My wireless has just gone it is not recognized in the device manager and a USB Device not Recognized pop up is showing up.i restart it a couple of times and once it did showed up but after i did it again it was gone again.i have a Toshiba laptop l300
View 3 Repliesi've downgraded my notebook toshiba satellite pro l300 22p from vista to Xp-pro, don't have the drivers and utilities cd, now the network adapter is off n i cant connect to lan and donot know which drivers to download. i tried the realtek lan drivers from the manufactures site specific for my laptop.
View 4 Replies View RelatedI have a Toshiba Satellite Pro L300-154 and for two years our wireless internet disconnects constantly sometimes for upto an hour. I have tried to diagnose and repair, system restore. The wireless connection shows up but when you try to connect it says:
Windows cannot connect to ...
Diagnose the problem
or
Conect to a different network
[code]....
I have checked my provider and the wireless works continously on both mobile phones, so Im sure its the computer.
my wireless connection has stopped working and won't repair itself.I have uninstalled it and rebooted my laptop (as suggested in a previous thread) but it's still not working. I have a Toshiba Satallite Pro L300 laptop.I went to the Toshiba site to find a download for the wireless adaptor but couldn't even find my model number on their system. I can get on the internet by plugging directly to the modem, and my internet provider suggests it must be the adaptor. I'm too scared to randomly download stuff from internet in case it is rubbish and mucks up my computer.
View 13 Replies View RelatedI just got this av to cat5 converter [URL]? and was thinking i could use a router on each end so it could be wireless. But the way they work the router does not see the converter when it is plugged in.
View 9 Replies View RelatedI'm running on LMS 3.2 and RME 4.3.0 and one type of device was not recognized.this is NME-X-23ES-1G (IOS : 12.2(35)SE5) in a 3825 url... this module is supported with the OID 1.3.6.1.4.1.9.1.703,but in the device center I've found something which seems to be the right equipement :
- Cisco Interfaces and modules
- Cisco Network Modules
- Cisco 2800,3800 series 23-port EtherSwith Service module with OID 1.3.6.1.4.1.9.1.664
We have a Hawking HPS12U device that we are using as the print server for our HP Laser 4L printer. We just installed a new Belkin N600 DB router and now the Hawking device is not being recognized. I am using Windows 7. I tried downloading “software_HPS12URevB.exe” and it still does not work.
View 1 Replies View RelatedI installed windows 8 X64 on dell inspiron 5220 and it didn't recognized the wireless device .It also rejects its win7 driver due to known comparability issue. Where can I find the driver?
View 1 Replies View Relatedi cannot seem to find my wireless network card in device manager? i have tried to download the driver from toshiba but it still dosent seeem to be sorting it. i am having to do this because i have performed a fresh install of windows 7 on my laptop.
View 3 Replies View RelatedNo network adapter showing in device manager
View 2 Replies View Relatedi've just upgraded my graphic card and now i don't have any network adapters listed in the device manager (only firewire under +IEEE 1394 and all the other devices) I've already reinstalled Windows 7 (64 Bit) and tried installing another LAN card (10/100) - that wasn't recognized.
Within the BIOS (award- Motherboard- GA-P35-DS4 ) i couldn't find anything related that should be turned off/on? [URL]
Could it be broken if it is not appearing there? If yes- why isn't the motherboard recognizing my other LAN Adapter that i've installed on the bottom slot
Should i reset the Bios by pulling the battery/using the cmos jumper?
In asus router model rt-n10, there is a client list when you bring up 192.168.1.1 showing names of devices also mac addresses and ip addresses. How do I add names to the list so I know which devices are using what ip etc. I have tried the advanced settings in the router to see if I can do it this way , but no luck.
View 1 Replies View Relatedafter installing xp my wireless card doesnt show in device manager
View 8 Replies View RelatedMy Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies View RelatedI have added all of the devices to DCR and they show up with their hostname value in all of the device trees except for the fault manager views. In all of the fault manager views the hostname is not being used for the Devie Name field, rather the IP address is being used.
View 6 Replies View RelatedI have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.
