I have downloaded material to a site many years ago and now that site appears first when my name is typed at Google Search. The problem is that I've written many e-mails to the site manager and he is not answering. Is there any way to delete this site from my Google search?
View 2 RepliesUnsure if this is the correct forum but here goes.....I just installed the Google Chrome and after doing so it has been a hair pulling problem so to say. Now when I do a search with google almost every time it looks like the information site listed I click on it and am redirected to another search and if I try to go back to google search it will not let me off the page. I end up having to close that window and open a new window and research again on google. I open my old internet explorer and the same thing happens there now.
View 2 Replies View RelatedI work on photocopiers and sometimes I get an error code that's not in the service manual.[URL]contains some useful information so I use Google to search the forums for example:It has recently stopped working on my computer and another at work. Copytechnet loads breifly then windows says unable to connect to site and internet explorer closes.
View 1 Replies View RelatedMy google search has recently stopped working in both IE and firefox. When i search bing or yahoo they work just fine. I have tried using google.com an also tried using the toobar on my computer.
View 6 Replies View RelatedJust setting up and testing a Cisco 891-K9 router. Used CCP for basic setup, figure I'll tweak any settings needed later.For the firewall, I chose the default "medium" security setting in CCP, then added some holes (already setup in NAT) for outside access in.
Now on to the real question:I noticed that I am now unable to click through google search results. On any borwser. Clicking on any search result simply loops back around to the same google search page. If I disable Javascript on the browser, everything works as expected. So it appears that the firewall is preventing something in google's scripts from redirecting and "clicking through" to the final destination page.
I'm familiar with our old Pix firewall commands, but still a relative newcomer to the zone based firewall and commands for this new 891, (relevant Config pasted below) (Gi0 is the WAN interface)
!
!
multilink bundle-name authenticated
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
[code]....
I have a requirement to create a site to site vpn tunnel on ASA 5510 from a remote site to my HO, ihave already other site-to-site tunnels are up and running on the ASA.The issue is my remote site has got the network address which falls in one of the subnet used in HO(192.168.10.0/24).My requirement is only My remote site need to accees couple of my servers in HO which is in 192.168.200.0/24 subnet.
View 2 Replies View RelatedI am runing Windows 7 Ultimate on my Media Station i cannot access Google or my E-Mail it says internet not connected which clearly it is,i am absolutly a no brainer when
View 1 Replies View RelatedMy computer won't connect to any of Google's servers. ANY of them. Gmail, docs, reader, nothin. I can visit youtube, but I cannot get to the log-in page. EVERY other site works pretty well. Heck, even using a site that uses a Recaptcha it doesn't load the recaptcha!Nothing wrong with my hosts file.
Tracert results in 6 successful hops and then times out (I think at my ISP?)
the last 2 successful hops are
chnddsrj01-ae2.0.rd.ph.cox.net
And then
langbprj02-ae2.rd.la.cox.net
Then all time outs
My other PC is connected to the SAME wifi network right now, and I'm posting from it, and it works fine. Both are on XP. Reboots haven't worked. Happens on all browsers. Every other website I can find is just fine.
i have configure Webserver IIS on windows server 2008 i can access it on same computer i configure it but i can't access it on another computer
View 2 Replies View RelatedThe DNS comes request timed out while pinging and i am unable to browse. But the Same LAN cable is working fine in another pc. I can ping the Gate way. But not able to ping DNS.Local Network is working fine.
View 1 Replies View RelatedWhen I want to open youtube or facebook,the mesage appear as "The site is blocked by netgear"
View 1 Replies View RelatedUsers are connecting to Site A (PIX 515e) via Cisco VPN client and can access servers/resources within that site no problem. They cannot access anything within Site B (ASA 5505) however. Devices communicating between Site A and Site B have no issues (have site to site VPN configured). I'm assuming that I'm missing something in configuration - or is it not possible for VPN clients connected to the PIX firewall and access data on the other network?
View 1 Replies View RelatedHow do I delete a file using command prompt from one computer to another....
View 5 Replies View RelatedI would like to know how to delete a connection from my network. When I connect to the Wii it automatically chooses the right connection. What I have noticed though is that there is a third connection for a printer that is not secured and I have no idea why it is there or has an option to connect to the internet.
View 4 Replies View RelatedI recently deleted some devices from LMS. Now, when I run a device credential report, I get the following for the devices that were deleted. Device has been deleted, or is not managed by LMS.
View 1 Replies View RelatedWe have ordered a pair of Cisco ASA5520 (ASA5520-BUN-K9).Now there is a requirement to terminate site-to-site VPN from remote site. Do we need VPN plus licence for this and how much it cost?
View 1 Replies View RelatedThe scenario where a Site to Site VPN tunnel has been established between Site A and Site B. Lan on Site A can ping Lan on Site B. My problem is a Printer behind Site B needs to be accessed by using the WAN IP address of Site A. Also i could not ping the remote lan or printer from the router.
Below are my configure on the Cisco 877 in site A.
