PS3 / Setup HD Through Network To Be Recognized On All Devices?
Aug 4, 2012
I am trying to setup a hard drive through my network to be recognized on all my devices.Here is what I have:
router: Belkin n300 max share F7D7301
modem: RCA cable modem
Internet provider: Teksavvy (through a Rogers line)
Hard drive: WD Elements 2TB HD (formatted NTFS)
Antivirus: AVG Free
ps3
laptop (running xp)
galaxy s3
The ps3 is wired into the router, the laptop and s3 are wireless. I have connected my hard drive to one of the USB drives on the router. I can see the HD and view any of its content (movies and music) on the laptop, but nothing else. My ps3 and s3 are connected to the internet, however I can't find the drive.
View 3 Replies
ADVERTISEMENT
Apr 8, 2012
I replaced a WRT120N router with a new one thinking that the old one was damaged. During setup, the router wasn't recognized. I used the same connection for a line from the internet to my LAN connectin and the line works fine. Connecting through the router is no good.
View 1 Replies
View Related
Jun 20, 2010
I just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
View 9 Replies
View Related
Aug 3, 2011
I just got this av to cat5 converter [URL]? and was thinking i could use a router on each end so it could be wireless. But the way they work the router does not see the converter when it is plugged in.
View 9 Replies
View Related
Sep 15, 2011
This will be rather difficult as i'm on a cell phone. Anyways i'm unable to get my computer to recognize that an ethernet cable is connected. I know that the cable is good is i've used it with my girlfriends computer with on problems. I've blowed out the port, used two different cords. Apart from connecting to the internet (which i can't atm) i have no idea what to do.
View 12 Replies
View Related
Jan 14, 2013
Having a serious problem with my PC type Dell Vostro 460Where the network card is not recognized from time to timeBut when I disconnect the power supply or when re-Rest Bios
Sometimes network card appearThe operating system I have Windows 8 Enterprise
View 5 Replies
View Related
Jan 14, 2012
Ive been using a d link network card for one of my desktops. It was working perfectly. But since my computer was starting to slow down I decided to format the harddrive and re install windows xp. Now the Network Card is not being recognized on the pc. Any idea how to make it work? I don't know where the Cd is and what model it is...
View 6 Replies
View Related
Oct 18, 2012
I'm trying to get a network of SGE2000 switches mapped into Cisco network assistant.It always comes back with the device type unknown and status unsupported device.Is there a way to fix this ? I'm using Cisco network assistant ver.5.7(6)
View 4 Replies
View Related
Jul 9, 2011
I have a new setup in my home due to the increase in devices needing internet access.I bought a 8 port netgear switch and have it connected to my router.My question is this, will the speed/performance of my internet be lower(via switch) compared to if I was just connected straight to the router,
View 2 Replies
View Related
Aug 8, 2012
LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies
View Related
Mar 29, 2013
I want to setup a simple VPN to allow users to access the office via the iOS (iPad/iPhone) devices. I assume I do this through:
VPN>IPsec>Basic VPN Setup
BUT, what do I enter for the "Endpoint Information" and "Secure Connection Remote Accessibility"?
View 1 Replies
View Related
Sep 1, 2011
I have a ACS 4.2 under windows, I setuped it to authenticate routers by RADIUS and TACACS+ protocols. now I have some devices whitch know only LDAP protocol. How can setup ACS as a ldap server to authenticate those devices?>
View 1 Replies
View Related
Mar 28, 2012
We have a Cisco 887 router and a Cisco SG-200 switch.We'd like to setup trunking between these 2 devices for multiple VLANs on the switch to be made available on the router.
With previous routers, you could set the router up in the configuration 'router-on-a-stick' and VLANs worked like a charm but the 887 no longer support sub-interfaces.So how can you get trunking working between the 2 devices?
Is there a VTP configuration menu for the SG-200 which we can setup in order for it to talk 'VTP' with the 887 router??
View 1 Replies
View Related
May 13, 2012
I setup several devices in the Parental Controls to be blocked always. These devices are still able to connect to the router. I tried rebooting the router but the problem persists. I have two laptops and two iPod Touches that can connect regardless of the access restrictions.
View 5 Replies
View Related
Dec 17, 2012
In a site-to-site vpn environment, can I accomplish the setup using one asa5505 on one end and one 1811 router on the other end or do I need to have two asa 5505 or two 1811 routers? Another word, can I mix and match the devices and still accomplish a site-to-site vpn setup or do I have to have the same devices on both end?
