Cisco WAN :: 881W Doesn't Allow Logon To AP Module Even After Adding Correct Credential
Mar 18, 2011
I'm having issue with 881W router. this router doesnt let me logon to it after I restart the router and enter correct credentials. after being at the router - it doesn't let me logon to its AP module even after adding correct credentials. I've changed 2 routers so far but see same issue.
try to setup up credentials using: username <username> privilege 15 secret 0 <password> or username <username> priviledge 15 password 0 <password>
View 4 Replies
ADVERTISEMENT
Apr 5, 2011
i've issue with vpn 3000. can't logon with tacacs. http and ssh doesnt work. acs server logs show that authentication was successful but no luck.
don't have access to gui as well
View 2 Replies
View Related
May 13, 2012
Logon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies
View Related
Feb 22, 2013
I've recently upgraded to windows 8 and I've been having some issues with my wireless connectivity. I've narrowed it down to an issue with the wireless adapter. Specifically, windows doesn't seem to recognize my Intel centrino Advanced-N + WiMAX 6250 and instead installed drivers for Intel Centrino Advanced-N 6250 AGN. The correct driver is instead listed in "Other Devices" in the device manager.
[URL]
View 3 Replies
View Related
Sep 1, 2009
My Cisco 2811 router starts to hang & give the following error. "Original nvconfig doesn't have a correct magic number recovering from backup."I need to fix it ASAP.I've already enter common & change confreg to 0x2142 & reset but same problem occur.
View 8 Replies
View Related
Jul 28, 2012
Im wanting to add an additional module in to my Cisco 4500. Is as simple as plug and play or is there some commands that I need to add or anything I should be aware of.
View 2 Replies
View Related
Dec 14, 2011
i have question about router 2811, for now, all HWIC in 2811 is full,
Slot 0 : VIC2-2E/M
Slot 1 : VIC2-2E/M
Slot 2 : WIC-1T=
Slot 3 : HWIC-1FE
But we need add more 2 module VIC3-2E/M. can we use Network Module ? example : add one NM-HD-2V + two VIC3-2E/M ?
Can we do that? and whether it is the same as we use the VIC2-2E / M on HWIC slots
View 2 Replies
View Related
Jul 31, 2012
Trying to find some documentation as to whether there are any other steps for inserting this new module in our N7K. We have 2 blades in already and 2 Sups in 5 & 6. I'm assuming its like the 6500s, where we just slide it in and the OS configures the global parms for it and the default VLAN.
View 2 Replies
View Related
Apr 27, 2010
I have a cisco 6509 configured with a cisco NAM module. I have reset the config of the NAM module by the config clear command. Since this moment I can't no more ping the NAM module via the management port: OK via the 127.0.0.91 address and log in ok via the ios cli session command. [code] I have already tried to reboot the module via the ios cli hw module command and nothing better.
View 12 Replies
View Related
Nov 7, 2011
We got a new Cisco 2911 router (CISCO2911/K9) with a switch module (SM ES2-16-P) on it. Everything works fine after the configuration except for the power. We got 4 WAP that we will connect to the switch module that needs power. So the switch module with POE doesn't give any power out.
[code]....
View 2 Replies
View Related
Feb 22, 2012
I would like to know if there's a way to show Current-Utilization percentage within the messages generated by the Fault Management Module in LMS 4.0 [code] As you can see above CurrentUtilization percentage is not shown in Event Description section.
View 2 Replies
View Related
Jun 19, 2011
I inherited a Ciscoworks installation, and would like to create a credential set for a certain class of device. However, after searching around the interface and documentation, I cannot find instructions on how to add a credential set with certain snmp, ssh, credentials. We use ACS authentication and authorization?
View 1 Replies
View Related
Nov 6, 2011
when running Credential Verification Report, I get following notification: "None of the devices have credential verification data".I have made different Default Device Credential sets that I'm using when I add devices to LMS. I could not see wether this is bug in LMS 4.1 or if I have to do this a different way?
View 1 Replies
View Related
Nov 22, 2012
We migrated to LMS4.2 and i created new credential set and set it as the default. However, the new cdredential set applies only to newly added devices no to the migrated devices. for example when i run device credential verfication for a migrated device, the username used my LMS is "cwuser" as opposed to the one i created with the new credential sets. how can i make this new credentila set be applicable to all devices?
