My customer has purchased the standard Cisco 881 (Data) ISR router and now requires (Voice) CUBE services for the support of IP-IP gateway SIP services. I noticed there is multiple models for the Cisco 881 such as the SEC/3G & SRST. Any way to change the Universal image from Data to Voice to support CUBE if possible. Just want to try and eliminate purchasing new Cisco 881 with Universal image for Voice.
View 4 Replieslast month I bought in our China office a 2811c router.I asked (to a Chinese informatic company) a router to create a IPSEC - site to site VPN connection with an ASA.I'm not in China, and when they told me that router was power on, I tried to configure VPN.It was a bomb when I found that the image installed was "c2800nmc-spservicesk9-mz.150-1.M7.bin" not enough for my VPN, we need for example "c2800nmc-advipservicesk9-mz.150-1.M7.bin".Is it possible that in China this image is forbidden for VPN political restriction? - If I can, what's the Cisco procedure to change ios image? I must to buy an advanced license or I only register and download which image I need?
View 5 Replies View RelatedI am wondering how to change which image is loaded by default on an ASA5510. I have two image files stored in the flash memory on disk0:/ but need to change which one is loaded on boot. I used the command "boot system disk0:/asa722-12-k8.bin" which completed successfully, but when the system starts it says two images exist and the default is 1, loading the previous file. Is there a command to change the order that is used?
View 2 Replies View RelatedEnd user have had problem with IP phones that are connected to 3750 stack; many times IP phones lose connection with CallManager and the only way to clear this issue is with clear arp command. DHCP for IP phones is configured in 3750 stack.
At the beginning 3750 stack was set a VTP server, and the others as VTP clients, we detected another VTP server switch so we thought that was the problem, but after removing the issue remains. Finally we set all switch in transparent mode.
Base on this we decided to change the software image 12.2(35)SE1 C3750-ADVIPSERVICESK ---> 122-53.SE2 IPSERVICES I'm going to follow the procedure 3750 Series Switch Stack IOS Upgrade − Automatic .
as it show in the following information there are 4 differents models of 3750 switches, I have already download c3750-ipservicesk9-tar.122-53.SE2.tar for 3750G-24TS.
I have two doubts:
1. There is no problem for using this tar file for all models?
2. I followig command is correct for the change I plann to do ?
Switch#archive download-sw /allow-feature-upgrade /overwrite tftp://192.168.0.24/c3750-ipservicesk9-tar.122-53.SE2.tar
#sh inventoryNAME: "1", DESCR: "WS-C3750G-24TS" 16MB Flash 128 DRAMPID: WS-C3750G-24TS-E
[Code].....
we're trying to integrate our SBC instances (CUBE SP on ASR1000) into our network management system (EMC SMARTS)Syslog messages from SBC instances are some kind of cumbersome with lot of line breaks resulting in multiple syslog messages the NMS must parse.How do I configure it to just put it all into one line just as "normal" log messages?
View 2 Replies View Relatedwhen I was using image 1.0.0.27, I was able to move the management VLAN from 1 to which ever VLAN I wanted. For some reason, after switching the image to 1.1.1.8, I no longer have that function.
View 1 Replies View RelatedIf customer buys without cube license, I assume I have to purchase and actually apply the license. Is that correct?
View 2 Replies View RelatedWe will be moving to a new data center in the very near future and with them our WAN IP addresses will be changing. Any best course of action for changing the IP addresses throughout the firewall configuration? Would it be possible/suggested to export the running-config, make the neccessary changes, then import the config? I am familiar with the ASA 5510 only so far as changes are required. It is not something I work with on a regular basis.
View 5 Replies View RelatedI'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedI'm looking at adding a Cisco 3750-X switch running c3750e-universalk9-mz.122-55.SE1 (IP base license) into a stack of 3750-G switches running c3750-ipbasek9-mz.122-55.SE1.bin Given that the version and feature sets are the same I don't forsee any compatibility issues. Would there be any reason why a universal image wouldn't stack correctly with other switches running the single .bin file?
View 9 Replies View RelatedHave anybody direct link to download IDS image for GNS3 ?
View 1 Replies View RelatedI want the below mentioned IOS image for backup purpose. But I am not finding it in cisco.com or anywhere in the in internet. where can I get this version of image other than my router.
c2800nm-advsecurityk9-mz.124-3d.bin
I'm facing the problem that I can't install an CSD Image on the asa. Got the error:
[OK] webvpn
webvpn
[ERROR] csd image disk0:/csd_3.6.181-k9.pkg
The disk is (or was) full during extraction.
ASA 5510 has 256MB RAM, 1024MB Flash, ASA Version 8.2(5)41, ASDM 7.1(3)
I get an IOS image for GNS3? I dont work in a company that would do that for me
View 4 Replies View Relatedany 3725 IOS image that supports the ip sla command? I tried searching for it using the feature navigator but i received something like "15T" and I'm not too sure what that is.