View 2 Replies
View Related
Jun 11, 2011
I wasn't sure where to post this as I'm not using cisco to do the network withwhat happens to a network when it goes over 255 devices that need IP address, how does the IP addressing then work?
View 8 Replies
View Related
Aug 26, 2011
My home network currently consists of the following components...
BT Homehub 3 router - B/G/N
PC running Windows 7 and using a Edimax wireless pci adaptor - B/G/N
XBox 360 with live connection - N
Laptop with inbuilt wifi and no slots for another card except via USB - G
Various phones - G
Everything in the house is running at ~ 26-54 Mb/s at the moment and the two N devices have a very weak signal due to their distance from the router. Unfortunately, moving the router to somewhere that will benefit one device will have a detrimental effect on the other due to their locations.The router has the option to switch on 40mhz (mbit???) which, I gather, is also known as channel bonding and this should boost the range and speed of the N service but I also gather that doing this will stop all the G devices from connecting at all.I still have the Homehub 2 router that I was using before so I was wondering if there is any way I could make use of this (or anything else) to allow me to use all devices in the house at their fastest speeds.
View 3 Replies
View Related
May 19, 2011
How to feel about having network devices resolve names? Do you typically do it? No? Why or why not?I feel like I haven't seen it set up a lot, but it could certainly be good for specifying logging hosts and things like that.
View 7 Replies
View Related
Jul 25, 2012
Can an IP conflict cause network issues for computers other than the devices that have the same IP? I have resolved an issue where someone was testing a device on our network and assigned a static IP that was already in use by one of our printers. Specifically, I am curious if the IP conflict could have caused issues with mapped network drives for other computers. I just seemed to have network gremlins for the 2 days of the IP conflict.
View 2 Replies
View Related
Mar 18, 2012
I've been having a bit of a problem lately trying to play Battlefield 3 on my PS3 when other computers are running on my network.
I'm looking for a program or method to set bandwidth limits on some devices to try to guarantee the PS3 enough bandwidth to play without lagging.
With the research I have done what I can find is that there is something called Quality of Service (QoS), and traffic shaping -- which are good and fine but I don't believe my Westell router supports them and I don't want to have to do anything crazy with my router.
Also I am currently dual booting Ubuntu Linux alongside Windows XP, and I don't have XP set up because I want to install Windows 7 on that partition once I can read DVDs (in the hardware forum), therefor I would really like to find a Linux program that I can use to shape my network traffic.
View 2 Replies
View Related
Sep 15, 2012
I have a mix of devices that all access the internet via a Deutches Telkom Speedport W 723v my windows devices, HTC phone and even the iPad 2 never have a problem, but my Macbook Pro (Unibody Late 2008 model) and my iMac (Probably 2007 / 2008) keep having a problem with the network dropping out. To fix it I have to switch off Airport and switch it back on again and it re-connects straight away.The Mac OSX software albeit now rather dated on both devices (The Macbook is 10.5.8) is kept up to date using Software Update.The problem amy also now be affecting my APPLE TV2 it never had a problem before but now I cannot connect to iTunes on my Macbook using Home Sharing it just does not want to connect!!!I did try before going into the Speedport and changing channels from AUTO to channel 1 but that did not resolve it. I am going to do it again and try a different channel but logging onto the Speedport is an absolute pain, I can only login using my Macbook Pro when it is booted into Windows XP and on Ethernet as we had all sorts of problems setting it up and could only do it using IE not SAFARI and now the Speedport login only recognises 1 x PC for logging in, if you try a different device it throws a wobbly and locks up!
View 7 Replies
View Related
Jul 31, 2011
After getting unusual IP conflicts on my laptop, I did a scan of my home network with a program called Zamzom and got the following results:On my Macbook I used a similar program and got more than 40 devices showing up: Neither program says which devices are active. The Mac results bring up BlackBerrys among other things. I upgraded my security from WEP to WPA2, but nothing changed. I use NOD32 and recently installed AdAware, which picked up a few things, but again, results are the same.
View 7 Replies
View Related
Dec 27, 2012
I have an ADSL connection through Canal Digitaal, which I believe uses the KPN network. My Zyxel 2601 modem/router is usually accessed at 192.168.1.254. The following devices are connected to it: two iphones, a Macbook Air, an Apple TV 3 and a Mac Pro.all devices except the Mac Pro. Looking closer I found in their respective settings that they connect to 192.168. 2.254. All have somehow been assigned IP addresses on the 192.168.2.xxx network. The Mac Pro remains on the 192.168.1.xxx network.Going to 192.168.2.254 launches a login page for a KPN router called Arcadyan ARV7519 which is on ANOTHER SSID than my wifi network. Nevertheless, all my devices say they are connected to my network SSID but with IP addresses in the 192.168.2.xxx range.Does it have to to with the channels used by the respective routers or is there some phishing or such going on? What can I do to ensure that my devices stay on my Zyxel network?Weirdly, the SSID of the Arcadyan router doesn't normally show up in my list of nearby networks. It only shows sometimes.Also - in case it is relevant - when I try to access 192.168.1.254 from my Mac Pro I am able to log in, meaning I reach the welcome page of my Zyxel router though it takes a very long time for it to load.
