'T the problem Because if i connect the modem directly to a computer, I have Internet connection without problems.I Diconnected and Connected both Modem and Router in several ways and several times, and it doesnt work.I also tryed clonning my PCs MAC address to the Router and it was the same.The Router Indeed receives the External IP Address from the Modem, and also, it changes if i restart the modem (as my ISP IP is DHCP). But there is NO internet conection.The Router had the 1.0.05 Firmware, and i upgraded to 1.0.06, and the problem persists. Another thing to take in account is that if I turn off my modem and the I turn it On, sometimes, the router receives Internet connection, but in matter of Seconds (minutes as much), the internet connection falls.
This is NOT an ISP problem, because as I said, if I connect the Modem Directly to any PC, i have a perfectly normal Internet Connection, And also, I called my ISP and they Said me that there werent any problem on their network.
I have also tryed with the "Router Dianostics" (the Ping and Traceroute options that are in the Router's Webend and also, no conection. So its NOT a Cables problem.
I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.I also had a word with my internet provider...he's kept the MAC open (or something like that) so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..
View 2 Replies View RelatedMy linksys router stopped connecting. Laptop says its available but won't connect. Have reset, reloaded w/CD, unplugged.
View 3 Replies View RelatedRecently, after a few hours my laptop suddently loses connection to the router and from then it keeps connecting and loosing the connection for a few hours. Sometimes it connects successfuly .This happens while my other pc, connected by cable to the router, works perfectly.The next day i open the laptop the internet works fine.I noticed ,when i had another router, that the laptop often had problems connecting to it while my pc was working. It would connect a lot slower after i would reset the router.I have Windows 7 Ultimate installed on both.
View 3 Replies View RelatedToday i just brought Diablo 3, played it but i started to get disconnected from the server.(i know this sounds like a game issue but it is not) So i got bored from it and shut it down. No sooner did i do that my internet started to disconnect on me. i mean that one min it is working the next it is not. then i worked fine for a bit. But about 30 after it stopped my wifi router stopped connecting to the web, I tried to reset it multiple times but to no avail. I though it was my modem but i plugged in an old router i have and it connects with no problems. so those facts leave me to think there is something wrong with my wifi router. i had a spare brand new one sitting around and it did the same thing as the old one.
View 3 Replies View RelatedMy daughter has a Tobisha laptop with Windows 7 working off a cable modem wireless thru a Linksys Cisco router. It all has been working fine for months until yesterday she cannot connect to router. I unplugged router and modem for a minute, replugged modem then router back in and laptop still will not connect to router. I can connect to internet if don't use router and connect from modem to laptop. I do not think anything is wrong with her router or any plug-in connections because I have no problem connecting to her router with my own laptop or my wifes laptop! I have a Dell ( VISTA ) and a Dell ( XP ). I'm thinking maybe wirless card in my daughter's Tobisha could be the problem?
View 5 Replies View RelatedMy internet went down temporarily last week and ever since my computer has not been able to maintain a connection. It will pick up the signal intermittently but produce painfully slow internet and then promptly lose the signal all together. The wireless connection is working perfectly on laptops and smart phones, even when in the same position from the router as my PC.
Router: Netgear Dg834Gv3
Wireless Adapter: Netgear WG111v3 USB
Computer: Dell Vostro 200
ISP: AOL
i have an old Netgear MR 314 router that works like a charm for my wired connections, but whenever i try to connect wirelessly from my phone or laptop, it connects but doesn't access the internet.
View 5 Replies View Relatedafter recently moving out of my parents house to go to university, my laptop has stopped connecting properly to my wireless network at my parents house. It connects, but says that I either have no internet access or limited access. This does not happen to any other device connecting to the network, and my laptop doesnt have trouble connecting to any other wireless network.
View 1 Replies View Relatedmy hp laptop suddenly will not connect to our wireless router. It was fine but now it just stopped connecting. It says wireless connections are available but will not connect to ours. My husbands laptop has not been affected. We have tried everything...resetting the router (multiple times), reinstalling the router. I have not tried to connect anywhere else yet but that is something I am going to try today. What could have happened to the laptop for it to suddenly stop connecting?
View 1 Replies View RelatedMy laptop all of a sudden stopped connecting to my wireless network. It was fine before. now it doesn't even find my network or any other networks in the area (it used to before). When i click on the search for available networks it shows "HP Computer Sharing Network".
View 2 Replies View RelatedI've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.
I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)
I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).
We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
View 2 Replies View RelatedI am having trouble getting the wrt610n to connect to the wnr2000v2 that can be set a wireless repeater. I had a 160n hooked up and it was working fine, but am unable to get the 610n going on it. setting this type of networking up , but have a general idea of how it works. I have the 610n running and is broadcasting a signal, but the wnr 2000 will not connect to it wirelssly and repeat it. The setup in the netgear is pretty basic , but I am new to the linksys 610n and the interface that's why I believe it has to do with the 610n.
View 3 Replies View RelatedMy Linksys WRT120N router was working fine for all of 1 and 1/2 months and suddenly it stopped making the internet connection. At first nothing could access the internet but now that I've reset the router (via the little reset button in the back) my Kindle can access the wireless, but of course no password etc. I actually don't know how to put back the username and password for it. When router is connected: When I troubleshoot the connection by clicking on "Repair Connection" it takes about 2-5 mins "obtaining a new network address" then I get an error saying "The wired connection to your router was not automatically repaired. X Local network: Not connected.