View 4 Replies View RelatedHow do I tell if my cisco 2960 has the Lan Base or Lan Lite image?
View 11 Replies View RelatedI successfully converted an old 1231G to CAPWAPP. However, when I try to join it to a WLC5508 I receive the floowing errors. [code]
View 2 Replies View Related i upgrade the IOS for switch c2960 and the swtich do not boot from the new image.
-show version
-show boot
-show flash
I`m having problem with booting Cisco router 2610 and I`m having this message :
C2600 platform with 131072 Kbytes of main memory
Program load complete, entry point: 0x80008000, size 0x439138
Self decompressing the image :####################################################################################################################################################################[OK]
After that, I can't type any thing?
i have an ASA 5510. it was running asa708-k8.bin and i have attempted to install asa821-k8.bin. i have done this on many ASAs before effortlessly.this time i have had an issue. the ASA will not load the new image, and for some reason will not even load the old.the ASA seems to just keep crashing. i have erased disk0 (advised in forum): and attempted to load the image from tftp. please see below. i know i need to re-formaet the flash, but cannot get into the ASA at all to complete this. [code]
View 2 Replies View RelatedI got a PIX 501 off ebay and im trying to upgrade it to have an ASDM image on it.Ive downloaded every copy of the ASDM image i can get my hands on, and when i transfer it to the PIX when its up and running i get out of memory, If i do it through monitor mode, i get the error "bad magic number" no matter what i transfer to itI can transfer a new image to the PIX (a non asdm one through monitor mode.
View 3 Replies View Relatedi installed Prime LMS 4.2 on Vmware ESXİ 5.0 and then in console screen i create hostname,IP,DNS etc correctly.Then, in LMS 4.2 console screen and another client Win7 PC can ping each other however i cant reach LMS 4.2 via web browser remote client PC.
View 3 Replies View RelatedI am attempting to upgrade my 1261n's to lightweight but the upgrade tool (3.4) is telling me that it is not compatible with this model AP. Is there an article or quick run down on what I need to do to upgrade these AP's?
View 2 Replies View RelatedMy site got the NAC-3315 appliance and we would like to reimage this appliance to inline posture mode (for VPN purpose)What's the proper migration process should deal with this? Is the NAC-3315 hardware comply with the Inline posture mode requirement?
View 4 Replies View RelatedI have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.
View 1 Replies View RelatedI struggle with how to install an IOS into an AP. And I am still not very clear on how this is to be accomplished. I have an 881W and have downloaded what I believe to be the latest IOS for this AP (ap801-k9w7-tar.152-2.JA). Problem is that I have not really found a good or at least clear set of instructions in how to load this IOS into my AP, so I have not done that yet.Does the IOS that is currently installed into the AP remain after an update or does the new IOS overwrite the current IOS. And how does one recover from a, heaven forbid, faulty installation. What is the fallback from that. How I can update my AP. Because, right now, I am most certainly hesitant to even attempt an upgrade.
View 4 Replies View RelatedI have a problem with LMS s/w backup procedure. It outputs the following error: SWIM0036: Could not add this image to software repository.
View 8 Replies View Relatedi have cisco 1260 Access point with standalone ios ap3g1-k9w7-tar.124-23c. i download new IOS to connect the AP to the controller the new ios is ap3g1-k9w8-tar.124-23c.JA5.tar. upgrade th AP to LAP. is it just install ios like in router & switch by tftp?
View 1 Replies View RelatedI am trying to TFTP an image to a Cisco 2504 WLC. The management interface is 10.1.1.1 /24 and I have my PC connected to a port on the WLC with the IP address 10.1.1.10. However, I still do not have connectivity between the PC and WLC.
View 3 Replies View RelatedGot a question regarding 2921 modules. Can I use VWIC2-2MFT-T1/E1 along with NM-HDV2-2T1/E1 on 2921 and what is the minimum requirements for IOS image?
As I understand, NM-HDV2-2T1/E1 is supported on 2921, however VWIC2-2MFT-T1/E1 is not, VWIC-2MFT-T1/E1 only. But VWIC-2MFT-T1/E1 is not supported on 2921.
I've a problem with a router 2811:
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
[Code]......
I purchased a used AIR BR1310G-A--K9-R from a local high school that was rebuilding their athletic field. The AP was used for communications for their pressbox staff. The AIR BR1310G was part of the schools campus wide WiFi network and was upgraded to an lwapp image c1310-k9w8-m 12.4 3c JA. Our home sits on a large lot and I would like to convert the BR1310G back to an autonomous AP.
In order convert it back to an automonous AP, I will need the original image. The school used a contractor for their WiFi network and they do not have a backup of the original image. I do not have a service account with Cisco so downloading the autonomous image from the Cisco website is out. What are my options for either obtaining an image file or using the current managed image without a WLC?
I wanna upload ios image of 36mb on a 2801 but I get error not available space. The router already has ios image of 40mb and available space is around 15mb. How to delete existing image and upload the new image?
View 7 Replies View Related