View 7 Replies
View Related
Oct 9, 2012
I have installed a video security system into my home/office and several IP cameras are connected via my wired cat5 network which connects to my router and switcher into a PC with internet access. This will allow me to record any break ins and alert me of this event and view it in real time.I would like to restrict access to these devices for anyone else on the network, with either dedicated access or password protection.
View 1 Replies
View Related
Jan 15, 2013
here's the network.
Panasonic TV (DLNA Device) - Ethernet
WDTV Live Plus (DLNA Device) - WLAN
Windows 8 PC - Ethernet
Windows 7 PC - WLAN
Samsung Galaxy S3 - WLAN
The WDTV can act as a media player for both the Windows 7 PC and Samsung Galaxy S3.The TV can act as a media player for the Windows 8 PC.If I connect the Windows 7 PC via Ethernet, then the TV sees it and can act as a media player for it and the WDTV no longer can.The TV can't act as a media player for the Samsung Galaxy S3 nor can they see each other to use the Galaxy S3 as a wireless remote (Viera remote android app) .Why can my wireless devices talk to each other and my wired devices talk to each other, but the wireless devices can't talk to the wired devices?
View 1 Replies
View Related
Jan 1, 2013
I've got several devices (two laptops, Xbox, WiiU, Apple TV, 2 ipads, and an iphone) that can connect to my home wifi network just fine. However, when connected it seems these devices cannot communicate with one another.
Homesharing between my iphone/laptop and Apple TV is no longer functioning. Also, I can not sync my windows media player with my Xbox, and I can not connect my iphone to the Xbox using AirMusic.
Here's my hardware: Motorola SB5101U SURFboard modem, Netgear Wireless N WNR2000 router.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[Code]......
View 3 Replies
View Related
Mar 20, 2011
I'm running Windows XP, SP3. This is a friends computer that I'm trying to fix. It had a virus which I removed, however it left behind a damaged computer. Now there are no network devices that show up in "Network Connections" or in Device Manager. I tried to reinstall the drivers, but I got this error: "The Realtek Ethernet Controller was not found. If Deep Sleep Mode is enabled Please Plug [sic] the Cable".
View 1 Replies
View Related
Oct 30, 2011
we currently have one desktop PC, two laptops, two HDTVs, and three cell phones. All of them are Wi-Fi compatible. Currently, I have a NetGear WGR614 v8 router courtesy of Comcast.it is possible that I can have all devices sharing the same Wi-Fi network? The desktop PC is connected to the router with CAT-5. The TV in the living room can be connected to the router as well with CAT-5 as the router is less than a foot from the network jack on the back of the TV.The TV in the bedroom has a Wi-Fi ready via USB.My daughter who is off to college owns one of the cell phones a laptop and an XBOX360 which I am not concerned about connecting until she returns home around Christmas.
View 1 Replies
View Related
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Jan 10, 2012
I've got a sky router at home with some devices connected wireless and some on cables. I want to be able to disable some devices at night so the kids cant go online with Xbox's and PC's at night.I dont want to just turn off the router as I want to go online at night.
View 1 Replies
View Related
Jul 12, 2012
i have a problem with my small office network. the issue is i have 2 public ip address that was configured in 2 (devices) dlink router and linksys cisco wireless router.
with individual static ip address:
1st router connected to dlink switch (smartweb) and 2nd wireless router is only for the admin user.
how can i able to share a files / printer with these 2 network device?
View 1 Replies
View Related
Sep 1, 2011
I have two computers, one vista (Laptop) the other XP (Desktop). Now the problem is that i can't see my vista laptop on my XP, but both are connected to the same router (Netgear DG2200). The router also has a hard drive connected as a network drive WHICH i can see on the XP.
Problem is, nothing comes up on the Vista laptop except for the router and itself. Not even the network hard drive. I can view it on my PS3, though.
I noticed my lan is not enabled on my laptop, so how do i enable it? I tried diagnosing but it said to connect the lan cable.
View 11 Replies
View Related