View 3 Replies
View Related
Aug 16, 2011
i get for all devices telnet credential failed in my credential verification report. I exported the device from the Device Manager into a csv file to verify the correct passwords.The export shows the correct values in
<DEVATTRIB Name="primary_username">cwuser</DEVATTRIB>
<DEVATTRIB Name="primary_password">secretpassword</DEVATTRIB>
View 4 Replies
View Related
Feb 20, 2011
I have a problem with my AnyConnect clients connecting to an AD network via a 5510. Anyconnect VPN clients provide AD plus a one time passcode to authenticate to the 5510. This works fine apart from 3 things:
1. Once the VPN session has been established the user is further prompted for AD credentials when accessing an AD share for the first time. Once they provide the credentials the share can be accessed. Should the AD credentials not be passed through when the VPN connection is established? Or is this by design? What makes me think it's not be design is the fact that this could be related to problem 2.
2. Group Policy Update (windows gpupdate) fails. This again suggests to me that the full client/server relationship is not fully in tact.
3. In order to get Outlook to connect to exchange I've had to change Outlooks security settings from Negotiate (which would naturally choose Keberors), to NTLM. Not sure if this is related or not.
Note: DNS is functioning with out any problems
Maybe the first 2 issues are by design, but I thought the whole idea behind the AnyConnect VPN was that the remote machine would function as if connected to the LAN?
View 1 Replies
View Related
Feb 21, 2012
I recently installed and configured the Prime LMS 4.1 Soft Appliance. After discovering the devices on the network I ran a credential verification check on everything. All of my devices passed accept for the Nexus 7010s and Nexus 5020s -- these show up in the failed device report with a BLANK value for SSH and "Did Not Try" under Enable by SSH. I have verified SSH is enabled and accessible outside of Prime, and that there are no access lists preventing access. All other tests pass for these devices.
I've also visited the troubleshooting workflow section for these devices, and when I test the connectivity, SSHv2 passes.
I've downloaded all of the updates available for the device packages and have tried other credentials. All other aspects seem to be working properly.
View 10 Replies
View Related
Jan 16, 2012
I have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.
View 5 Replies
View Related
Jan 27, 2011
The loopback of the ASR1002 is 2.2.2.2. When I use a browser to access it, I got the authentication dialog box asking for username/password. I input the information and submit. But authentication box comes back again and ask for the username/password.
The username/password is test okay. But somehow, the web GUI just does not use it.
View 2 Replies
View Related
May 22, 2012
I cannot logon with adsm anymore.when I run adsm, I type in my pw, and the screen keeps displaying "contacting the device". No timeout, just stays this way.I've updated the java version, no luck.I can connect with SSH with no problem. device = asa5550, 8.2(1) asdm 6.2(1) [code]
notice that there is no "with cookie-based authentication" here -- is this relevant?
Rebooting the device is not really an option.
View 7 Replies
View Related
Jan 23, 2012
A customer of my have a ASA5510 and want to use de Cisco VPN Client with the opties start before logon but I can find that option in the client. The computer is running on Windows 7. Does the option is still there or on with operating systems it is supported?
Also I tryed to configure it with the AnyConnect client but I can found how I simple need to configure it. I have installed on my computer the AnyConnect Client and the AnyConnect GINA but I don't seen also the option.
View 1 Replies
View Related
Mar 28, 2012
I'm running a VB Script from the logon script to add printers when users log on.The Colour printer is added no problem but the black and white printer was working but now wont.The print share names are correct and the server name is correct.
View 2 Replies
View Related
Apr 14, 2011
sbs 2003 never had updates installed till now and required reboot. it took 3 hrs to startup and now i just logon and it is still applying computer settings. i booted to safemode and changed DNS and still slow logon - going on 45min.
View 1 Replies
View Related
Jun 5, 2012
Where do you turn this option off? i have looked under security and did not see any thing.
View 1 Replies
View Related
Jan 22, 2013
I have three PCs in my lan. (A, B & C).I can access shared drives of B & C from A
I can access shared drive of A from C but cannot access B from C
I can access shared drive of C from A & B.
I get error message "Logon failure: the user has not been granted the requested logon type at this computer".
