Cisco :: LMS 4.0.1 / SWIM0036 - Could Not Add This Image To Software Repository
Jun 8, 2011I have a problem with LMS s/w backup procedure. It outputs the following error: SWIM0036: Could not add this image to software repository.
View 8 Replies
ADVERTISEMENT
Cisco :: Unable To Get 6509 IOS Via Add To Repository Job
May 16, 2012This is a new install of LMS 4.2 evaluation. I have a current install of LMS 3.2 which is working. When I run an Add job for our core 6509 in Software Repository using cisco.com on the 3.2 LMS it works normally. When I attempt the same job in LMS 4.2 for the same device the device is not selectable in the left hand window and it has a message that says (This operation requires Containment data in Inventory. Either this is unavailable) Or (Add Image from CCO not supported). Also and probably related is that LMS 4.2 cannot complete an inventory update on the 6509s that we have and does not say why the inventory job collection failed. So far as I can tell the other devices inventory and offer IOS updates correctly. I ran a job to get all device package updates before I ran any of the jobs. The devices all pass credential checks except for HTTP, which is not activated on the devices.
View 4 Replies View RelatedCisco :: LMS 4.2 Possibility To MD5 Checksum All IOS Images In Repository?
Oct 8, 2012Recently we upgraded a switch with an image from the repository in LMS. After the installation of the image it seemed corrupt.
My question now is : Can we do a MD5 checksum on all the images in the local repository to verify that all images are ok to use?
Cisco AAA/Identity/Nac :: ACS 1152 Losing Repository Info
Aug 14, 2011I have two ACS1152 appliances running as a redundant pair. I notices that secondary box keeps losing its repository information in the config.
View 2 Replies View RelatedCisco :: LMS 4.0 Device Credential And Repository Showing As Empty?
Jan 16, 2012I have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.
View 5 Replies View RelatedCisco :: LMS 4.1 New Install Win2008 - Swim Repository Directory Missing
Feb 15, 2012I have just installed LMS 4.1 on a Win2008serverR2. Getting started and discovery are OK. Then I tried to configure all parameters under the Admin Menu. I have a problem with SWIM : the "repository" directory does not exist ! I also tried to import an IOS file into the repository : no way.
View 3 Replies View RelatedCisco Firewall :: ASA5510 Device Manager Image Set But Not A Valid Image File
Feb 9, 2012I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedCisco Switching/Routing :: Stacking 3750-X With Universal Image With 3750-G Running BIN Image?
Oct 10, 2011I'm looking at adding a Cisco 3750-X switch running c3750e-universalk9-mz.122-55.SE1 (IP base license) into a stack of 3750-G switches running c3750-ipbasek9-mz.122-55.SE1.bin Given that the version and feature sets are the same I don't forsee any compatibility issues. Would there be any reason why a universal image wouldn't stack correctly with other switches running the single .bin file?
View 9 Replies View RelatedCisco :: IDS Image For GNS3?
Jan 7, 2013Have anybody direct link to download IDS image for GNS3 ?
View 1 Replies View RelatedCisco WAN :: IOS Image Download 2811?
Sep 4, 2011I want the below mentioned IOS image for backup purpose. But I am not finding it in cisco.com or anywhere in the in internet. where can I get this version of image other than my router.
c2800nm-advsecurityk9-mz.124-3d.bin
Cisco VPN :: ASA 5510 - Can't Install CSD Image
Jun 12, 2013I'm facing the problem that I can't install an CSD Image on the asa. Got the error:
[OK] webvpn
webvpn
[ERROR] csd image disk0:/csd_3.6.181-k9.pkg
The disk is (or was) full during extraction.
ASA 5510 has 256MB RAM, 1024MB Flash, ASA Version 8.2(5)41, ASDM 7.1(3)
IOS Image For GNS3 / Dynamips?
Apr 30, 2012I get an IOS image for GNS3? I dont work in a company that would do that for me
View 4 Replies View RelatedCisco :: 3725 IOS Image That Supports The Ip Sla Command?