Building configuration...
Current configuration : 5425 bytes
!
! Last configuration change at 15:09:21 PCTime Fri Jun 15 2012 by admin01
!
version 12.4
no service pad
[code]....
cisco products and am struggling getting a VPN going between an ASA 5505 and 5510. I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).
View 11 Replies View RelatedWe have configuration of Etherchannel in Cisco 6509 connecting to Cisco 6513 switch, both running on CatOS. This is a group of 8 ports in 6509, due to some reasons one port in Etherchannel group went bad. I have disabled that bad port now. Now I have to delete that bad port from etherchannel group (First task) and add a new port to the group ( 2nd task). I have tried many cisco documents to completely delete the etherchannel port, but no use.
View 8 Replies View RelatedI was trying to erase my lab router 2600 and reset it back to the factory defaults. Well I was able to to reset it all right but I used the erase command which worked a little to well. So now there is no IOS and the router is in ROM mode and I didnt back up the pervious IOS "Nice". So was able to get an updated IOS for my 2600 but I'm trying to install it and don't know how. I was able to get a tftp server app for my windows pc but I'm unsure on how to configure it so I can transfer the new IOS to the router. On the up side I did learn something erasing and reset are to very different things.
View 6 Replies View RelatedMy network name is AKY and I lost my password.
View 1 Replies View RelatedI want to search hidden ssid names means non broadcast ssid.
View 2 Replies View RelatedI recently deleted an account off of my computer, it was just the account I didn't use that had no password, it was not the admin or administrator account. So I deleted it, and went to bed, I woke up the next day and my computer was just finishing installing an update, after it restarted my internet does not work and it has the yellow caution triangle over top. I troubleshooted, and got the message "windows could not automatically detect proxy settings"When I open network and sharing center it would say "identifying" forever and not identify I guess.The weird thing is, my sisters computer and my old computer can connect to the internet fine. I tried bringing my computer next to the router/modem(not sure of the difference) and i plugged the ethernet cord directly into the modem/router into my computer, and it's the same thing. The most annoying thing is that i cannot do a system restore as i have not set it up before hand.(yes i know that is a very novice mistake
View 2 Replies View RelatedI am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Replies View RelatedA bit of a Catch-22 here: I am trying to delete VPN Group Policies but receive the error message that the policy is in use by a particular Connection Profile. When I try to delete the Connection Profile I receive the message that it is in use by a VPN Group Policy..
What else is there to delete or do I have to use the CLI?
I have windows 7. Search engines worked fine when first used, now all I get are errors, With IE9 and Firefox.
View 1 Replies View RelatedWe have a lot of 6913's handling our office ports and I'd like to know a simple way to find multiple ports knowing their description.
I'm use to Juniper so if I were looking for the 8 ports for the office's 3190-3199 I would type something similar to:
show | display set | match 319
I know I can use | include with a show run on Cisco but that won't pull the interface just the description.
A few days ago, all search engines stopped working on my computer on both IE and Firefox. Everything else works fine and I can surf the net using specific URLs but I can search for anything. I have tried a number of options and various anti-virus, spyware and malware scans but no infections are ever found. I have used, AVG, windows defender, and Malwarebytes.
View 16 Replies View RelatedI run an Allen & Heath digital mixer. The iDr32 mixrack sits on the stage and has a 2 port Ethernet switch on board, which allows the device to be controlled with a PC. If you then add a WiFi router then you can have wireless remote control from a laptop. Allen & Heath also sell an app for iPad to do the same. I have this working quite well although I am receiving no metering data from the Mixrack. Allen & Heath say this is probably because my router does not support multicasting. They list some routers which are recommended, but the list is rather out of date. I am trying to find a suitable dual band router with decent range on both bands. I would prefer a cable type, but since it will not be connected to the internet, it isn't important. When I Google "Multicast capable wifi router" all that comes up is a lot of stuff about video streaming. None of the manufacturers seem to list if their product supports multicasting. I understand that multicasting is usually used for video streaming, but in my case it seems to be a requirement to speed up data between the iPad and the Mixrack. Apparently some users of similar systems have encountered problems with multiple smartphone users in the audience seeking WiFi connections. The solution to this is to use 5GHz band, and switch off the SSID. Some have also found it best to use MAC filtering for security.
View 4 Replies View RelatedI use a MS-6728-090 (865PE Neo2p) and can't find the right driver for the onboard lan.
View 1 Replies View RelatedI have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies View RelatedI have ASA 5505, i configured site to site vpn between central site and remote site and is working. Now the problem is we use remote site for troubleshooting purpose, so we need to create a tunnel from remote site to central site. I need to configure such a way that remote site can craete a tunnel to central site, but central site not able to create a tunnel, it just respond to remote site.
View 3 Replies View Relatedi have 2 router asa 5505 with base license i wanna make site to site vpn connection and remote site using vpn client to connect first i have hdsl router with 5 public ip i wanna try it by giving 1 public ip to each router and try the vpn but nothing work?
View 1 Replies View Related