Local Policy Of System Logon Interactively
Apr 11, 2012
I work in a company that has all our computers on a domain. no one of End Users is local admin. I always use remote desktop to access End Users computers,when I log in with my user name its OK but when I try to log in with End-User user name I got this message.The local policy of this system does not permit you to logon interactively.I do alot of searches and they said I have to add user name to remote access desktop group, which is difficult because I cannot add all users to the remote desktop group.when the user become a local admin to his machine , then I can access his computer remotely with his user name, and of course I cannot make all users local admins because I have to break the local admin group policy.
View 2 Replies
ADVERTISEMENT
May 13, 2012
Logon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies
View Related
Jan 16, 2011
I'm trying to get an HP laptop running Win7 to see a desktop running WinXP on my network (both wired and wireless) When I run the troubleshooter in Win7, it tells me "system clock does not match local time" as the reason. I have a Belkin wireless router attached to my cable router. I have updated the system clock via the internet on the desktop and checked the time setting in BIOS. These seem to match. I have googled around on this and can't find any accounts similar. My son's Vista laptop and the Win7 laptop have seen each other since day one. The laptop and desktop did see each other at one time, but the connection was lost after I went to a hotel and changed public network settings temporarily. I can ping the desktop from the laptop, but it times out when pinging the laptop from the desktop. I'm running an avast firewall on both, but can't see a problem there.
View 6 Replies
View Related
Jun 20, 2011
How to convert local lan connection in wireless connection.
View 1 Replies
View Related
Dec 12, 2012
I can make some "local policy" with client of SSL VPN AnyConnect and block access to internet?
The user would only have access to the internet if he was connected to the VPN (by internal proxy).
View 10 Replies
View Related
Jun 23, 2011
I tried to use the Dell on a local wifi system with no luck and now I've done something and can't log into the computer. I've tried every user name and password I can think of.
View 2 Replies
View Related
Aug 7, 2011
My local area network connection disappeared from system tray
View 4 Replies
View Related
Jan 27, 2011
The loopback of the ASR1002 is 2.2.2.2. When I use a browser to access it, I got the authentication dialog box asking for username/password. I input the information and submit. But authentication box comes back again and ask for the username/password.
The username/password is test okay. But somehow, the web GUI just does not use it.
View 2 Replies
View Related
Mar 28, 2012
I'm running a VB Script from the logon script to add printers when users log on.The Colour printer is added no problem but the black and white printer was working but now wont.The print share names are correct and the server name is correct.
View 2 Replies
View Related
Apr 14, 2011
sbs 2003 never had updates installed till now and required reboot. it took 3 hrs to startup and now i just logon and it is still applying computer settings. i booted to safemode and changed DNS and still slow logon - going on 45min.
View 1 Replies
View Related
Jan 22, 2013
I have three PCs in my lan. (A, B & C).I can access shared drives of B & C from A
I can access shared drive of A from C but cannot access B from C
I can access shared drive of C from A & B.
I get error message "Logon failure: the user has not been granted the requested logon type at this computer".
All the systems are Win 7, A & B are desktop and C is a laptop.I added the C's name in A's "Security Settings -> Local Policies -> User Rights Assignment -> Access this Computer from the Network" too. Still can't access.
View 1 Replies
View Related
Apr 9, 2012
My DIR-655 has worked well for 3 months; both Ethernet and wireless. Yesterday I accidentally deleted this WiFi router from my Kindle Fire list of WiFi connections. Now, when I try to re-establish Kindle wireless logon, the router will not accept the previously used password.As a non-techno-geek, I tried to find this in the DIR-655 manual. But it is written in Greek and not oriented to the wireless user. [code]
View 3 Replies
View Related
May 22, 2012
I cannot logon with adsm anymore.when I run adsm, I type in my pw, and the screen keeps displaying "contacting the device". No timeout, just stays this way.I've updated the java version, no luck.I can connect with SSH with no problem. device = asa5550, 8.2(1) asdm 6.2(1) [code]
notice that there is no "with cookie-based authentication" here -- is this relevant?
Rebooting the device is not really an option.
View 7 Replies
View Related
Jan 23, 2012
A customer of my have a ASA5510 and want to use de Cisco VPN Client with the opties start before logon but I can find that option in the client. The computer is running on Windows 7. Does the option is still there or on with operating systems it is supported?
Also I tryed to configure it with the AnyConnect client but I can found how I simple need to configure it. I have installed on my computer the AnyConnect Client and the AnyConnect GINA but I don't seen also the option.
View 1 Replies
View Related
Oct 27, 2012
i have two servers that is Primary domain Controller and File Server. When i remove the client computer from the domain and try to rejoin the domain again it refuses, when i ping it replies. i can not assess files in the file server It prompt"Logon Failure: the target account name is incorrect" Suprisingly When i logon in other clients its OK. but some clients give ths said error though the communication with the server is fine
View 1 Replies
View Related
Jul 16, 2012
I removed my computer from a domain to a workgroup,I then rebooted the pc and now it si asking me for a username and password.I can not access important information on the local drive.
