We have CAM/CAS 4.8.2, NAC agent 4.8.2.3 and compliance module 3.4.27.1. AVG 2012 cannot be recognized by NAC agent. From the link below, it should work: [URL].
View 1 Replies
I have a micro-server at home running Server 2012 which is going to have a few virtual machines on hyper v.I also would like to use the server to watch films on which will be connected to by tv using a hdmi cable..I wanted to know is it ok to play films off server 2012 and watch them on the tv?
View 9 Replies View RelatedI have some unused 10G NIC's and want to see if there's a way to install them into a computer and turn that PC into a switch. I need to run Windows based software for driver support of the NIC's, such as Server 2012. This is a picture of what I am hoping to accomplish:
[PC1] -----10G------[PC2]------10G------< Hardware Switch >
| | | | |
1G 1G 1G 1G 1G
| | | | |
[PC3][PC4][PC5]......
As you can see in the simplified picture above, I have a real switch which has a single 10G link that is connected to PC2. I would like to add the 10G cards to PC2 so that I can create a "switch" of 10G ports on PC2 which I can then hook up other clients (such as PC1 in the above picture).
PC2 needs to provide network access and internet access to PC1 (and other PC's connected to PC2 - not pictured).
The rest of the clients on the network are connected to the regular gigabit ethernet ports of the hardware switch (including my router which is 192.168.1.1).
I looked into Windows Internet Sharing, but for that to work, I need to connect the router to PC2 above and for other considerations not described above, it is not physically possible for me to do that.
Is there software I can run on PC2 that will turn all the NIC ports of PC2 into a "switch"?
I just installed Server 2012 Standard on a trial. I would like to play around with Remote Desktop Services formerly called Terminal Services. I have no clue on where to start but I have installed the RDS roles.
View 7 Replies View RelatedI'm trying to connect my macbook air to a university Ethernet network. I'm using the apple thunderbolt to ethernet adaptor to connect, and it registers a connection in the network preferences, with an IP address and subnet mask number. However, it wont fill the router name, the DNS server number or the search domains fields.When I use google chrome to load a webpage it doesn't load, stating that a DNS lookup has failed.How do I get connected?
View 1 Replies View RelatedWe are using MS System Center Operations Manager to monitor network devices. We are trying to monitor our Cisco ASA 5525-X firewall interfaces.
We have a generic management pack installed that seems to work for parts of the 5525. We can see performance info for IF-4 but none of the other interfaces.
Our Management Pack is a generic Cisco Adaptive Security Appliance Version 9.1(1) management pack.
Is there a management pack that is specifically for this Cisco firewall?
I have an unusual issue, for which I can find nothing on the net similar.
Setup:
ASA5505 = > CISCO3524 => Windows 2012 server
ASA is internet edge with ACL / NAT implemented.
We are wanting to implement inbound NATs for this server - 3389. We have many other servers on the internal side of this ASA that we are NATing to. Creating NATs using the same outside IP to another server is fine, no issues. This other test server resides on the same VLAN as the windows 2012 server. All IPv6 is turned off on the W2012 server, and it can web-browse out via the ASA as well. No matter what I do, however I cannot get iinbound NAT, on ANY port to this server working. Internally from another server to this server on any port is fine, i.e. we can RDP to this server without issue, so we know this works - the firewall on this server is turned off too. This is our ONLY w2012 server on the internal side. When we run a wireshark on the server whilst testing the NAT there is no traffic, so its getting blocked somewhere.
The config of the ASA is fairly big to to santize it and remove all customer reference would take a while to make display of this secure difficult.
I have just purchased the latest 2012 27" iMac and I would like to know if the Belkin AV360 (F2CD007) works with this iMac as it has thunderbolt ports and not the previous mini display ports that older iMacs have? I have searched online and asked Apple directly but they referred me to Belkin. I have emailed Belkin and the reply was not useful.
View 1 Replies View RelatedI'm currently implementing Microsoft System Center 2012 Operations Manager, the curent stage of the project is to add the network devices to SCOM via SNMP in order to monitor them, I am able to add them all and monitor; however, my ASA 5510, although SCOM discovers the ASA via SNMP and adds it to the network monitoring list, it loses SNMP connectivy every 30 minutes, and 15 later it reconnect with SCOM, then after another 15 minutes it loses the connection again, and so on and so for.
View 1 Replies View RelatedCan we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies View RelatedI can't seem to figure out which one I should go for. I'm thinking Kaspersky would have greater security but I'm not familiar with AVG's server level security.I don't need all the bells and whistles such as file encryption or password storage. I'm simply after a really strong AV for the server. Another one is VIPRE although I've heard it can take a while to configure it unlike Kaspersky which is pretty straight forward.
View 1 Replies View RelatedWhen I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012 Hyper V Virtual Ethernet Adapter loses default gateway server 2012
View 9 Replies View Related1) I had Windows XP 2012 Security virus that I removed. The antivirus software also removed afs.sys and afs.reg file, that I repalced from backup. I also copied and merged afs.reg Doing this got me an ipaddress for my PC.
2) I can not connect my wired desktop to the Internet. I can ping the ip address of google.com but not the url. I can also not ping ip address of netgear.com. My laptop has no problem connecting to the wireless network.
3) I ran Winsockxpfix and flushed dns and no luck. [code]
This is a Dell PN YT674. I can't find a freaking Server 2012 driver for it anywhere.
