Cisco :: ASR903 Prime 4.1 Not Being Recognized
Jun 10, 2013
I have Prime 4.1 on windows with the latest update, it is up and running except for few devices ASR903 routers that are not being recognized in the Fault (DFM). These devices are supported in this release, The fault is showing that the devices are stuck at 10% learning state. The strange issue is that when i click on the routers that are in the learning state some shows in the device type as N/A ans others are showing "routers". Anyway i followed the steps mentioned in "How can I troubleshoot device discovery stuck at 10%"
View 1 Replies
ADVERTISEMENT
Dec 18, 2012
Is there a way to mark BFD control packets in Cisco routers (such as ASR903) with high priority, so it gets treated with priority in swithcing network between two routers, in turn not suffers from packet loss and delay ?
View 3 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
Feb 17, 2013
The onboard NIC on my Asrock Extreme6 Z77 has stopped working. I had recently moved my system in to a newer and better home, and after moving it in to the new case the NIC stopped working. I had originally thought that I may have zapped it, but looking at the device manager I saw that it was enabled and recognized by Windows. So I tried some trouble shooting.
- Uninstall and re-install drivers.
- Different cables (5 in total, 3 of which work on other machines)
- Disable and re-enable.
- Went out and bought a wireless USB, allowed me to connect to the internet this way.Then yesterday it started to work again after not using the computer for most of the day.Could play some Battlefield 3, and about 2 hours in to gameplay it stopped working.Ran trouble shoot on Windows, something quickly popped up saying something about ip wasn't reconfigured/updated/some BS like that.Finished for the night happy it was working again and then came back on tonight and now it's not working again.
- Updated BIOS.
- Deleted McAfee
- Verified it was turned on in UEFI (doesn't show connected in system browser in UEFI)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Crosby-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
View 4 Replies
View Related
Oct 26, 2011
I just installed a fresh copy of Windows XP Pro SP3 on one computer. Now my other PC has Windows7. I connected the two with a LAN cable, and in 'Network' the Windows 7 PC picks up the shared folder of the XP PC automatically, but the XP PC does not show the Windows 7 Shared(Public) folder. Can it be the Antivirus? XP PC has MS Security Essentials and Windows 7 PC has ESET.
View 1 Replies
View Related
Jul 4, 2011
I'm running on LMS 3.2 and RME 4.3.0 and one type of device was not recognized.this is NME-X-23ES-1G (IOS : 12.2(35)SE5) in a 3825 url... this module is supported with the OID 1.3.6.1.4.1.9.1.703,but in the device center I've found something which seems to be the right equipement :
- Cisco Interfaces and modules
- Cisco Network Modules
- Cisco 2800,3800 series 23-port EtherSwith Service module with OID 1.3.6.1.4.1.9.1.664
View 1 Replies
View Related
Apr 3, 2012
I have a 2921 router, with UCK9 services on it. I've installed a VWIC2-2MFT but the system is not seeing it. I've been told there is a command required to enable the card, is this true? I've always done most of my UC work on the 2800 range and never had to run an enable command, it just saw the card.
View 5 Replies
View Related
Jan 24, 2012
I noticed in RME inventory, my ASR1001 hardware is not recognized. I checked my Ciscoworks and it only knows ASR1002, 1004, and 1006 routers.
I checked the supported device table for LMS 3.2 and did not find ASR1001. Is there a separate device package I can download. This is not a deal breaker, but it's unnerving to see the question mark icon next to the name of my router in the Cisco works GUI.
View 1 Replies
View Related
Jan 4, 2012
We have CAM/CAS 4.8.2, NAC agent 4.8.2.3 and compliance module 3.4.27.1. AVG 2012 cannot be recognized by NAC agent. From the link below, it should work: [URL].
View 1 Replies
View Related
Sep 20, 2012
Yesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.
I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.
View 14 Replies
View Related
Mar 20, 2011
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband. A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.it works with a Zoom router, but not the Netgear.
View 3 Replies
View Related
Apr 25, 2013
An older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.
View 4 Replies
View Related
Apr 9, 2012
We had a little family get together at my house which involved 2 smart phones and an iphone-(people were browsing using our unsecured router) and now the wireless router is not recognized by our pc's; it's like the wireless address just disappeared.
View 1 Replies
View Related
Oct 23, 2011
I have four 2811 routers with IOS 12.4(15)T installed. Embedded Event Manager was introduced in IOS 12.3(4)T, why do I not have it?! I've been at this for over a month, when I try to see the command 'event manager' I get Unrecognized command? According to all EEM documentation I can find, this should work on our machines!
View 4 Replies
View Related
Jul 4, 2011
I am trying to install VWIC2-1MFT-T1/E1 into c2600 router w IOS C2600 Software (C2600-I-M), Version 12.3(26) with 28672K/4096K bytes of memory It is not recognized? Do I need another version of IOS?
View 2 Replies
View Related
Oct 2, 2011
We just replaced a floor swithc, and ended up going with an IOS-XE software, LMS does not seem to like this software, the device is not available in my Identity dashboard, it's abviously running dot1x.
LMS shows it as software version 03.02.01.SG, same as you get when you do a show version, license level is enterprise services.
Actual Image name: cat4500e-universalk9.SPA.03.02.01.SG.150-2.SG1.bin
Also, the IOS upgrade option does not work for this device, it give an error saying to perform an inventory collection, which I have manually performed, the device is reachable and manageable by LMS, and it does not show up in any of the IOS version reports.