View 5 Replies View RelatedI'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies View RelatedI recently ordered and received Cisco Catalyst 3560-CG Series 8-port PoE switches (ws-C3560CG-8PC-S). In running the Cisco Network Assistant (Version 5.6(3)) they show up as an unsupported device. The documentation for this product indicates that you can use CNA to configure this switch. Is there a download or patch available to correct this problem?
View 8 Replies View RelatedI am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies View RelatedI recently formated my dell xps l502 system and installed with windows 7 Os.after that my Lan and Wifi are not working.when i did the ip config /all.it is showing only the following options.
-HPrimary DNS suffix :
-NodeTYpe: Hybrid
-IP Routing enabled :no
-WInsx Proxy Enabled : no
I have an acer M5641 desktop and i do not have a network adapter , i reinatall windows 7 basic premium and no success
View 1 Replies View RelatedExperienced problems with guest network not showing up as an available network on a device (laptop, iPad, etc)?I double checked if guest network is enabled on a EA3500 router. What other steps can I take?
View 5 Replies View RelatedI have the WRT400N router with the latest firmware. Recently I have noticed a device in my DHCP that I do not recognize. It is not device I own (believe me, I have racked my brain and confirmed) as it shows as an Acer pc. I cannot ping the IP address however. I have rebooted my router several times thinking maybe it's a former connected device but saved in memory but it keeps coming back. I am thinking possibly it is someone hi-jacking my Internet, but not sure. I am using WEP security but it shows a LAN connection which is strange for a wireless device. The only hard wired pc is my HP.
View 3 Replies View RelatedI have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies View RelatedI am using Dell Inspiron N4010 for more than a year now. It was running good. At office i am using wi -fi and at home i was using through cable connection. Fer last few days my wired connection was not working and i got all cable checked and replaced, but could not solve the problem. Then i found that in device manager, network adapters, its not showing and wired adapter. Only wi-fi and blue tooth adapters are there. I can still connect to internet at office via wi fi but its not working at home now with wired connection.I am not able to understand how it stops working and why its not showing in device manage (Network adapters).Yes one more thing i want to disclose is that earlier i have only one drive i.e. c drive wich few days back i compressed and created another drive.
View 4 Replies View RelatedI upgraded to firmware version 1.0.03 I started to have this weird issue: I have four PCs connected to this wireless router via wireless G. They all run Windows 7 Home Premium. After a few hours I started to notice that the DHCP client table is empty even if all four PCs are connected to the internet. This causes a networking problem because one of the PC serves as a file server and it grants access by IP addresses. Not being able to "see" those computers, my access is denied.
View 2 Replies View Relatedmy computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedThe onboard NIC on my Asrock Extreme6 Z77 has stopped working. I had recently moved my system in to a newer and better home, and after moving it in to the new case the NIC stopped working. I had originally thought that I may have zapped it, but looking at the device manager I saw that it was enabled and recognized by Windows. So I tried some trouble shooting.
- Uninstall and re-install drivers.
- Different cables (5 in total, 3 of which work on other machines)
- Disable and re-enable.
- Went out and bought a wireless USB, allowed me to connect to the internet this way.Then yesterday it started to work again after not using the computer for most of the day.Could play some Battlefield 3, and about 2 hours in to gameplay it stopped working.Ran trouble shoot on Windows, something quickly popped up saying something about ip wasn't reconfigured/updated/some BS like that.Finished for the night happy it was working again and then came back on tonight and now it's not working again.
- Updated BIOS.
- Deleted McAfee
- Verified it was turned on in UEFI (doesn't show connected in system browser in UEFI)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Crosby-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
I just installed a fresh copy of Windows XP Pro SP3 on one computer. Now my other PC has Windows7. I connected the two with a LAN cable, and in 'Network' the Windows 7 PC picks up the shared folder of the XP PC automatically, but the XP PC does not show the Windows 7 Shared(Public) folder. Can it be the Antivirus? XP PC has MS Security Essentials and Windows 7 PC has ESET.
View 1 Replies View RelatedYesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.
I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband. A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.it works with a Zoom router, but not the Netgear.
View 3 Replies View Related