View 3 Replies View Relatedi've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
The onboard NIC on my Asrock Extreme6 Z77 has stopped working. I had recently moved my system in to a newer and better home, and after moving it in to the new case the NIC stopped working. I had originally thought that I may have zapped it, but looking at the device manager I saw that it was enabled and recognized by Windows. So I tried some trouble shooting.
- Uninstall and re-install drivers.
- Different cables (5 in total, 3 of which work on other machines)
- Disable and re-enable.
- Went out and bought a wireless USB, allowed me to connect to the internet this way.Then yesterday it started to work again after not using the computer for most of the day.Could play some Battlefield 3, and about 2 hours in to gameplay it stopped working.Ran trouble shoot on Windows, something quickly popped up saying something about ip wasn't reconfigured/updated/some BS like that.Finished for the night happy it was working again and then came back on tonight and now it's not working again.
- Updated BIOS.
- Deleted McAfee
- Verified it was turned on in UEFI (doesn't show connected in system browser in UEFI)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Crosby-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
I just installed a fresh copy of Windows XP Pro SP3 on one computer. Now my other PC has Windows7. I connected the two with a LAN cable, and in 'Network' the Windows 7 PC picks up the shared folder of the XP PC automatically, but the XP PC does not show the Windows 7 Shared(Public) folder. Can it be the Antivirus? XP PC has MS Security Essentials and Windows 7 PC has ESET.
View 1 Replies View RelatedI'm running on LMS 3.2 and RME 4.3.0 and one type of device was not recognized.this is NME-X-23ES-1G (IOS : 12.2(35)SE5) in a 3825 url... this module is supported with the OID 1.3.6.1.4.1.9.1.703,but in the device center I've found something which seems to be the right equipement :
- Cisco Interfaces and modules
- Cisco Network Modules
- Cisco 2800,3800 series 23-port EtherSwith Service module with OID 1.3.6.1.4.1.9.1.664
I have Prime 4.1 on windows with the latest update, it is up and running except for few devices ASR903 routers that are not being recognized in the Fault (DFM). These devices are supported in this release, The fault is showing that the devices are stuck at 10% learning state. The strange issue is that when i click on the routers that are in the learning state some shows in the device type as N/A ans others are showing "routers". Anyway i followed the steps mentioned in "How can I troubleshoot device discovery stuck at 10%"
View 1 Replies View RelatedI have a 2921 router, with UCK9 services on it. I've installed a VWIC2-2MFT but the system is not seeing it. I've been told there is a command required to enable the card, is this true? I've always done most of my UC work on the 2800 range and never had to run an enable command, it just saw the card.
View 5 Replies View RelatedI noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
Yesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.
I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband. A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.it works with a Zoom router, but not the Netgear.
View 3 Replies View RelatedAn older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.
View 4 Replies View RelatedWe had a little family get together at my house which involved 2 smart phones and an iphone-(people were browsing using our unsecured router) and now the wireless router is not recognized by our pc's; it's like the wireless address just disappeared.
View 1 Replies View RelatedI have four 2811 routers with IOS 12.4(15)T installed. Embedded Event Manager was introduced in IOS 12.3(4)T, why do I not have it?! I've been at this for over a month, when I try to see the command 'event manager' I get Unrecognized command? According to all EEM documentation I can find, this should work on our machines!
View 4 Replies View RelatedI am trying to install VWIC2-1MFT-T1/E1 into c2600 router w IOS C2600 Software (C2600-I-M), Version 12.3(26) with 28672K/4096K bytes of memory It is not recognized? Do I need another version of IOS?
View 2 Replies View RelatedWe just replaced a floor swithc, and ended up going with an IOS-XE software, LMS does not seem to like this software, the device is not available in my Identity dashboard, it's abviously running dot1x.
LMS shows it as software version 03.02.01.SG, same as you get when you do a show version, license level is enterprise services.
Actual Image name: cat4500e-universalk9.SPA.03.02.01.SG.150-2.SG1.bin
Also, the IOS upgrade option does not work for this device, it give an error saying to perform an inventory collection, which I have manually performed, the device is reachable and manageable by LMS, and it does not show up in any of the IOS version reports.
After connecting ZTE636 USB modem to Cisco RV215W the modem is not recognized, even though it is on the compatible modems list. The stick is from Orange PL. Firmware upgraded to 1.1.0.5.
View 1 Replies View RelatedI just got this av to cat5 converter [URL]? and was thinking i could use a router on each end so it could be wireless. But the way they work the router does not see the converter when it is plugged in.
View 9 Replies View RelatedI have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.
View 1 Replies View RelatedI have a computer that runs windows 7, and I run an ethernet cable from netgear router into my computer. It used to run fine, but all of a sudden it stopped recognizing the ethernet cable, and I can not access internet.
I know it is not the cable because I can plug in the same ethernet cable to my laptop (runs XP) and it recognizes and I can access internet.
Also, I know it's not the slot on the router because because I switched places with my other ethernet cable that plugs into Netgear Powerline Ethernet Adapter for my Xbox, and the slot recognizes the adapter just fine.
So I am thinking it has to do something with Win 7 or the computer. My computer does have the wireless capability, and I am running it on wireless right now.
I have never had to do anything to connect to my fathers netgear router or my own netgear router. I would just turn on my pc and have internet. After my brother touched my computer it no longer recognizes any wireless connection. My internet provider says that I need a new router. I don't think that is the problem because after my brother played with my computer it was unable to see any connections (not even neighbors which I normally see). This makes me think something is wrong with my computer not the router.
PS. I do have my wireless switch turned to on. My brother doesn't know what he did but will not be allowed to play with it again.