View 1 Replies
View Related
Jun 10, 2011
i have a user running Windows xp pro, the problem is one of his network drives does not re-connect at logon, all the other drives re-connect but for some reason this one does not, the network drive is on a windows server and does not require different logon credentials than his windows logon.
View 1 Replies
View Related
May 17, 2012
I have a gmail site,For some reason, I am unable to log into the site.
View 2 Replies
View Related
Sep 13, 2011
I have 2 separate networks. One is a DSL circuit, the other is a T1. How do I enable the two networks to logon to the same domain, but use each of their own gateways for internet access?
View 5 Replies
View Related
Sep 10, 2012
I'm having getting my E1200 to work is this; I'm connected wirelessly with an N-adapter to the router, my roomate is connected directly with an Ethernet cable and to the modem. Whenever he logs ons or logs off from internet I GET DISCONNECTED! Its very frustrating. At first I kept wondering why I would get frequent Disconnects, until I matched exactly the times he would log on or log off. I've never seen this type of problem before in my previous router?
View 9 Replies
View Related
Nov 16, 2010
I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.
View 8 Replies
View Related
Apr 5, 2011
i've issue with vpn 3000. can't logon with tacacs. http and ssh doesnt work. acs server logs show that authentication was successful but no luck.
don't have access to gui as well
View 2 Replies
View Related
Jun 5, 2012
Where do you turn this option off? i have looked under security and did not see any thing.
View 1 Replies
View Related
Feb 8, 2012
I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies
View Related
Jul 15, 2011
How do I find the guest logon password?
View 3 Replies
View Related
Oct 11, 2012
I have configured a Microsoft Server 2008 R2 with Radius Server and connect it with a Cisco SG300 Switch.
If a new device connect to the switch it goes automatically to the guestnet. If a device with the correct certificate and a valid useraccount connect to the switch, the deivce goes in to the local company network.
Now my problem: If I connect a device which is in the domain and which have installed the correct certificate and want to login with a new domain user (which is not cached in windows) I can not login.
The following message appears: "There are Currently no Logon Servers Available"
I think the problem is that the authentication process only starts after a user have succsess logged in in windows.
Now I search for a solution which allows me to conntact the Logon Server for Domain Login before the User has logged in.
View 1 Replies
View Related
Mar 7, 2013
I have a wireless network infrastructure that is controlled by two WLC 5508s, Prime NCS and ISE. I have two networks for my users, an employee network and a student network. I started publishing the information for these networks via a group policy and the settings are identical, with the exception to the SSID.
My employees can logon to the employee network with no problems. I can walk up to any laptop, regardless if I have logged on to it before or not, and logon with no issues. ISE correctly profiles my account and authorizes me for the right profile. My students however are another story. Laptops that are designated for student use have the wireless network in their network list, and at the logon it shows that it will attempt to connect to the STUDENTS network. When I enter in a student username and password, it begins to login but then gives an error that says:
'There are currently no logon servers available to process the logon request'
The students cannot login at all. I can use my domain admin or my account and login to one of the units with no problem, even if I haven't logged onto the unit before with that account.
I don't know if this is an ISE issue or some other type of issue. I'm leaning towards ISE being the issue, since its what is passing authentication through to the domain. I have my students all in groups and I have those groups added to ISE, just like I have my employees added.
View 2 Replies
View Related
Mar 20, 2013
Region : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 2013 firmware update
ISP : PlusNet
I changed the local port to 8080 for accessing the web logon page (i.e. 192.168.1.1) instead of its default port 80.
[code]....
View 2 Replies
View Related
Feb 17, 2012
I updated to Firmware Version: 1.0.04. And now I can't logon to the router when my storage device is turned on. However, I can logon to the router when the device is off. If I turn the power on the storage device and try to navigate the router it says ".....Can't establish a connection to the server at 192.168.1.1." Then I have to reboot the router to be able to log back on.
View 3 Replies
View Related
Sep 6, 2012
I completed the PIX 515 to ASA 5505 migration today with no problems - ok one problem with the logon for ASDM. I'm trying no username and password - then using username and password from the 515 Pix with no success. How to reset the username and password for the ASDM GUI website.
View 3 Replies
View Related
Mar 18, 2011
I'm having issue with 881W router. this router doesnt let me logon to it after I restart the router and enter correct credentials. after being at the router - it doesn't let me logon to its AP module even after adding correct credentials. I've changed 2 routers so far but see same issue.
try to setup up credentials using: username <username> privilege 15 secret 0 <password> or username <username> priviledge 15 password 0 <password>
View 4 Replies
View Related
May 16, 2012
I am trying to get anyconnect 3.0.07059 to run start before logon on windows 7 connecting to an ASA5540 running firmware 8.2.
The anyconnect starts fine, but will not connect. If I login to the laptop then run the anyconnect , same setup it connects fine.
View 2 Replies
View Related
Apr 22, 2012
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies
View Related