View 1 Replies
View Related
May 7, 2013
After connecting ZTE636 USB modem to Cisco RV215W the modem is not recognized, even though it is on the compatible modems list. The stick is from Orange PL. Firmware upgraded to 1.1.0.5.
View 1 Replies
View Related
Aug 3, 2011
I just got this av to cat5 converter [URL]? and was thinking i could use a router on each end so it could be wireless. But the way they work the router does not see the converter when it is plugged in.
View 9 Replies
View Related
Sep 15, 2011
I have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.
View 1 Replies
View Related
May 12, 2011
I have a computer that runs windows 7, and I run an ethernet cable from netgear router into my computer. It used to run fine, but all of a sudden it stopped recognizing the ethernet cable, and I can not access internet.
I know it is not the cable because I can plug in the same ethernet cable to my laptop (runs XP) and it recognizes and I can access internet.
Also, I know it's not the slot on the router because because I switched places with my other ethernet cable that plugs into Netgear Powerline Ethernet Adapter for my Xbox, and the slot recognizes the adapter just fine.
So I am thinking it has to do something with Win 7 or the computer. My computer does have the wireless capability, and I am running it on wireless right now.
View 14 Replies
View Related
Dec 8, 2011
I have never had to do anything to connect to my fathers netgear router or my own netgear router. I would just turn on my pc and have internet. After my brother touched my computer it no longer recognizes any wireless connection. My internet provider says that I need a new router. I don't think that is the problem because after my brother played with my computer it was unable to see any connections (not even neighbors which I normally see). This makes me think something is wrong with my computer not the router.
PS. I do have my wireless switch turned to on. My brother doesn't know what he did but will not be allowed to play with it again.
View 10 Replies
View Related
Oct 8, 2012
I have tried 3 cables and all three are not recognized even though they are plugged in. I have uninstalled network adapter and re installed it and i have updated the driver still nothing so i don't know what to do next.my laptop is a hp pavilion g6 series
View 10 Replies
View Related
Aug 4, 2012
I am trying to setup a hard drive through my network to be recognized on all my devices.Here is what I have:
router: Belkin n300 max share F7D7301
modem: RCA cable modem
Internet provider: Teksavvy (through a Rogers line)
Hard drive: WD Elements 2TB HD (formatted NTFS)
Antivirus: AVG Free
ps3
laptop (running xp)
galaxy s3
The ps3 is wired into the router, the laptop and s3 are wireless. I have connected my hard drive to one of the USB drives on the router. I can see the HD and view any of its content (movies and music) on the laptop, but nothing else. My ps3 and s3 are connected to the internet, however I can't find the drive.
View 3 Replies
View Related
Mar 20, 2011
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband.
A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.
Funny thing is that it works with a Zoom router, but not the Netgear There must be settings on the Netgear that needs changing
View 9 Replies
View Related
Nov 18, 2012
password is not recognized bythe Linksys router
View 2 Replies
View Related
Dec 1, 2011
Ever since moving back in with my dad, I haven't been able to connect directly to the modem. I can connect to the wireless network, but whenever I try and plug straight into the modem, nothing changes and I stay on the wireless. I'm running Windows 7?
My computer specs are as follows (directly from the TSG SysInfo application):
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3766 Mb
Graphics Card: Intel(R) HD Graphics, 1755 Mb
Hard Drives: C: Total - 476837 MB, Free - 162910 MB;
Motherboard: Acer, Aspire 5742G
Antivirus: avast! Antivirus, Updated and Enabled
View 4 Replies
View Related
Dec 10, 2010
i have a Setup as Follows
- 5508/1142
- heterogenous Client with WZC, XP, SP3, SSO
- ACS 5.2, MS AD
Target is Songle Sign On wih Machine Cerificates against AD. For testing purpose we tested with EAP-PEAP/MS Chapv2 and Machine Auth, works fine. Now we installed a Machine cert in the Machine cert Store (no User Cert) and reconfigured the WZC for using certs and Machin Auth. What we see is an Error Message in the System Tray that there is no certificate available. We checked it again, the MMC shows us a Machine cert in the Store.
View 4 Replies
View Related
Oct 18, 2012
I'm trying to get a network of SGE2000 switches mapped into Cisco network assistant.It always comes back with the device type unknown and status unsupported device.Is there a way to fix this ? I'm using Cisco network assistant ver.5.7(6)
View 4 Replies
View Related
Jul 1, 2012
in the past my laptop has been able to connect directly to the internet using an Cat5e cable, but recently when I have been trying to direct connect, I have been unable to, and not sure when the problem started because I always used WiFi and it worked great. I do a lot of messing around, not only with my network, but with my laptop settings also, so something might have gone bunko. I have done much troubleshooitng, such as trying to update drivers, checking to see if the hardware was disabled, etc...
View 1 Replies
View Related
Sep 15, 2011
This will be rather difficult as i'm on a cell phone. Anyways i'm unable to get my computer to recognize that an ethernet cable is connected. I know that the cable is good is i've used it with my girlfriends computer with on problems. I've blowed out the port, used two different cords. Apart from connecting to the internet (which i can't atm) i have no idea what to do.
View 12 Replies
View Related
Jun 29, 2011
I can hear nothing sound driver disabled... windows explorer wont open...and my notepad and calculator wont work either... how do i remove it..
View 1 Replies
View Related
Mar 28, 2012
My wireless has just gone it is not recognized in the device manager and a USB Device not Recognized pop up is showing up.i restart it a couple of times and once it did showed up but after i did it again it was gone again.i have a Toshiba laptop l300
View 3 Replies
View Related
