Cisco :: LMS 4.0 Device Credential And Repository Showing As Empty?
Jan 16, 2012
I have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.
View 5 Replies
ADVERTISEMENT
Aug 16, 2011
i get for all devices telnet credential failed in my credential verification report. I exported the device from the Device Manager into a csv file to verify the correct passwords.The export shows the correct values in
<DEVATTRIB Name="primary_username">cwuser</DEVATTRIB>
<DEVATTRIB Name="primary_password">secretpassword</DEVATTRIB>
View 4 Replies
View Related
Nov 16, 2011
I replaced old cisco router 2811 with new one 2921 , all works except crypto map VPNs routers can ping each other , ACLs are not applied to outbound interfaces show crypto isakmp sa is empty after i make same configuration on a new router 2921 config.
View 1 Replies
View Related
Oct 9, 2011
Allthough we see all our devices in Inventory Portlets, we cant access devices via device selector neither in CM, RME, DFM ...OGSserver is running?
View 2 Replies
View Related
Sep 29, 2011
I have added all of the devices to DCR and they show up with their hostname value in all of the device trees except for the fault manager views. In all of the fault manager views the hostname is not being used for the Devie Name field, rather the IP address is being used.
View 6 Replies
View Related
Mar 28, 2012
My wireless has just gone it is not recognized in the device manager and a USB Device not Recognized pop up is showing up.i restart it a couple of times and once it did showed up but after i did it again it was gone again.i have a Toshiba laptop l300
View 3 Replies
View Related
Mar 5, 2012
No network adapter showing in device manager
View 2 Replies
View Related
Apr 27, 2011
i've just upgraded my graphic card and now i don't have any network adapters listed in the device manager (only firewire under +IEEE 1394 and all the other devices) I've already reinstalled Windows 7 (64 Bit) and tried installing another LAN card (10/100) - that wasn't recognized.
Within the BIOS (award- Motherboard- GA-P35-DS4 ) i couldn't find anything related that should be turned off/on? [URL]
Could it be broken if it is not appearing there? If yes- why isn't the motherboard recognizing my other LAN Adapter that i've installed on the bottom slot
Should i reset the Bios by pulling the battery/using the cmos jumper?
View 4 Replies
View Related
Nov 3, 2011
I recently ordered and received Cisco Catalyst 3560-CG Series 8-port PoE switches (ws-C3560CG-8PC-S). In running the Cisco Network Assistant (Version 5.6(3)) they show up as an unsupported device. The documentation for this product indicates that you can use CNA to configure this switch. Is there a download or patch available to correct this problem?
View 8 Replies
View Related
Dec 6, 2011
In asus router model rt-n10, there is a client list when you bring up 192.168.1.1 showing names of devices also mac addresses and ip addresses. How do I add names to the list so I know which devices are using what ip etc. I have tried the advanced settings in the router to see if I can do it this way , but no luck.
View 1 Replies
View Related
Sep 13, 2012
after installing xp my wireless card doesnt show in device manager
View 8 Replies
View Related
Feb 4, 2011
My Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies
View Related
Sep 13, 2012
I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
View 1 Replies
View Related
Nov 27, 2012
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
View 7 Replies
View Related
Apr 26, 2011
I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies
View Related
Mar 13, 2013
I am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies
View Related
Feb 22, 2013
I recently formated my dell xps l502 system and installed with windows 7 Os.after that my Lan and Wifi are not working.when i did the ip config /all.it is showing only the following options.
-HPrimary DNS suffix :
-NodeTYpe: Hybrid
-IP Routing enabled :no
-WInsx Proxy Enabled : no
View 5 Replies
View Related
Jan 5, 2013
I have an acer M5641 desktop and i do not have a network adapter , i reinatall windows 7 basic premium and no success
View 1 Replies
View Related
Sep 26, 2012
Experienced problems with guest network not showing up as an available network on a device (laptop, iPad, etc)?I double checked if guest network is enabled on a EA3500 router. What other steps can I take?
View 5 Replies
View Related
May 2, 2013
I have the WRT400N router with the latest firmware. Recently I have noticed a device in my DHCP that I do not recognize. It is not device I own (believe me, I have racked my brain and confirmed) as it shows as an Acer pc. I cannot ping the IP address however. I have rebooted my router several times thinking maybe it's a former connected device but saved in memory but it keeps coming back. I am thinking possibly it is someone hi-jacking my Internet, but not sure. I am using WEP security but it shows a LAN connection which is strange for a wireless device. The only hard wired pc is my HP.
View 3 Replies
View Related
Jan 28, 2012
I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies
View Related
Oct 29, 2012
I am using Dell Inspiron N4010 for more than a year now. It was running good. At office i am using wi -fi and at home i was using through cable connection. Fer last few days my wired connection was not working and i got all cable checked and replaced, but could not solve the problem. Then i found that in device manager, network adapters, its not showing and wired adapter. Only wi-fi and blue tooth adapters are there. I can still connect to internet at office via wi fi but its not working at home now with wired connection.I am not able to understand how it stops working and why its not showing in device manage (Network adapters).Yes one more thing i want to disclose is that earlier i have only one drive i.e. c drive wich few days back i compressed and created another drive.
