The onboard NIC on my Asrock Extreme6 Z77 has stopped working. I had recently moved my system in to a newer and better home, and after moving it in to the new case the NIC stopped working. I had originally thought that I may have zapped it, but looking at the device manager I saw that it was enabled and recognized by Windows. So I tried some trouble shooting.
- Uninstall and re-install drivers.
- Different cables (5 in total, 3 of which work on other machines)
- Disable and re-enable.
- Went out and bought a wireless USB, allowed me to connect to the internet this way.Then yesterday it started to work again after not using the computer for most of the day.Could play some Battlefield 3, and about 2 hours in to gameplay it stopped working.Ran trouble shoot on Windows, something quickly popped up saying something about ip wasn't reconfigured/updated/some BS like that.Finished for the night happy it was working again and then came back on tonight and now it's not working again.
- Updated BIOS.
- Deleted McAfee
- Verified it was turned on in UEFI (doesn't show connected in system browser in UEFI)
I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.
I am looking at deploying a pair of 5585X's in an active/active multiple context state. I am creating Mulitple contexts that need to be able to route to each other. I was going to deploy a type of Gateway context that has a shared interface to all of the other contexts, instead of sharing interfaces directly between the contexts, i beleive this will work as basically i am just cascadng the contexts and sharing interfaces.
The main problem i have come across, is that if i deploy active/active across two appliances using 2 failover groups i can not see a way to route between them, for example.
I have Context 1, Context 2 and Context GW A including the shared interfaces of Con1 and Con2 in failover group 1 on appliance A with the respective standbys on Appliance 2. I have Context 2, Context 4 and Context GW B including the shared interfaces of Con 3 and Con 4 in failover group 2 on appliance B with the respective standbys on Appliance 1.
I need to be able to route traffic between Context GW A and GW B so that the contexts can communicate in normal operation and in failover. I do not beleive that I can share an interface between contexts in two separate failover groups and to be honest without adding a L3 device between the appliances i am not sure if this is possible.
I have two ASA 5510s running in Active/Active mode. I need to make config changes on them. How do I go about it? Do I power off the secondary ASA and make the config changes on the primary and then power on the secondary ASA ? Or this another way to do this?
I have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?
The 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.
I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.
I faced one problem in our core switch 4507 R . Active sup lost connection and standby came active. We got lot of errors/alerts on console shown below. [Code] Also when I reloaded the switch with reload command only both sups got reloaded but I want to reload all the modules but reload command do not gives any options for that.
I have 2 asa 5520 firewalls including and 1 AIP-SSM-10 module in each of them. the configuration is set using active/active failover and context mode.
Both of them run individualy the IPS module. The IPS is configured using inline mode and fail-open option. However when one of the module fails and the state is changing from up to init or anything else making the IPS to fail then failover is detected and ASA consider it as failover and bounce context to the other unit.
IPS soft is 6.0(4) and ASA soft is 8.0(3)
I have checked cisco doc and it is confusing to me. it says: "The AIP-SSM does not participate in stateful failover if stateful failover is configured on the ASA failover pair." but it really does participate. Running is not really an option because of production network impact matter..
We have an Active/Active ASA 5520 setup, as i know in Active/Active setup there is no remote VPN access, So i could overcome this limitations?I have a solution but i dont know if it is ablecable or not? we have a spare ASA 5510, so i can use it behind Active/Active Firewalls and assign a public static NAT IP address to it and open all IPSEC and VPN ports and let the remote users to connect to it, is this ablecable setup or not?
I just installed a fresh copy of Windows XP Pro SP3 on one computer. Now my other PC has Windows7. I connected the two with a LAN cable, and in 'Network' the Windows 7 PC picks up the shared folder of the XP PC automatically, but the XP PC does not show the Windows 7 Shared(Public) folder. Can it be the Antivirus? XP PC has MS Security Essentials and Windows 7 PC has ESET.
Yesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.
I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband. A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.it works with a Zoom router, but not the Netgear.
An older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.
We had a little family get together at my house which involved 2 smart phones and an iphone-(people were browsing using our unsecured router) and now the wireless router is not recognized by our pc's; it's like the wireless address just disappeared.
I just got this av to cat5 converter [URL]? and was thinking i could use a router on each end so it could be wireless. But the way they work the router does not see the converter when it is plugged in.