All the systems are Win 7, A & B are desktop and C is a laptop.I added the C's name in A's "Security Settings -> Local Policies -> User Rights Assignment -> Access this Computer from the Network" too. Still can't access.
View 1 Replies
View Related
Apr 11, 2012
I work in a company that has all our computers on a domain. no one of End Users is local admin. I always use remote desktop to access End Users computers,when I log in with my user name its OK but when I try to log in with End-User user name I got this message.The local policy of this system does not permit you to logon interactively.I do alot of searches and they said I have to add user name to remote access desktop group, which is difficult because I cannot add all users to the remote desktop group.when the user become a local admin to his machine , then I can access his computer remotely with his user name, and of course I cannot make all users local admins because I have to break the local admin group policy.
View 2 Replies
View Related
Apr 9, 2012
My DIR-655 has worked well for 3 months; both Ethernet and wireless. Yesterday I accidentally deleted this WiFi router from my Kindle Fire list of WiFi connections. Now, when I try to re-establish Kindle wireless logon, the router will not accept the previously used password.As a non-techno-geek, I tried to find this in the DIR-655 manual. But it is written in Greek and not oriented to the wireless user. [code]
View 3 Replies
View Related
Oct 11, 2012
I have configured a Microsoft Server 2008 R2 with Radius Server and connect it with a Cisco SG300 Switch.
If a new device connect to the switch it goes automatically to the guestnet. If a device with the correct certificate and a valid useraccount connect to the switch, the deivce goes in to the local company network.
Now my problem: If I connect a device which is in the domain and which have installed the correct certificate and want to login with a new domain user (which is not cached in windows) I can not login.
The following message appears: "There are Currently no Logon Servers Available"
I think the problem is that the authentication process only starts after a user have succsess logged in in windows.
Now I search for a solution which allows me to conntact the Logon Server for Domain Login before the User has logged in.
View 1 Replies
View Related
Mar 7, 2013
I have a wireless network infrastructure that is controlled by two WLC 5508s, Prime NCS and ISE. I have two networks for my users, an employee network and a student network. I started publishing the information for these networks via a group policy and the settings are identical, with the exception to the SSID.
My employees can logon to the employee network with no problems. I can walk up to any laptop, regardless if I have logged on to it before or not, and logon with no issues. ISE correctly profiles my account and authorizes me for the right profile. My students however are another story. Laptops that are designated for student use have the wireless network in their network list, and at the logon it shows that it will attempt to connect to the STUDENTS network. When I enter in a student username and password, it begins to login but then gives an error that says:
'There are currently no logon servers available to process the logon request'
The students cannot login at all. I can use my domain admin or my account and login to one of the units with no problem, even if I haven't logged onto the unit before with that account.
I don't know if this is an ISE issue or some other type of issue. I'm leaning towards ISE being the issue, since its what is passing authentication through to the domain. I have my students all in groups and I have those groups added to ISE, just like I have my employees added.
View 2 Replies
View Related
Dec 17, 2010
I am implementing mGRE with DMVPN so multicast traffic can be delivered to employee homes over Internet, everything worked fine except that I can not configure PIM or ICMP static groups on C881W's mGRE tunnel interface or BVI interface(RIPv2 works on mGRE interface however), configuring "ip multicast-routing" did not give me any errors, do I need license to be about to configure PIM/IGMP? I am running C880data-universalk9.mz.124-20.T5.bin" with license level advsecurity.
View 3 Replies
View Related
Oct 27, 2012
i have two servers that is Primary domain Controller and File Server. When i remove the client computer from the domain and try to rejoin the domain again it refuses, when i ping it replies. i can not assess files in the file server It prompt"Logon Failure: the target account name is incorrect" Suprisingly When i logon in other clients its OK. but some clients give ths said error though the communication with the server is fine
View 1 Replies
View Related
Jul 16, 2012
I removed my computer from a domain to a workgroup,I then rebooted the pc and now it si asking me for a username and password.I can not access important information on the local drive.
View 1 Replies
View Related
Jun 10, 2011
i have a user running Windows xp pro, the problem is one of his network drives does not re-connect at logon, all the other drives re-connect but for some reason this one does not, the network drive is on a windows server and does not require different logon credentials than his windows logon.
View 1 Replies
View Related