Oct 19, 2012any 3725 IOS image that supports the ip sla command? I tried searching for it using the feature navigator but i received something like "15T" and I'm not too sure what that is.
View 4 Replies View RelatedCisco :: How To Tell If My 2960 Has Lan Base Or Lite Image
Apr 2, 2012How do I tell if my cisco 2960 has the Lan Base or Lan Lite image?
View 11 Replies View RelatedCisco Wireless :: Not Able To Download Image From WLC 5508 V7.2
May 8, 2012I successfully converted an old 1231G to CAPWAPP. However, when I try to join it to a WLC5508 I receive the floowing errors. [code]
View 2 Replies View RelatedCisco WAN :: C2960 Boot Image After Ios Upgrade
Dec 30, 2011 i upgrade the IOS for switch c2960 and the swtich do not boot from the new image.
-show version
-show boot
-show flash
Cisco WAN :: Router 2610XM Self Decompressing Image?
Feb 18, 2011I`m having problem with booting Cisco router 2610 and I`m having this message :
C2600 platform with 131072 Kbytes of main memory
Program load complete, entry point: 0x80008000, size 0x439138
Self decompressing the image :####################################################################################################################################################################[OK]
After that, I can't type any thing?
Cisco Firewall :: ASA5510 Will Not Load New Image
Aug 4, 2011i have an ASA 5510. it was running asa708-k8.bin and i have attempted to install asa821-k8.bin. i have done this on many ASAs before effortlessly.this time i have had an issue. the ASA will not load the new image, and for some reason will not even load the old.the ASA seems to just keep crashing. i have erased disk0 (advised in forum): and attempted to load the image from tftp. please see below. i know i need to re-formaet the flash, but cannot get into the ASA at all to complete this. [code]
View 2 Replies View RelatedCisco Firewall :: PIX 501 Upgrade To Have ASDM Image On It
Mar 29, 2011I got a PIX 501 off ebay and im trying to upgrade it to have an ASDM image on it.Ive downloaded every copy of the ASDM image i can get my hands on, and when i transfer it to the PIX when its up and running i get out of memory, If i do it through monitor mode, i get the error "bad magic number" no matter what i transfer to itI can transfer a new image to the PIX (a non asdm one through monitor mode.
View 3 Replies View RelatedCisco :: Remote Access LMS 4.2 Installed Over Image
Dec 26, 2012i installed Prime LMS 4.2 on Vmware ESXİ 5.0 and then in console screen i create hostname,IP,DNS etc correctly.Then, in LMS 4.2 console screen and another client Win7 PC can ping each other however i cant reach LMS 4.2 via web browser remote client PC.
View 3 Replies View RelatedCisco :: Upgrading 1261n To Lightweight Image?
Mar 28, 2011I am attempting to upgrade my 1261n's to lightweight but the upgrade tool (3.4) is telling me that it is not compatible with this model AP. Is there an article or quick run down on what I need to do to upgrade these AP's?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Re-image NAC-3315 Appliance To ISE
Mar 29, 2012My site got the NAC-3315 appliance and we would like to reimage this appliance to inline posture mode (for VPN purpose)What's the proper migration process should deal with this? Is the NAC-3315 hardware comply with the Inline posture mode requirement?
View 4 Replies View RelatedCisco Firewall :: Need Image File Install On Pix 515
Aug 28, 2011I have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.
View 1 Replies View RelatedCisco Wireless :: Copying A New IOS Image Into AP801
Oct 22, 2012I struggle with how to install an IOS into an AP. And I am still not very clear on how this is to be accomplished. I have an 881W and have downloaded what I believe to be the latest IOS for this AP (ap801-k9w7-tar.152-2.JA). Problem is that I have not really found a good or at least clear set of instructions in how to load this IOS into my AP, so I have not done that yet.Does the IOS that is currently installed into the AP remain after an update or does the new IOS overwrite the current IOS. And how does one recover from a, heaven forbid, faulty installation. What is the fallback from that. How I can update my AP. Because, right now, I am most certainly hesitant to even attempt an upgrade.