View 4 Replies
View Related
May 16, 2012
This is a new install of LMS 4.2 evaluation. I have a current install of LMS 3.2 which is working. When I run an Add job for our core 6509 in Software Repository using cisco.com on the 3.2 LMS it works normally. When I attempt the same job in LMS 4.2 for the same device the device is not selectable in the left hand window and it has a message that says (This operation requires Containment data in Inventory. Either this is unavailable) Or (Add Image from CCO not supported). Also and probably related is that LMS 4.2 cannot complete an inventory update on the 6509s that we have and does not say why the inventory job collection failed. So far as I can tell the other devices inventory and offer IOS updates correctly. I ran a job to get all device package updates before I ran any of the jobs. The devices all pass credential checks except for HTTP, which is not activated on the devices.
View 4 Replies
View Related
Jun 8, 2011
I have a problem with LMS s/w backup procedure. It outputs the following error: SWIM0036: Could not add this image to software repository.
View 8 Replies
View Related
Oct 8, 2012
Recently we upgraded a switch with an image from the repository in LMS. After the installation of the image it seemed corrupt.
My question now is : Can we do a MD5 checksum on all the images in the local repository to verify that all images are ok to use?
View 2 Replies
View Related
Jan 10, 2011
I upgraded to firmware version 1.0.03 I started to have this weird issue: I have four PCs connected to this wireless router via wireless G. They all run Windows 7 Home Premium. After a few hours I started to notice that the DHCP client table is empty even if all four PCs are connected to the internet. This causes a networking problem because one of the PC serves as a file server and it grants access by IP addresses. Not being able to "see" those computers, my access is denied.
View 2 Replies
View Related
Aug 14, 2011
I have two ACS1152 appliances running as a redundant pair. I notices that secondary box keeps losing its repository information in the config.
View 2 Replies
View Related
Jun 19, 2011
I inherited a Ciscoworks installation, and would like to create a credential set for a certain class of device. However, after searching around the interface and documentation, I cannot find instructions on how to add a credential set with certain snmp, ssh, credentials. We use ACS authentication and authorization?
View 1 Replies
View Related
Nov 6, 2011
when running Credential Verification Report, I get following notification: "None of the devices have credential verification data".I have made different Default Device Credential sets that I'm using when I add devices to LMS. I could not see wether this is bug in LMS 4.1 or if I have to do this a different way?
View 1 Replies
View Related
Feb 15, 2012
I have just installed LMS 4.1 on a Win2008serverR2. Getting started and discovery are OK. Then I tried to configure all parameters under the Admin Menu. I have a problem with SWIM : the "repository" directory does not exist ! I also tried to import an IOS file into the repository : no way.
View 3 Replies
View Related
Nov 22, 2012
We migrated to LMS4.2 and i created new credential set and set it as the default. However, the new cdredential set applies only to newly added devices no to the migrated devices. for example when i run device credential verfication for a migrated device, the username used my LMS is "cwuser" as opposed to the one i created with the new credential sets. how can i make this new credentila set be applicable to all devices?
View 3 Replies
View Related
Feb 20, 2011
I have a problem with my AnyConnect clients connecting to an AD network via a 5510. Anyconnect VPN clients provide AD plus a one time passcode to authenticate to the 5510. This works fine apart from 3 things:
1. Once the VPN session has been established the user is further prompted for AD credentials when accessing an AD share for the first time. Once they provide the credentials the share can be accessed. Should the AD credentials not be passed through when the VPN connection is established? Or is this by design? What makes me think it's not be design is the fact that this could be related to problem 2.
2. Group Policy Update (windows gpupdate) fails. This again suggests to me that the full client/server relationship is not fully in tact.
3. In order to get Outlook to connect to exchange I've had to change Outlooks security settings from Negotiate (which would naturally choose Keberors), to NTLM. Not sure if this is related or not.
Note: DNS is functioning with out any problems
Maybe the first 2 issues are by design, but I thought the whole idea behind the AnyConnect VPN was that the remote machine would function as if connected to the LAN?
View 1 Replies
View Related
Feb 21, 2012
I recently installed and configured the Prime LMS 4.1 Soft Appliance. After discovering the devices on the network I ran a credential verification check on everything. All of my devices passed accept for the Nexus 7010s and Nexus 5020s -- these show up in the failed device report with a BLANK value for SSH and "Did Not Try" under Enable by SSH. I have verified SSH is enabled and accessible outside of Prime, and that there are no access lists preventing access. All other tests pass for these devices.
I've also visited the troubleshooting workflow section for these devices, and when I test the connectivity, SSHv2 passes.
I've downloaded all of the updates available for the device packages and have tried other credentials. All other aspects seem to be working properly.
View 10 Replies
View Related