View 14 Replies View RelatedMy laptop running windows XP all of a sudden wont hook up to IE just churns for a few seconds & stops . I did run spybot S&D on a recomendation & still wont hook up. It is on a wifi but I tried it at a local wifi spot & wont hook up there either , it shows a good wifi connection at both places . I am a novice so should I just take it to a repair shop or is there some tricks I can try ?
View 2 Replies View RelatedIve been having problems with the Wireless connection on my laptop for a while now. Basically even though the signal strength is shown as excellent and hovering over the little monitor in notification area shows "Internet access" i cannot connect to the Internet via WiFi. The strange thing is when i connect an Ethernet cable the signal strength on the bottom goes up and i get Internet access but the computer seems to think its got a wireless connection, even though its actually a wired connection. Ive already tried the following
Driver Update
Windows Update
AntiVirus/Malware Scan
Firewall/Anti Virus Off
Ethernet Connection Disabled and Enabled
Changed router channel
reset wep key numerous times
Network Scan (no problems found)
System Information
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408-1631)
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz (2 CPUs), ~2.1GHz
Memory: 4096MB RAM
Available OS Memory: 3892MB RAM
[code]....
My computer is almost always on. My modem and router are always on.Last night I was using the internet, no problems.This morning I woke up to find "No Internet Access".My computer was connecting to the router just fine, but the router was showing a orange Earth symbol on the front (not green).I connected the computer directly to the modem and internet works just fine. After powering off both the modem and router and checking all the connections ... still the router is not "reading" the internet from the modem. And still the internet is there if I connect the modem directly to the computer (that's how I am online and posting this right now).
View 1 Replies View RelatedI am running an i7 MSI gt683 with windows 7 with an Intel Centrino Wirelss-N 130. My home wifi connection runs off of comcast on a netgear router, and the wireless connection works on every single device in the house except for my laptop. I can run my ps3, my wii, we have an ipad, all our phones can connect and we have another laptop that connects with no issue. I have updated my drivers for my wireless card to the latest, flushed the ip on my desktop that the modem is connect to a dozen times. The only way to sometimes fix it is to manually log in to my router and release/renew the ip address from there. Sometimes it will work, sometimes it won't. When it does work, it will work for about a week and then stop working for no reason at random times.The errors I keep getting are:Identifying network (which runs infinitely before cycling back to no internet connection)Connected with no internet access.
View 5 Replies View RelatedHow do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies View Relatedhow can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies View RelatedI have a netgear CVG834G main router, were my desktop is plugged on to.I pulled a new cable trough the house and garage to have internet access on the other side (cable length is about 80 meters).After the 80meters of cable I placed a Linksys WRT54GS v5.1 router. The problem is that I can connect to the Linksys, but the Linksys can�t connect to the netgear. On the Linksys the internet LED is blinking very slowly (what does this mean?). So first I thought that the cable was broken or too long. I tested the cable => not broken. I connected the Linksys with the netgear trough a shorter cable and then connected my laptop via the long cable (80meter) and this works perfectly.Is the maximum distends a netgear can take less than 80 meters? (thought is was 100meter ).
View 3 Replies View RelatedI have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?
View 7 Replies View RelatedIm having problems staying connected to my internet. I have Verizon Fios router that is wired into this desktop i also have 2 laptops and now im trying to connect a second desktop wirelessly to the router. My Netgear Rangemax PCI picks up the signal at 68% and connects to the router. But periodically it disconnects from the router and i click connect to a network icon and it shows that i have no wireless internet as if no PCI card is installed so i wait a min then it shows up again and windows network diagnostic kicks in and "resets the network adapter" and all is well for about 15min till it disconnects again.
View 1 Replies View RelatedI cannot get my USB N adapter to connect with a u-verse G router
View 4 Replies View RelatedMy laptop has recently stopped connecting to my wireless network. There is nothing wrong with the router as all my other wifi devices still work on the network (xbox 360, flatmates laptop etc.) so I assume its something to do with my laptop.I have tried restarting the router and it hasnt worked, neither have any of the windows tools. I have run ipconfig/all while the the connection was down and will post the report at the end of this post (I am currently connected to the internet with an ethernet cable).I have checked that all my drivers are up to date and they are so I dont think that is the problem either. [code]
View 8 Replies View RelatedOne month out of the box, my Dell Inspiron M5030 suddenly refuses to connect to my Netgear router. It can see the router as an available connection, but I still get an "unable to connect" error. A wired connection to the router works just fine, but I'm still unable to get the internal WiFi adapter to connect
View 2 Replies View RelatedI am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
I have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies View RelatedMy new dell Inspiron 3520 stopped connecting to the Internet it won't connect to wifi at all and is limited when plugged into a Ethernet cable . I don't know what to to I've tried everything the wifi led isn't working either
View 10 Replies View RelatedI just got new roommates and the internet on his computer would only load facebook and google. NOTHING else. It said he has internet connection but it still wouldn't work. I even called my internet provider and they couldn't figure it out. His internet worked perfectly fine when it was on safe mode with networking. I even disabled his firewalls and I ran malewarebytes but found nothing. I thought this was just his computer but then a day later my computer is doing the same thing! my computer has worked perfectly fine for over a year on the same router and everything but now it has the same exact symptoms as his. I don't know if this is a router issue or not. .
It is a wireless connection, internet provider is cable one, and my router/modem is a Zoom DOCSIS 3.0 cable modem/Router with wireless -N