View 4 Replies View RelatedCisco WAN :: Change 881 Image From Data To CUBE
Nov 12, 2011My customer has purchased the standard Cisco 881 (Data) ISR router and now requires (Voice) CUBE services for the support of IP-IP gateway SIP services. I noticed there is multiple models for the Cisco 881 such as the SEC/3G & SRST. Any way to change the Universal image from Data to Voice to support CUBE if possible. Just want to try and eliminate purchasing new Cisco 881 with Universal image for Voice.
View 4 Replies View RelatedCisco Wireless :: Upgrade IOS Image For 1260 AP?
Nov 3, 2012i have cisco 1260 Access point with standalone ios ap3g1-k9w7-tar.124-23c. i download new IOS to connect the AP to the controller the new ios is ap3g1-k9w8-tar.124-23c.JA5.tar. upgrade th AP to LAP. is it just install ios like in router & switch by tftp?
View 1 Replies View RelatedCisco Wireless :: TFTP Image To WLC 2504?
Nov 29, 2012I am trying to TFTP an image to a Cisco 2504 WLC. The management interface is 10.1.1.1 /24 and I have my PC connected to a port on the WLC with the IP address 10.1.1.10. However, I still do not have connectivity between the PC and WLC.
View 3 Replies View RelatedCisco WAN :: 2921 - Minimum Requirements For IOS Image?
Jul 5, 2011Got a question regarding 2921 modules. Can I use VWIC2-2MFT-T1/E1 along with NM-HDV2-2T1/E1 on 2921 and what is the minimum requirements for IOS image?
As I understand, NM-HDV2-2T1/E1 is supported on 2921, however VWIC2-2MFT-T1/E1 is not, VWIC-2MFT-T1/E1 only. But VWIC-2MFT-T1/E1 is not supported on 2921.
Cisco WAN :: 2811 - IOS Image Doesn't Loading
Aug 23, 2011I've a problem with a router 2811:
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
[Code]......
Cisco Wireless :: Flash Image For Air BR1310G-A
Dec 22, 2012I purchased a used AIR BR1310G-A--K9-R from a local high school that was rebuilding their athletic field. The AP was used for communications for their pressbox staff. The AIR BR1310G was part of the schools campus wide WiFi network and was upgraded to an lwapp image c1310-k9w8-m 12.4 3c JA. Our home sits on a large lot and I would like to convert the BR1310G back to an autonomous AP.
In order convert it back to an automonous AP, I will need the original image. The school used a contractor for their WiFi network and they do not have a backup of the original image. I do not have a service account with Cisco so downloading the autonomous image from the Cisco website is out. What are my options for either obtaining an image file or using the current managed image without a WLC?
Cisco WAN :: Upload IOS Image Of 36mb On 2801?
Feb 27, 2012I wanna upload ios image of 36mb on a 2801 but I get error not available space. The router already has ios image of 40mb and available space is around 15mb. How to delete existing image and upload the new image?
View 7 Replies View RelatedCisco Wireless :: Pulling Image From 1130AG?
Feb 13, 2013I have a couple 1130AG switches. I'm trying to pull an image file from the flash on a Cisco Air AP1131AG. The file is c1130-k9w8-mx.124-23c.JA4.tar. The issue that I'm seeing is, I do not see a copy command to go through the tftp process. I've tried to use tftpd32 and enter the IP of the AP as the remote host, but that is not working either. Do I need to connect an ethernet cable straight to the AP in order to use Tftpd32, or can I use a console cable?
View 9 Replies View RelatedCisco Security :: PIX 501 Flash Image Download
Jun 23, 2011I have a PIX 501 and I am looking to download an OS as my current image is corrupt and the PIX will not boot. Where I can download the O/S from so I can tftp it across to the router.
View 1 Replies View Related