I have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.
I have a computer that runs windows 7, and I run an ethernet cable from netgear router into my computer. It used to run fine, but all of a sudden it stopped recognizing the ethernet cable, and I can not access internet.
I know it is not the cable because I can plug in the same ethernet cable to my laptop (runs XP) and it recognizes and I can access internet.
Also, I know it's not the slot on the router because because I switched places with my other ethernet cable that plugs into Netgear Powerline Ethernet Adapter for my Xbox, and the slot recognizes the adapter just fine.
So I am thinking it has to do something with Win 7 or the computer. My computer does have the wireless capability, and I am running it on wireless right now.
I have never had to do anything to connect to my fathers netgear router or my own netgear router. I would just turn on my pc and have internet. After my brother touched my computer it no longer recognizes any wireless connection. My internet provider says that I need a new router. I don't think that is the problem because after my brother played with my computer it was unable to see any connections (not even neighbors which I normally see). This makes me think something is wrong with my computer not the router.
PS. I do have my wireless switch turned to on. My brother doesn't know what he did but will not be allowed to play with it again.
I have tried 3 cables and all three are not recognized even though they are plugged in. I have uninstalled network adapter and re installed it and i have updated the driver still nothing so i don't know what to do next.my laptop is a hp pavilion g6 series
I am trying to setup a hard drive through my network to be recognized on all my devices.Here is what I have:
router: Belkin n300 max share F7D7301 modem: RCA cable modem Internet provider: Teksavvy (through a Rogers line) Hard drive: WD Elements 2TB HD (formatted NTFS) Antivirus: AVG Free ps3 laptop (running xp) galaxy s3
The ps3 is wired into the router, the laptop and s3 are wireless. I have connected my hard drive to one of the USB drives on the router. I can see the HD and view any of its content (movies and music) on the laptop, but nothing else. My ps3 and s3 are connected to the internet, however I can't find the drive.
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband.
A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.
Funny thing is that it works with a Zoom router, but not the Netgear There must be settings on the Netgear that needs changing
Ever since moving back in with my dad, I haven't been able to connect directly to the modem. I can connect to the wireless network, but whenever I try and plug straight into the modem, nothing changes and I stay on the wireless. I'm running Windows 7?
My computer specs are as follows (directly from the TSG SysInfo application):
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 3766 Mb Graphics Card: Intel(R) HD Graphics, 1755 Mb Hard Drives: C: Total - 476837 MB, Free - 162910 MB; Motherboard: Acer, Aspire 5742G Antivirus: avast! Antivirus, Updated and Enabled
I'm running on LMS 3.2 and RME 4.3.0 and one type of device was not recognized.this is NME-X-23ES-1G (IOS : 12.2(35)SE5) in a 3825 url... this module is supported with the OID 1.3.6.1.4.1.9.1.703,but in the device center I've found something which seems to be the right equipement :
- Cisco Interfaces and modules - Cisco Network Modules - Cisco 2800,3800 series 23-port EtherSwith Service module with OID 1.3.6.1.4.1.9.1.664
I have Prime 4.1 on windows with the latest update, it is up and running except for few devices ASR903 routers that are not being recognized in the Fault (DFM). These devices are supported in this release, The fault is showing that the devices are stuck at 10% learning state. The strange issue is that when i click on the routers that are in the learning state some shows in the device type as N/A ans others are showing "routers". Anyway i followed the steps mentioned in "How can I troubleshoot device discovery stuck at 10%"
I have a 2921 router, with UCK9 services on it. I've installed a VWIC2-2MFT but the system is not seeing it. I've been told there is a command required to enable the card, is this true? I've always done most of my UC work on the 2800 range and never had to run an enable command, it just saw the card.
I noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
We have CAM/CAS 4.8.2, NAC agent 4.8.2.3 and compliance module 3.4.27.1. AVG 2012 cannot be recognized by NAC agent. From the link below, it should work: [URL].
in the past my laptop has been able to connect directly to the internet using an Cat5e cable, but recently when I have been trying to direct connect, I have been unable to, and not sure when the problem started because I always used WiFi and it worked great. I do a lot of messing around, not only with my network, but with my laptop settings also, so something might have gone bunko. I have done much troubleshooitng, such as trying to update drivers, checking to see if the hardware was disabled, etc...
